From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?iso-8859-1?Q?Sebasti=E3o_Ant=F4nio_Campos_=28GWA=29?= Subject: Prob with REDIRECT + SQUID + IPTABELS + IPROUTE2 Date: Thu, 23 Jun 2005 21:41:10 -0300 Message-ID: <03c201c57855$6d91c470$8b00000a@PIVT> Reply-To: =?iso-8859-1?Q?Sebasti=E3o_Ant=F4nio_Campos_=28GWA=29?= Mime-Version: 1.0 Content-Transfer-Encoding: quoted-printable Return-path: List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: netfilter-bounces@lists.netfilter.org Errors-To: netfilter-bounces@lists.netfilter.org Content-Type: text/plain; charset="iso-8859-1" To: netfilter@lists.netfilter.org Someone could help me??? I have two links to internet, one by ADSL (512 kbps) e other EMBRATEL ( = 1024=20 Kpbs ). I did "ip route" e it happen ok, but whem I put the with iptables to = traffic=20 on 80 port redirect to 3128 port of SQUID, I can only use the ADSL link, = what is default link. The configurations: ( ADSL 512K ) eth0 Server IP =3D 192.168.7.2 Modem IP =3D 192.168.7.1 ( EMBRATEL 1024K ) eth1 Server IP =3D 200.200.200.2 Router IP =3D 200.200.200.1 ( LAN 1) eth2 Server IP =3D 10.0.0.1 LAN =3D 10.0.0.0/24 ( LAN 2) eth2:1 Server IP =3D 192.168.0.1 LAN =3D 192.168.0.0/24 #iptables -t nat -A POSTROUTING -o eth0 -s 192.168.0.0/24 -j=20 SNAT --to-soutce 192.168.7.1 #iptables -t nat -A POSTROUTING -o eth1 -s 10.0.0.20 -j SNAT --to-soutce = 200.200.200.2 #ip rule add from 10.0.0.20/32 table embratel #ip route add 200.200.200.1 dev eth1 table embratel #ip route add default via 200.200.200.1 table embratel #ip route add 10.0.0.20/32 via 10.0.0.1 table embratel Here everything is workingm, but when I put the following rule....the=20 traffic goes to only ADSL Link that is the default gateway. #iptables -t nat -A PREROUTING -p tcp -i eth2 --dport 80 -j=20 REDIRECT --to-port 3128 I am some help me. Tks Sebasti=E3o Ant=F4nio Campos