From mboxrd@z Thu Jan 1 00:00:00 1970 From: michael@floog.net Subject: Re: How to drop/reject packets amongst LAN clients? Date: Mon, 10 May 2004 11:26:17 -0700 Sender: netfilter-admin@lists.netfilter.org Message-ID: <1084213577.409fc949e1db4@webmail.floog.net> References: <1084206191.409fac6f1176a@webmail.floog.net> <409FB903.1090005@pbl.ca> Mime-Version: 1.0 Content-Transfer-Encoding: 8bit Return-path: In-Reply-To: <409FB903.1090005@pbl.ca> Errors-To: netfilter-admin@lists.netfilter.org List-Help: List-Post: List-Subscribe: , List-Id: List-Unsubscribe: , List-Archive: Content-Type: text/plain; charset="us-ascii" To: Aleksandar Milivojevic Cc: netfilter@lists.netfilter.org Aleksandar, Thanks for your guidance. It looks like I've got a fair amount of new reading to do after receiving Antony, Cedric, and your suggestion. I think I'll want to install the 3rd NIC, and do some more NAT'ing and/or Bridge'ing. First stop, www.tldp.org for review of documentation there. Second stop, man route and/or routed. I appreciate your help. Mike Quoting Aleksandar Milivojevic : > Second solution would be to put new server onto separate LAN. > 192.168.1.9 will become 192.168.2.9 (or whatever). Than clients on > your > first LAN (192.168.1.0/24) will have to talk to your firewall/router > to > get to the server on your second LAN (192.168.2.0/24). > > You will need one more ethernet card for second solution. If > additional > server is going to be the only host in second LAN, you can connect it > > directly with cross over cable. If you are going to add more servers > to > second LAN, you will also need additional hub or switch (do not > connect > two LANs into same hub). > > -- > Aleksandar Milivojevic Pollard Banknote