From mboxrd@z Thu Jan 1 00:00:00 1970 From: Matt Singerman Subject: Re: Problems configuring iptables Date: Wed, 23 Aug 2006 15:07:16 -0400 Message-ID: <44ECA764.8020205@ncemch.org> References: <002e01c6c6e6$731fa7f0$9e0110ac@chaussy> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <002e01c6c6e6$731fa7f0$9e0110ac@chaussy> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: netfilter-bounces@lists.netfilter.org Errors-To: netfilter-bounces@lists.netfilter.org Content-Type: text/plain; charset="us-ascii"; format="flowed" To: pablo@blueoakdb.com Cc: netfilter@lists.netfilter.org Pablo Sanchez wrote: > > > >> -----Original Message----- >> From: netfilter-bounces@lists.netfilter.org >> [mailto:netfilter-bounces@lists.netfilter.org] On Behalf Of >> Matt Singerman >> Sent: Wednesday, August 23, 2006 2:58 PM >> To: Martijn Lievaart >> Cc: netfilter@lists.netfilter.org >> Subject: Re: Problems configuring iptables >> >> it took an extremely long time for the connection to go >> through. Once it connected, it runs at normal speed, but it >> took a good 30 or 40 seconds for ssh to prompt me for my >> password. What could be causing this? I am guessing it is >> some sort of routing issue? >> > > Usually this means ssh isn't resolving properly. I'd guess your > /etc/resolv.conf file isn't setup properly. Ensure the nameserver values > point to your ISP. > > Cheers, > --- > Pablo Sanchez - Blueoak Database Engineering, Inc > Ph: 819.459.1926 Toll free: 888.459.1926 > Cell: 819.918.9731 Pgr: pablo_p@blueoakdb.com > Fax: 603.720.7723 (US) > > > Hi Pablo, resolv.conf appears to be set up correctly. Also, if I turn off the firewall and just let traffic flow through the bridge unfettered, connections are much snappier. Actually, if I flush the rules, it is just as fast with the firewall off. Any ideas what else it could be?