From: George Alexandru Dragoi <waruiinu@gmail.com>
To: netfilter@lists.netfilter.org
Subject: Re: forward udp broadcast packets on same subnet /interface with diff source
Date: Wed, 14 Jul 2004 15:18:36 +0300 [thread overview]
Message-ID: <3063e5040714051837791ed4@mail.gmail.com> (raw)
In-Reply-To: <3063e50407132231c03fefc@mail.gmail.com>
Because i am not used with this mailing list, the message that follows
was sent before the ip_forward thingy, but arrived to tom only. And
one thing, you can always change routes for all sort of packets, like
DNAT of packets hich aparently rached theyr destination
---------- Forwarded message ----------
From: George Alexandru Dragoi <waruiinu@gmail.com>
Date: Wed, 14 Jul 2004 07:31:47 +0200
Subject: Re: forward udp broadcast packets on same subnet /interface
with diff source
To: Tom Thumb <tomthumb888@yahoo.com>
Take a loot here:
http://www.netfilter.org/patch-o-matic/pom-extra.html#pom-extra-ROUTE
My ideea (not tested) si to do an
iptables -t mangle -A PREROUTING -p udp -d 192.168.1.255 -s
192.168.1.6 -j ROUTE --gw 192.168.1.5 --continue
iptables -t mangle -A PREROUTING -p udp -d 192.168.1.255 -s
192.168.1.6 -j MARK --set-mark 0x1
then:
iptables -t nat -A POSTROUTING -m mark --mark 0x1 -j SNAT --to 192.168.1.7
On Tue, 13 Jul 2004 22:02:47 -0700 (PDT), Tom Thumb
<tomthumb888@yahoo.com> wrote:
> Hi,
>
> Can I use iptables to forward UDP broadcast packets on
> the same subnet and interface but just change the
> source IP?
>
> That is, the forwarding machine is 192.168.1.5, with
> mask 255.255.255.0 and has a single NIC.
>
> A machine with IP 192.168.1.6 with the same mask sends
> a UDP broadcast to 192.168.1.255.
>
> The forwarding machine receives this packet. Can it be
> configured to resend it out on the same interface that
> it received it on (its only interface) and just change
> the source IP to be a 3rd address, like 192.168.1.7,
> but also as a UDP broadcast to 192.168.1.255?
>
> Is there any way to do this without adding a physical
> NIC? Do I need to add a "virtual" NIC to do it? How?
>
> Thanks
>
>
> __________________________________
> Do you Yahoo!?
> Yahoo! Mail Address AutoComplete - You start. We finish.
> http://promotions.yahoo.com/new_mail
>
>
prev parent reply other threads:[~2004-07-14 12:18 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-07-14 5:02 forward udp broadcast packets on same subnet /interface with diff source Tom Thumb
2004-07-14 5:57 ` George Alexandru Dragoi
2004-07-14 9:03 ` Antony Stone
2004-07-14 9:01 ` Antony Stone
[not found] ` <3063e50407132231c03fefc@mail.gmail.com>
2004-07-14 12:18 ` George Alexandru Dragoi [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3063e5040714051837791ed4@mail.gmail.com \
--to=waruiinu@gmail.com \
--cc=netfilter@lists.netfilter.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox