From: "Ing. CIP Alejandro Celi "Mariategui <alex@linux.org.pe>
To: Jan Du Caju <Jan.DuCaju@kuleuven.net>
Cc: netfilter@lists.netfilter.org
Subject: RE: IPLIMIT Patch UDP
Date: 24 Feb 2003 15:41:00 -0500 [thread overview]
Message-ID: <1046119262.1237.18.camel@alex.pcprices.com.pe> (raw)
In-Reply-To: <20030221214109.GB19981@kuleuven.net>
Thank You very much, Jan and Joel, I will try with udplimit right now!!!
Alex
El vie, 21-02-2003 a las 16:41, Jan Du Caju escribió:
Hi again,
Jan Du Caju wrote:
> > Ing. CIP Alejandro Celi Mariategui wrote:
> >
> > (Sorry, but my english is very bad)
> > Hi,
> > I compile with p-o-m the server kernel with IPLIMIT Patch by Gerd
> > Knorr
> > [1]<kraxel@bytesex.org>
> > It work fine, i can limit ex: max 10 TCP connections on the server,
> > but i want to limit the UDP connections to 10 (max).
> > How I can do it?
> This week I made a updlimit patch (shameless copy of iplimit ;-)
> I will post it this afternoon/evening when I have more time (and
> a cross post to the netfilter-devel list. Maybe they like it)
In attachment you will find:
udplimit.patch
udplimit.patch.config.in
udplimit.patch.configure.help
udplimit.patch.help
udplimit.patch.makefile
put those under <patch-o-matic>/base/ directory
in the <patch-o-matic> directory you run: ./runme base
(don't forget to select udplimit ;-)
recompile your kernel (with Connections/UDP limit match support
CONFIG_IP_NF_MATCH_UDPLIMIT ;-)
Place the other file attachment (libipt_udplimit.c) in the directory
<iptables>/extensions/
in this directory you will also find the file Makefile where you add
udplimit just after iplimit
recompile iptables
Hope this helps (it works for me :-)
Greetz,
Jan.
--------------------------------------------- KULeuvenNet -----
____________________________________________________________________
diff -urN -x *~ -x [Cc]onfig.* -x Makefile vanilla-2.4.21-pre4/net/ipv4/netfilter/ipt_udplimit.c linux-2.4.21-pre4/net/ipv4/netfilter/ipt_udplimit.c
--- vanilla-2.4.21-pre4/net/ipv4/netfilter/ipt_udplimit.c Fri Feb 21 17:20:55 2003
+++ linux-2.4.21-pre4/net/ipv4/netfilter/ipt_udplimit.c Fri Feb 21 17:17:38 2003
@@ -0,0 +1,215 @@
+/*
+ * netfilter module to limit the number of parallel udp
+ * connections per IP address.
+ * Jan Du Caju <Jan.DuCaju@kuleuven.net>
+ *
+ * based on ...
+ * iplimit (in fact a shameless copy ;-)
+ * (c) 2000 Gerd Knorr <kraxel@bytesex.org>
+ * Nov 2002: Martin Bene <martin.bene@icomedias.com>:
+ * only ignore TIME_WAIT or gone connections
+ *
+ *
+ * Kernel module to match connection tracking information.
+ * GPL (C) 1999 Rusty Russell (rusty@rustcorp.com.au).
+ */
+#include <linux/module.h>
+#include <linux/skbuff.h>
+#include <linux/list.h>
+#include <linux/netfilter_ipv4/ip_conntrack.h>
+#include <linux/netfilter_ipv4/ip_conntrack_core.h>
+#include <linux/netfilter_ipv4/ip_tables.h>
+#include <linux/netfilter_ipv4/ipt_iplimit.h>
+
+#define DEBUG 0
+
+MODULE_LICENSE("GPL");
+
+/* we'll save the tuples of all connections we care about */
+struct ipt_iplimit_conn
+{
+ struct list_head list;
+ struct ip_conntrack_tuple tuple;
+};
+
+struct ipt_iplimit_data {
+ spinlock_t lock;
+ struct list_head iphash[256];
+};
+
+static int ipt_iphash(u_int32_t addr)
+{
+ int hash;
+
+ hash = addr & 0xff;
+ hash ^= (addr >> 8) & 0xff;
+ hash ^= (addr >> 16) & 0xff;
+ hash ^= (addr >> 24) & 0xff;
+ return hash;
+}
+
+static int count_them(struct ipt_iplimit_data *data,
+ u_int32_t addr, u_int32_t mask,
+ struct ip_conntrack *ct)
+{
+ int addit = 1, matches = 0;
+ struct ip_conntrack_tuple tuple;
+ struct ip_conntrack_tuple_hash *found;
+ struct ipt_iplimit_conn *conn;
+ struct list_head *hash,*lh;
+
+ spin_lock(&data->lock);
+ tuple = ct->tuplehash[0].tuple;
+ hash = &data->iphash[ipt_iphash(addr & mask)];
+
+ /* check the saved connections */
+ for (lh = hash->next; lh != hash; lh = lh->next) {
+ conn = list_entry(lh,struct ipt_iplimit_conn,list);
+ found = ip_conntrack_find_get(&conn->tuple,ct);
+ if (0 == memcmp(&conn->tuple,&tuple,sizeof(tuple)) &&
+ found != NULL) {
+ addit = 0;
+ }
+#if DEBUG
+ printk("ipt_udplimit [%d]: src=%u.%u.%u.%u:%d dst=%u.%u.%u.%u:%d\n",
+ ipt_iphash(addr & mask),
+ NIPQUAD(conn->tuple.src.ip), ntohs(conn->tuple.src.u.udp.port),
+ NIPQUAD(conn->tuple.dst.ip), ntohs(conn->tuple.dst.u.udp.port));
+#endif
+ if (NULL == found) {
+ /* this one is gone */
+ lh = lh->prev;
+ list_del(lh->next);
+ kfree(conn);
+ continue;
+ }
+ if ((addr & mask) == (conn->tuple.src.ip & mask)) {
+ /* same source IP address -> be counted! */
+ matches++;
+ }
+ nf_conntrack_put(&found->ctrack->infos[0]);
+ }
+ if (addit) {
+ /* save the new connection in our list */
+#if DEBUG
+ printk("ipt_udplimit [%d]: src=%u.%u.%u.%u:%d dst=%u.%u.%u.%u:%d new\n",
+ ipt_iphash(addr & mask),
+ NIPQUAD(tuple.src.ip), ntohs(tuple.src.u.tcp.port),
+ NIPQUAD(tuple.dst.ip), ntohs(tuple.dst.u.tcp.port));
+#endif
+ conn = kmalloc(sizeof(*conn),GFP_ATOMIC);
+ if (NULL == conn)
+ return -1;
+ memset(conn,0,sizeof(*conn));
+ INIT_LIST_HEAD(&conn->list);
+ conn->tuple = tuple;
+ list_add(&conn->list,hash);
+ matches++;
+ }
+ spin_unlock(&data->lock);
+ return matches;
+}
+
+static int
+match(const struct sk_buff *skb,
+ const struct net_device *in,
+ const struct net_device *out,
+ const void *matchinfo,
+ int offset,
+ const void *hdr,
+ u_int16_t datalen,
+ int *hotdrop)
+{
+ const struct ipt_iplimit_info *info = matchinfo;
+ int connections, match;
+ struct ip_conntrack *ct;
+ enum ip_conntrack_info ctinfo;
+
+ ct = ip_conntrack_get((struct sk_buff *)skb, &ctinfo);
+ if (NULL == ct) {
+ printk("ipt_udplimit: Oops: invalid ct state ?\n");
+ *hotdrop = 1;
+ return 0;
+ }
+ connections = count_them(info->data,skb->nh.iph->saddr,info->mask,ct);
+ if (-1 == connections) {
+ printk("ipt_udplimit: Hmm, kmalloc failed :-(\n");
+ *hotdrop = 1; /* let's free some memory :-) */
+ return 0;
+ }
+ match = (info->inverse) ? (connections <= info->limit) : (connections > info->limit);
+#if DEBUG
+ printk("ipt_udplimit: src=%u.%u.%u.%u mask=%u.%u.%u.%u "
+ "connections=%d limit=%d match=%s\n",
+ NIPQUAD(skb->nh.iph->saddr), NIPQUAD(info->mask),
+ connections, info->limit, match ? "yes" : "no");
+#endif
+
+ return match;
+}
+
+static int check(const char *tablename,
+ const struct ipt_ip *ip,
+ void *matchinfo,
+ unsigned int matchsize,
+ unsigned int hook_mask)
+{
+ struct ipt_iplimit_info *info = matchinfo;
+ int i;
+
+ /* verify size */
+ if (matchsize != IPT_ALIGN(sizeof(struct ipt_iplimit_info)))
+ return 0;
+
+ /* refuse anything but udp */
+ if (ip->proto != IPPROTO_UDP)
+ return 0;
+
+ /* init private data */
+ info->data = kmalloc(sizeof(struct ipt_iplimit_data),GFP_KERNEL);
+ spin_lock_init(&(info->data->lock));
+ for (i = 0; i < 256; i++)
+ INIT_LIST_HEAD(&(info->data->iphash[i]));
+
+ return 1;
+}
+
+static void destroy(void *matchinfo, unsigned int matchinfosize)
+{
+ struct ipt_iplimit_info *info = matchinfo;
+ struct ipt_iplimit_conn *conn;
+ struct list_head *hash;
+ int i;
+
+ /* cleanup */
+ for (i = 0; i < 256; i++) {
+ hash = &(info->data->iphash[i]);
+ while (hash != hash->next) {
+ conn = list_entry(hash->next,struct ipt_iplimit_conn,list);
+ list_del(hash->next);
+ kfree(conn);
+ }
+ }
+ kfree(info->data);
+}
+
+static struct ipt_match udplimit_match
+= { { NULL, NULL }, "udplimit", &match, &check, &destroy, THIS_MODULE };
+
+static int __init init(void)
+{
+ /* NULL if ip_conntrack not a module */
+ if (ip_conntrack_module)
+ __MOD_INC_USE_COUNT(ip_conntrack_module);
+ return ipt_register_match(&udplimit_match);
+}
+
+static void __exit fini(void)
+{
+ ipt_unregister_match(&udplimit_match);
+ if (ip_conntrack_module)
+ __MOD_DEC_USE_COUNT(ip_conntrack_module);
+}
+
+module_init(init);
+module_exit(fini);
____________________________________________________________________
dep_tristate ' Connection state match support' CONFIG_IP_NF_MATCH_STATE $CONFIG_IP_NF_CONNTRACK $CONFIG_IP_NF_IPTABLES
dep_tristate ' Connections/UDP limit match support' CONFIG_IP_NF_MATCH_UDPLIMIT $CONFIG_IP_NF_IPTABLES
____________________________________________________________________
obj-$(CONFIG_IP_NF_MATCH_STATE) += ipt_state.o
obj-$(CONFIG_IP_NF_MATCH_UDPLIMIT) += ipt_udplimit.o
____________________________________________________________________
Author: Gerd Knorr <kraxel@bytesex.org>
Jan Du Caju <Jan.DuCaju@kuleuven.net> (I just made a shameless copy
of iplimit of Gerd Knorr ;-)
Status: ItWorksForMe[tm]
This adds CONFIG_IP_NF_MATCH_UDPLIMIT match allows you to restrict the
number of parallel UDP connections to a server per client IP address
(or address block).
Examples:
# allow 5 udp connections per client host
iptables -p udp -m udplimit --udplimit-above 5 -j REJECT
# you can also match the other way around:
iptables -p udp -m udplimit ! --udplimit-above 5 -j ACCEPT
# limit the nr of parallel http requests to 16 per class C sized
# network (24 bit netmask)
iptables -p udp --dport 161 -m udplimit --udplimit-above 16 \
--iplimit-mask 24 -j REJECT
____________________________________________________________________
CONFIG_IP_NF_MATCH_STATE
Connections/UDP limit match support
CONFIG_IP_NF_MATCH_UDPLIMIT
This match allows you to restrict the number of parallel UDP
connections to a server per client IP address (or address block).
If you want to compile it as a module, say M here and read
Documentation/modules.txt. If unsure, say `N'.
____________________________________________________________________
/* Shared library add-on to iptables to add state tracking support. */
#include <stdio.h>
#include <netdb.h>
#include <string.h>
#include <stdlib.h>
#include <stddef.h>
#include <getopt.h>
#include <iptables.h>
#include <linux/netfilter_ipv4/ip_conntrack.h>
#include <linux/netfilter_ipv4/ipt_iplimit.h>
/* Function which prints out usage message. */
static void
help(void)
{
printf(
"udplimit v%s options:\n"
"[!] --udplimit-above n match if the number of existing udp connections is (not) above n\n"
" --udplimit-mask n group hosts using mask\n"
"\n", IPTABLES_VERSION);
}
static struct option opts[] = {
{ "udplimit-above", 1, 0, '1' },
{ "udplimit-mask", 1, 0, '2' },
{0}
};
/* Initialize the match. */
static void
init(struct ipt_entry_match *m, unsigned int *nfcache)
{
/* Can't cache this */
*nfcache |= NFC_UNKNOWN;
}
/* Function which parses command options; returns true if it
ate an option */
static int
parse(int c, char **argv, int invert, unsigned int *flags,
const struct ipt_entry *entry,
unsigned int *nfcache,
struct ipt_entry_match **match)
{
struct ipt_iplimit_info *info = (struct ipt_iplimit_info*)(*match)->data;
if (0 == (*flags & 2)) {
/* set default mask unless we've already seen a mask option */
info->mask = htonl(0xFFFFFFFF);
}
switch (c) {
case '1':
check_inverse(optarg, &invert, &optind, 0);
info->limit = atoi(argv[optind-1]);
info->inverse = invert;
*flags |= 1;
break;
case '2':
info->mask = htonl(0xFFFFFFFF << (32 - atoi(argv[optind-1])));
*flags |= 2;
break;
default:
return 0;
}
return 1;
}
/* Final check */
static void final_check(unsigned int flags)
{
if (!flags & 1)
exit_error(PARAMETER_PROBLEM, "You must specify `--udplimit-above'");
}
static int
count_bits(u_int32_t mask)
{
int i, bits;
for (bits = 0, i = 31; i >= 0; i--) {
if (mask & htonl((u_int32_t)1 << i)) {
bits++;
continue;
}
break;
}
return bits;
}
/* Prints out the matchinfo. */
static void
print(const struct ipt_ip *ip,
const struct ipt_entry_match *match,
int numeric)
{
struct ipt_iplimit_info *info = (struct ipt_iplimit_info*)match->data;
printf("#conn/%d %s %d ", count_bits(info->mask),
info->inverse ? "<" : ">", info->limit);
}
/* Saves the matchinfo in parsable form to stdout. */
static void save(const struct ipt_ip *ip, const struct ipt_entry_match *match)
{
struct ipt_iplimit_info *info = (struct ipt_iplimit_info*)match->data;
printf("%s--udplimit-above %d ",info->inverse ? "! " : "",info->limit);
printf("--udplimit-mask %d ",count_bits(info->mask));
}
static struct iptables_match udplimit = {
name: "udplimit",
version: IPTABLES_VERSION,
size: IPT_ALIGN(sizeof(struct ipt_iplimit_info)),
userspacesize: offsetof(struct ipt_iplimit_info,data),
help: help,
init: init,
parse: parse,
final_check: final_check,
print: print,
save: save,
extra_opts: opts
};
void _init(void)
{
register_match(&udplimit);
}
next prev parent reply other threads:[~2003-02-24 20:41 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-02-21 21:41 IPLIMIT Patch UDP Jan Du Caju
2003-02-24 20:41 ` Ing. CIP Alejandro Celi Mariategui [this message]
-- strict thread matches above, loose matches on Subject: below --
2003-01-30 20:48 Looking for Log Analyzer Susan Sagan
2003-02-19 16:26 ` Hervé Eychenne
2003-02-20 23:50 ` IPLIMIT Patch UDP Ing. CIP Alejandro Celi Mariategui
2003-02-21 8:12 ` Jan Du Caju
2003-02-21 8:22 ` Joel Newkirk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1046119262.1237.18.camel@alex.pcprices.com.pe \
--to=alex@linux.org.pe \
--cc=Jan.DuCaju@kuleuven.net \
--cc=netfilter@lists.netfilter.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox