Sarky,

I don't think this is going to work... both of your IP addresses on

the ethernet cards fall inside the *same* network block if you

use the subnet masks that you have.

This is a basic IP networking issues that you have to resolve

first.

Mike

----- Original Message -----

From: sarky

To: netfilter

Sent: Sunday, March 30, 2003 11:05 PM

Subject: Routing Issue Between 2 Network Cards

Hi all

I have a machine with 2 Network Cards

Hub: 192.116.121.2 upto 127 is attached

Ether1: 192.116.121.119 subnet:255.255.255.128

Ether2: 192.116.121.120 subnet:255.255.255.128

Gateway:192.116.121.1

I want to route all incoming from the Hub through 119 out of 120 into the Gateway the reason for such a thing is so i can filter all the incomings and outgoings through that point.

Attached is a Diagram just to show what i have.

Thank you

Sarky