From mboxrd@z Thu Jan 1 00:00:00 1970 From: "jgalvez@webpipe.net" Subject: A secure router, by MAC address Date: Wed, 20 Oct 2004 12:46:06 -0600 Sender: netfilter-bounces@lists.netfilter.org Message-ID: <1098297965.5686.9.camel@6-allhosts> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: netfilter-bounces@lists.netfilter.org Content-Type: text/plain; charset="us-ascii" To: netfilter@lists.netfilter.org I am trying to setup a router, that forwards traffic from one interface for only a specific set of MAC addresses. Users on eth1 side will use a static IP address with a known MAC address. DHCP will be running on eth1 for rogue users. If the source IP is 10.0.0.0/8 all port 80 traffic needs to be redirected to localhost port 80. ONLY traffic from a listed IP and MAC should be allowed to be forwarded out. I need some recommendation on how to accomplish this. If you could point me to a similar example or something I can figure it out . The more specific the better. I have a few of my notes and attempts below. TIA -Josh eth0: -Allow all traffic, in and out eth1: -Allow all DHCP traffic - something like below #iptables -I INPUT -i eth1 -p udp --dport 67:68 --sport 67:68 \ -j ACCEPT -Allow all incoming traffic by source IP and MAC address #iptables -A PREROUTING -i eth1 -t mangle -m mac \ --source 208.5.x.242 --mac-source 00:30:65:0e:91:d6 -j ACCEPT -Redirect all port 80 traffic from 10.0.0.0/8 to localhost:80 -Drop all other incoming traffic #iptables -A PREROUTING -i eth1 -t mangle -j DROP