From: Joe Riley <irie@networks.org>
To: netfilter@lists.netfilter.org
Subject: Download/upload speeds sluggish behind iptables firewall
Date: Fri, 7 May 2004 13:19:01 -0700 (PDT) [thread overview]
Message-ID: <20040507201901.AEA423951@sitemail.everyone.net> (raw)
Dear mailing list,
I am having a problem with iptables. I have a very simple setup,
192.168.0.1 is the interface to the internet - receives speeds upward to 150kb/sec - and 192.168.0.2 is my windows xp computer, which is getting very crippled speeds of about 10-50kb/sec
i am asking what could be causing the problem here. i would like to make my 192.168.0.2's speed as fast as the firewall.
192.168.0.1 the server is fast, has no problem downloading files
and the 192.168.0.2 is slow, it is connected via crossover cable 100mbit
and the connection from the wireless is shared.
here is a snipling from ifconfig / iwconfig on the firewall displaying the MTU size, etc
---
this is the internal lan:
eth0 Link encap:Ethernet HWaddr 00:10:A4:01:B0:C7
inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:162037 errors:0 dropped:0 overruns:0 frame:0
TX packets:138247 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:14620652 (13.9 Mb) TX bytes:29320110 (27.9 Mb)
Interrupt:3 Base address:0x300
eth0:1 Link encap:Ethernet HWaddr 00:10:A4:01:B0:C7
inet addr:192.168.0.3 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Interrupt:3 Base address:0x300
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:308 errors:0 dropped:0 overruns:0 frame:0
TX packets:308 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:45106 (44.0 Kb) TX bytes:45106 (44.0 Kb)
---
this is my internet connection:
wlan0 Link encap:Ethernet HWaddr 00:07:50:XX:XX:B4
inet addr:65.xx.17x.1xx Bcast:65.xx.17x.255 Mask:255.255.255.0
UP BROADCAST NOTRAILERS RUNNING MULTICAST MTU:1500 Metric:1
RX packets:328868 errors:0 dropped:0 overruns:0 frame:0
TX packets:221065 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:201642105 (192.3 Mb) TX bytes:23570375 (22.4 Mb)
Interrupt:9 Base address:0x100
---
the eth0:1 (192.168.0.3) is because Windows XP on 192.168.0.2 required a secondary name server
if this is still not enough information for you to pinpoint the problem, maybe you can give me details of typical problems in the iptables configuration that cause such reductions of download speed.
i know it has to be something very minor like a kernel configuration problem or something. heres what i got in .config:
---
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_FILTER is not set
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_MULTIPLE_TABLES is not set
# CONFIG_IP_ROUTE_MULTIPATH is not set
# CONFIG_IP_ROUTE_TOS is not set
# CONFIG_IP_ROUTE_VERBOSE is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_FTP=m
# CONFIG_IP_NF_AMANDA is not set
# CONFIG_IP_NF_TFTP is not set
CONFIG_IP_NF_IRC=m
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
# CONFIG_IP_NF_MATCH_LIMIT is not set
# CONFIG_IP_NF_MATCH_MAC is not set
# CONFIG_IP_NF_MATCH_PKTTYPE is not set
# CONFIG_IP_NF_MATCH_MARK is not set
# CONFIG_IP_NF_MATCH_MULTIPORT is not set
# CONFIG_IP_NF_MATCH_TOS is not set
# CONFIG_IP_NF_MATCH_RECENT is not set
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_DSCP is not set
# CONFIG_IP_NF_MATCH_AH_ESP is not set
# CONFIG_IP_NF_MATCH_LENGTH is not set
# CONFIG_IP_NF_MATCH_TTL is not set
# CONFIG_IP_NF_MATCH_TCPMSS is not set
# CONFIG_IP_NF_MATCH_HELPER is not set
# CONFIG_IP_NF_MATCH_STATE is not set
# CONFIG_IP_NF_MATCH_CONNTRACK is not set
# CONFIG_IP_NF_MATCH_UNCLEAN is not set
# CONFIG_IP_NF_MATCH_OWNER is not set
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_MIRROR=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
# CONFIG_IP_NF_NAT_LOCAL is not set
# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
# CONFIG_IP_NF_MANGLE is not set
# CONFIG_IP_NF_TARGET_LOG is not set
# CONFIG_IP_NF_TARGET_ULOG is not set
# CONFIG_IP_NF_TARGET_TCPMSS is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
Here is output from iptables -L
Chain INPUT (policy ACCEPT)
target prot opt source destination
DROP tcp -- anywhere anywhere tcp flags:FIN,SYN,RST,PSH,ACK,URG/NONE
DROP tcp -- anywhere anywhere tcp flags:FIN,SYN/FIN,SYN
DROP tcp -- anywhere anywhere tcp flags:SYN,RST/SYN,RST
DROP tcp -- anywhere anywhere tcp flags:FIN,RST/FIN,RST
DROP tcp -- anywhere anywhere tcp flags:FIN,ACK/FIN
DROP tcp -- anywhere anywhere tcp flags:ACK,URG/URG
Chain FORWARD (policy ACCEPT)
target prot opt source destination
DROP tcp -- anywhere antec.latitude.org tcp dpt:commplex-main
DROP tcp -- anywhere antec.latitude.org tcp dpt:blackjack
DROP tcp -- anywhere antec.latitude.org tcp dpt:microsoft-ds
DROP tcp -- anywhere antec.latitude.org tcp dpt:netbios-ssn
DROP tcp -- anywhere antec.latitude.org tcp dpt:loc-srv
DROP udp -- anywhere antec.latitude.org udp dpt:ntp
DROP udp -- anywhere antec.latitude.org udp dpt:loc-srv
DROP udp -- anywhere antec.latitude.org udp dpt:netbios-ns
DROP udp -- anywhere antec.latitude.org udp dpt:netbios-dgm
DROP udp -- anywhere antec.latitude.org udp dpt:microsoft-ds
DROP udp -- anywhere antec.latitude.org udp dpt:isakmp
DROP udp -- anywhere antec.latitude.org udp dpt:iad3
DROP udp -- anywhere antec.latitude.org udp dpt:1900
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
---
and lastly here is the iptables firewall script I use:
---
ifconfig eth0 inet 192.168.0.1 netmask 255.255.255.0 broadcast 192.168.0.255
modprobe ip_tables
modprobe iptable_filter
modprobe ip_conntrack
modprobe ip_conntrack_ftp
modprobe ip_conntrack_irc
modprobe iptable_nat
modprobe ip_nat_ftp
modprobe ip_nat_irc
echo 1 > /proc/sys/net/ipv4/ip_forward
/usr/sbin/iptables -t nat -A PREROUTING -d 65.77.170.112 -p tcp --dport 1:64999 -j DNAT --to 192.168.0.2
/usr/sbin/iptables -t nat -A PREROUTING -d 65.77.170.112 -p udp --dport 1:65535 -j DNAT --to 192.168.0.2
/usr/sbin/iptables -t nat -A POSTROUTING -o wlan0 -s 192.168.0.2 -j MASQUERADE
/usr/sbin/iptables -t nat -P POSTROUTING ACCEPT
/usr/sbin/iptables -A FORWARD -d 192.168.0.2 -p tcp --dport 5000 -j DROP
/usr/sbin/iptables -A FORWARD -d 192.168.0.2 -p tcp --dport 1025 -j DROP
/usr/sbin/iptables -A FORWARD -d 192.168.0.2 -p tcp --dport 445 -j DROP
/usr/sbin/iptables -A FORWARD -d 192.168.0.2 -p tcp --dport 139 -j DROP
/usr/sbin/iptables -A FORWARD -d 192.168.0.2 -p tcp --dport 135 -j DROP
/usr/sbin/iptables -A FORWARD -d 192.168.0.2 -p udp --dport 123 -j DROP
/usr/sbin/iptables -A FORWARD -d 192.168.0.2 -p udp --dport 135 -j DROP
/usr/sbin/iptables -A FORWARD -d 192.168.0.2 -p udp --dport 137 -j DROP
/usr/sbin/iptables -A FORWARD -d 192.168.0.2 -p udp --dport 138 -j DROP
/usr/sbin/iptables -A FORWARD -d 192.168.0.2 -p udp --dport 445 -j DROP
/usr/sbin/iptables -A FORWARD -d 192.168.0.2 -p udp --dport 500 -j DROP
/usr/sbin/iptables -A FORWARD -d 192.168.0.2 -p udp --dport 1032 -j DROP
/usr/sbin/iptables -A FORWARD -d 192.168.0.2 -p udp --dport 1900 -j DROP
/usr/sbin/iptables -A INPUT -i wlan0 -p tcp -m tcp --tcp-flags FIN,SYN,RST,PSH,ACK,URG NONE -j DROP
/usr/sbin/iptables -A INPUT -i wlan0 -p tcp -m tcp --tcp-flags SYN,FIN SYN,FIN -j DROP
/usr/sbin/iptables -A INPUT -i wlan0 -p tcp -m tcp --tcp-flags SYN,RST SYN,RST -j DROP
/usr/sbin/iptables -A INPUT -i wlan0 -p tcp -m tcp --tcp-flags FIN,RST FIN,RST -j DROP
/usr/sbin/iptables -A INPUT -i wlan0 -p tcp -m tcp --tcp-flags ACK,FIN FIN -j DROP
/usr/sbin/iptables -A INPUT -i wlan0 -p tcp -m tcp --tcp-flags ACK,URG URG -j DROP
please give me some insightful ideas as to why this happening i have provided all the information i possibly can
- joe
_____________________________________________________________
Proud member of United Networks Email, visit or report abuse at http://networks.org/
next reply other threads:[~2004-05-07 20:19 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-05-07 20:19 Joe Riley [this message]
-- strict thread matches above, loose matches on Subject: below --
2004-05-07 20:27 Download/upload speeds sluggish behind iptables firewall Aldo Lagana
2004-05-07 20:19 Joe Riley
2004-05-07 20:12 Joe Riley
2004-05-07 20:30 ` Gavin Hamill
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20040507201901.AEA423951@sitemail.everyone.net \
--to=irie@networks.org \
--cc=netfilter@lists.netfilter.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox