From: Vigneswaran R <vignesh@atc.tcs.com>
To: mart.frauenlob@chello.at
Cc: Fabio Pedretti <fabio.pedretti@unibs.it>, netfilter@vger.kernel.org
Subject: Re: About using -i with MASQUERADE
Date: Fri, 29 Jan 2016 17:04:42 +0530 [thread overview]
Message-ID: <56AB4E52.4030802@atc.tcs.com> (raw)
In-Reply-To: <56AB4C4A.7020709@chello.at>
On 01/29/2016 04:56 PM, Mart Frauenlob wrote:
> On 29.01.2016 11:10, Vigneswaran R wrote:
> [...]
>>
>> In the FORWARDING chain, you can mark the packets based on incoming
>> Interface. Then use the mark to MASQUERADE the packets at the
>> POSTROUTING chain. eg.,
>>
>> -t nat -A FORWARD -i eth3 -j MARK --set-mark 0xffff
>> -t nat -A POSTROUTING -m mark --mark 0xffff -j MASQUERADE
>>
>> (I hope this should work. However, I haven't tried this by myself.)
>>
>> Vignesh
>
>
> Hello,
>
> there is no FORWARD chain in the nat table. And marking in the nat
> table will only mark packets of conntrack state NEW.
> Better do the marking in the mangle or filter table.
Oops, I intended filter table only. (copy paste error).
-t filter -A FORWARD -i eth3 -j MARK --set-mark 0xffff
Vignesh
>
> Best regards,
>
> Mart
>
next prev parent reply other threads:[~2016-01-29 11:34 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-22 11:53 About using -i with MASQUERADE Fabio Pedretti
2016-01-22 14:07 ` Bastian Bittorf
2016-01-29 10:10 ` Vigneswaran R
2016-01-29 11:26 ` Mart Frauenlob
2016-01-29 11:34 ` Vigneswaran R [this message]
2016-01-29 21:25 ` Pascal Hambourg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56AB4E52.4030802@atc.tcs.com \
--to=vignesh@atc.tcs.com \
--cc=fabio.pedretti@unibs.it \
--cc=mart.frauenlob@chello.at \
--cc=netfilter@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox