Linux Netfilter discussions
 help / color / mirror / Atom feed
From: "Mardaga Stephan" <smardaga@brutele.be>
To: netfilter@lists.netfilter.org
Subject: Re: Masquerade don't masquerade
Date: Wed, 25 Aug 2004 21:36:47 +0200	[thread overview]
Message-ID: <004c01c48adb$5b3cf910$c6ea44d4@famille> (raw)
In-Reply-To: 3063e5040825121849d03e03@mail.gmail.com

Here are :

> The -L output is not enough,
> try iptables-save -t nat

# Generated by iptables-save v1.2.6a on Wed Aug 25 21:28:05 2004
*nat
:PREROUTING ACCEPT [631:81365]
:POSTROUTING ACCEPT [60:18132]
:OUTPUT ACCEPT [60:18132]
-A POSTROUTING -j LOG
-A POSTROUTING -s 192.168.1.0/255.255.255.0 -o eth0 -j MASQUERADE
-A POSTROUTING -j LOG
COMMIT
# Completed on Wed Aug 25 21:28:05 2004


> Also make sure you don't filter stuff in -t filter chain FORWARD

Chain INPUT (policy ACCEPT)
target     prot opt source               destination

Chain FORWARD (policy ACCEPT)
target     prot opt source               destination

Chain OUTPUT (policy ACCEPT)
target     prot opt source               destination


> And, did you echo 1 > /proc/sys/net/ipv4/ip_forward ? :D

yes



>
> On Wed, 25 Aug 2004 21:05:07 +0200, Mardaga Stephan <smardaga@brutele.be>
wrote:
> > Hello,
> >
> > I'm new on this forum and hope you will help me.
> >
> > I'm building a Debian server and it is the basic stage.
> > I wish to run Iptables with masquerade.
> >
> > detailed problem report could be find @ this address :
> > http://homeusers.brutele.be/smardaga/masquerade/
> >
> > resume :
> >
> >  PC1                      Debian Serveur                     PC2
> >  |                       Eth0      Eth1                      |
> >  |.1                    .50|         |.1                   .2|
> >  |                         |         |                       |
> >  |                         |         |                       |
> >  ---------------------------         -------------------------
> >       192.168.0.x/24                       192.168.1.x/24
> >
> > Masquerade don't work when pinging from PC2 (192.168.1.2) to PC1
> > (192.168.0.1). PC1 receives icmp packet with IP source address
192.168.1.2.
> >
> > tcpdump on eth0 :
> >
> > 20:30:25.472725 192.168.1.2 > 192.168.0.1: icmp: echo request
> > 20:30:30.972679 192.168.1.2 > 192.168.0.1: icmp: echo request
> > 20:30:36.472321 192.168.1.2 > 192.168.0.1: icmp: echo request
> > 20:30:41.972217 192.168.1.2 > 192.168.0.1: icmp: echo request
> > 20:30:47.472049 192.168.1.2 > 192.168.0.1: icmp: echo request
> > 20:30:52.972084 192.168.1.2 > 192.168.0.1: icmp: echo request
> >
> >  iptables release 1.2.6a
> >  Linux  2.4.18-bf2.4 #1 Son Apr 14 09:53:28 CEST 2002 i686 unknown
> >
> > Chain PREROUTING (policy ACCEPT)
> > target     prot opt source               destination
> >
> > Chain POSTROUTING (policy ACCEPT)
> > target     prot opt source               destination
> > LOG        all  --  anywhere             anywhere           LOG level
> > warning
> > MASQUERADE  all  --  192.168.1.0/24       anywhere
> > LOG        all  --  anywhere             anywhere           LOG level
> > warning
> >
> > Chain OUTPUT (policy ACCEPT)
> > target     prot opt source               destination
> >
> > Any help and/or suggestions will be accepted gratefully.
> >
> > Thanks in advance,
> >
> > Stephan Mardaga
> >
> >
>
>
> --
> Bla bla
>



  reply	other threads:[~2004-08-25 19:36 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-08-25 19:05 Masquerade don't masquerade Mardaga Stephan
2004-08-25 19:18 ` George Alexandru Dragoi
2004-08-25 19:36   ` Mardaga Stephan [this message]
  -- strict thread matches above, loose matches on Subject: below --
2004-08-25 19:18 Jason Opperisano
2004-08-25 19:40 ` Mardaga Stephan
2004-08-29 11:47   ` Mardaga Stephan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='004c01c48adb$5b3cf910$c6ea44d4@famille' \
    --to=smardaga@brutele.be \
    --cc=netfilter@lists.netfilter.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox