Re: Connlimit problem

["Omar Garcia" <omar.garcia@fractalia.biz>]

No effect, the same responsed.

# iptables -t filter -A FORWARD -m connlimit --connlimit-above 100 -j DROP
iptables: No chain/target/match by that name

# iptables -t filter -A OUTPUT -m connlimit --connlimit-above 100 -j DROP
iptables: No chain/target/match by that name


----- Original Message ----- 
From: "Samuel Díaz García" <samueldg@arcoscom.com>
To: "Omar Garcia" <omar.garcia@fractalia.biz>
Sent: Wednesday, January 26, 2005 3:57 PM
Subject: Re: Connlimit problem


> It is working in "filter" table, not in mangle.
>
> Try it, I think connlimit is only for filters.
>
> Say us.
>
> Omar Garcia escribió:
> > Hi list,
> >
> > I try to configurate a transparent bridge with QoS
> > I have a pentium computer with two network cards, kernel 2.6.8 with
IMQ,WRR,IPP2P and other more patched.
> >
> > The problem is when i try to include the following rule:
> >
> >  iptables -A PREROUTING -t mangle -m connlimit --connlimit-above 100 -j
DROP
> >
> > If i tried in two steps, i confirm that the module connlimit is
installed:
> >
> > BridgeWall:/home/omar# iptables -A PREROUTING -t mangle -m connlimit
> >     iptables v1.2.11: You must specify `--connlimit-above'
> >     Try `iptables -h' or 'iptables --help' for more information.
> >
> >
> >  BridgeWall:/home/omar# iptables -A PREROUTING -t mangle -m
connlimit --connlimit-above 12 -j DROP
> >      iptables: No chain/target/match by that name
> > Any idea????
> >
> > Thanks in advange.
> >
> > Regards
> >
> >
>
> -- 
>     Samuel Díaz García
>      Director Gerente
> ArcosCom Wireless, S.L.L.
>
> mailto:samueldg@arcoscom.com
> http://www.arcoscom.com
> móvil: 651 93 72 48
> tlfn/fax: 956 70 13 15
>