From: Adam Majer <adamm@galacticasoftware.com>
To: netfilter@lists.netfilter.org
Subject: DNAT forwarding problems
Date: Wed, 04 Aug 2004 17:44:37 -0500 [thread overview]
Message-ID: <411166D5.30105@galacticasoftware.com> (raw)
Hi all,
I'm not subscribed to the list so please cc me any replies. Thank you.
I seem to have a major problem with DNAT. The setup is as follows,
external IP addresses: [A], [B]
internal IP address: [C] - not the NAT box
I want all udp port 53 traffic from [A]->[C] and from [B]->[C]. So I set
up the following rules
iptables -t nat -N dns-forward
iptables -t nat -A dns-forward -p udp --dport 53 -j DNAT --to-dest [C]
iptables -t nat -A PREROUTING -i A_interface -j dns-forward
iptables -t nat -A PREROUTING -i B_interface -j dns-forward
and in the packet table I set up forwarding as
itpables -P FORWARD DROP
iptables -A FORWARD -m conntrack --ctstate ESTABLISHED -j ACCEPT
iptables -N dns
iptables -A dns -d [C] -p udp --dport 53 -j ACCEPT
iptables -A FORWARD -j dns
When a packet comes over interface [A], (also the default route), it
hits the PREROUTING chain, gets forwarded to [C] and then goes though
FORWARD and gets to the DNS server.
When the packet comes over interface[B], it also gets to the PREROUTING
chain, but it never gets to the FORWARD chain and thus never even gets
to [C]. It just dissapears into thin air. My routing seems correct..
The routing is setup with the iproute2 tool. There are rule tables the
specify correct paths for packets from interface_A and interface_B to
all other interfaces and proper default routes (so that packets from B
go back though B). The only difference is that [A] is also the default
route in the default rule table. I can get from internal network D to C
as it does not go though DNAT.
Any ideas? Can someone reproduce this problem?
- Adam
PS. kernel 2.6.7, iptables 1.2.9
--
Building your applications one byte at a time
http://www.galacticasoftware.com
next reply other threads:[~2004-08-04 22:44 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-08-04 22:44 Adam Majer [this message]
2004-08-05 12:32 ` DNAT forwarding problems raido
2004-08-05 16:55 ` Adam Majer
2004-08-09 2:45 ` raido
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=411166D5.30105@galacticasoftware.com \
--to=adamm@galacticasoftware.com \
--cc=netfilter@lists.netfilter.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox