From: Vlad Janicek <vladjanicek@gmail.com>
To: netfilter@lists.netfilter.org
Subject: Re: whats wrong???
Date: Tue, 28 Jun 2005 13:32:45 -0400 [thread overview]
Message-ID: <96bc76cf05062810322e6ffcbd@mail.gmail.com> (raw)
In-Reply-To: <42C17D6F.70709@adinet.com.uy>
which IP address are you using? could you paste the script you use and your
nic configurations??
2005/6/28, Juan Manuel Tato <madness@adinet.com.uy>:
>
> hi, i'm configuring a firewall, and i need some port forwarding
> to ip 192.168.100.1 <http://192.168.100.1> from my public ip.
> but isn't working....
> where come the output of the chains
>
> fw-new:~# iptables -L -n
> Chain INPUT (policy ACCEPT)
> target prot opt source destination
> ACCEPT all -- 0.0.0.0/0 <http://0.0.0.0/0> 0.0.0.0/0 <http://0.0.0.0/0>
> ACCEPT all -- 192.168.100.1 <http://192.168.100.1> 0.0.0.0/0<http://0.0.0.0/0>
> ACCEPT all -- 192.168.100.2 <http://192.168.100.2> 0.0.0.0/0<http://0.0.0.0/0>
> ACCEPT all -- 192.168.100.3 <http://192.168.100.3> 0.0.0.0/0<http://0.0.0.0/0>
> ACCEPT all -- 192.168.100.4 <http://192.168.100.4> 0.0.0.0/0<http://0.0.0.0/0>
> ACCEPT all -- 192.168.100.5 <http://192.168.100.5> 0.0.0.0/0<http://0.0.0.0/0>
> ACCEPT all -- 192.168.100.6 <http://192.168.100.6> 0.0.0.0/0<http://0.0.0.0/0>
> ACCEPT all -- 192.168.100.7 <http://192.168.100.7> 0.0.0.0/0<http://0.0.0.0/0>
> ACCEPT all -- 192.168.100.8 <http://192.168.100.8> 0.0.0.0/0<http://0.0.0.0/0>
> ACCEPT all -- 192.168.100.9 <http://192.168.100.9> 0.0.0.0/0<http://0.0.0.0/0>
>
> badflags tcp -- 0.0.0.0/0 <http://0.0.0.0/0> 0.0.0.0/0 <http://0.0.0.0/0>tcp
> flags:0x3F/0x29
> badflags tcp -- 0.0.0.0/0 <http://0.0.0.0/0> 0.0.0.0/0 <http://0.0.0.0/0>tcp
> flags:0x3F/0x3F
> badflags tcp -- 0.0.0.0/0 <http://0.0.0.0/0> 0.0.0.0/0 <http://0.0.0.0/0>tcp
> flags:0x3F/0x37
> badflags tcp -- 0.0.0.0/0 <http://0.0.0.0/0> 0.0.0.0/0 <http://0.0.0.0/0>tcp
> flags:0x3F/0x00
> badflags tcp -- 0.0.0.0/0 <http://0.0.0.0/0> 0.0.0.0/0 <http://0.0.0.0/0>tcp
> flags:0x06/0x06
> badflags tcp -- 0.0.0.0/0 <http://0.0.0.0/0> 0.0.0.0/0 <http://0.0.0.0/0>tcp
> flags:0x03/0x03
> ACCEPT icmp -- 0.0.0.0/0 <http://0.0.0.0/0> 0.0.0.0/0 <http://0.0.0.0/0>icmp type 0
> ACCEPT icmp -- 0.0.0.0/0 <http://0.0.0.0/0> 0.0.0.0/0 <http://0.0.0.0/0>icmp type 3
> ACCEPT icmp -- 0.0.0.0/0 <http://0.0.0.0/0> 0.0.0.0/0 <http://0.0.0.0/0>icmp type 11
> ACCEPT icmp -- 0.0.0.0/0 <http://0.0.0.0/0> 0.0.0.0/0 <http://0.0.0.0/0>icmp type 8
> limit: avg 1/sec burst 5
> firewall icmp -- 0.0.0.0/0 <http://0.0.0.0/0> 0.0.0.0/0 <http://0.0.0.0/0>
> ACCEPT tcp -- 192.168.100.0/24 <http://192.168.100.0/24> 0.0.0.0/0<http://0.0.0.0/0>tcp dpt:22
> ACCEPT tcp -- 0.0.0.0/0 <http://0.0.0.0/0> 0.0.0.0/0 <http://0.0.0.0/0>tcp dpt:80
> ACCEPT udp -- 0.0.0.0/0 <http://0.0.0.0/0> 0.0.0.0/0 <http://0.0.0.0/0>udp dpt:80
> ACCEPT tcp -- 0.0.0.0/0 <http://0.0.0.0/0> 0.0.0.0/0 <http://0.0.0.0/0>tcp dpt:25
> ACCEPT udp -- 0.0.0.0/0 <http://0.0.0.0/0> 0.0.0.0/0 <http://0.0.0.0/0>udp dpt:25
> ACCEPT tcp -- 0.0.0.0/0 <http://0.0.0.0/0> 0.0.0.0/0 <http://0.0.0.0/0>tcp dpt:110
> ACCEPT udp -- 0.0.0.0/0 <http://0.0.0.0/0> 0.0.0.0/0 <http://0.0.0.0/0>udp dpt:110
> ACCEPT tcp -- 0.0.0.0/0 <http://0.0.0.0/0> 0.0.0.0/0 <http://0.0.0.0/0>tcp dpt:143
> ACCEPT udp -- 0.0.0.0/0 <http://0.0.0.0/0> 0.0.0.0/0 <http://0.0.0.0/0>udp dpt:143
> ACCEPT tcp -- 0.0.0.0/0 <http://0.0.0.0/0> 0.0.0.0/0 <http://0.0.0.0/0>tcp dpt:53
> ACCEPT udp -- 0.0.0.0/0 <http://0.0.0.0/0> 0.0.0.0/0 <http://0.0.0.0/0>udp dpt:53
> ACCEPT all -- 0.0.0.0/0 <http://0.0.0.0/0> 0.0.0.0/0 <http://0.0.0.0/0>state
> RELATED,ESTABLISHED
> silent udp -- 0.0.0.0/0 <http://0.0.0.0/0> 0.0.0.0/0 <http://0.0.0.0/0>udp spt:137
> dpt:137
> dropwall all -- 0.0.0.0/0 <http://0.0.0.0/0> 0.0.0.0/0 <http://0.0.0.0/0>
>
> Chain FORWARD (policy ACCEPT)
> target prot opt source destination
> DROP all -- 0.0.0.0/0 <http://0.0.0.0/0> 0.0.0.0/0 <http://0.0.0.0/0>state
> INVALID,NEW
> ACCEPT tcp -- 0.0.0.0/0 <http://0.0.0.0/0> 192.168.100.1<http://192.168.100.1>tcp dpt:80
> ACCEPT udp -- 0.0.0.0/0 <http://0.0.0.0/0> 192.168.100.1<http://192.168.100.1>udp dpt:80
> ACCEPT tcp -- 0.0.0.0/0 <http://0.0.0.0/0> 192.168.100.1<http://192.168.100.1>tcp dpt:25
> ACCEPT udp -- 0.0.0.0/0 <http://0.0.0.0/0> 192.168.100.1<http://192.168.100.1>udp dpt:25
>
> Chain OUTPUT (policy ACCEPT)
> target prot opt source destination
>
> Chain badflags (6 references)
> target prot opt source destination
> LOG all -- 0.0.0.0/0 <http://0.0.0.0/0> 0.0.0.0/0 <http://0.0.0.0/0>limit: avg
> 15/min burst 5 LOG flags 0 level 4 prefix `Badflags:'
> DROP all -- 0.0.0.0/0 <http://0.0.0.0/0> 0.0.0.0/0 <http://0.0.0.0/0>
>
> Chain dropwall (1 references)
> target prot opt source destination
> LOG all -- 0.0.0.0/0 <http://0.0.0.0/0> 0.0.0.0/0 <http://0.0.0.0/0>limit: avg
> 15/min burst 5 LOG flags 0 level 4 prefix `Dropwall:'
> DROP all -- 0.0.0.0/0 <http://0.0.0.0/0> 0.0.0.0/0 <http://0.0.0.0/0>
>
> Chain firewall (1 references)
> target prot opt source destination
> LOG all -- 0.0.0.0/0 <http://0.0.0.0/0> 0.0.0.0/0 <http://0.0.0.0/0>limit: avg
> 15/min burst 5 LOG flags 0 level 4 prefix `Firewall:'
> DROP all -- 0.0.0.0/0 <http://0.0.0.0/0> 0.0.0.0/0 <http://0.0.0.0/0>
>
> Chain silent (1 references)
> target prot opt source destination
> DROP all -- 0.0.0.0/0 <http://0.0.0.0/0> 0.0.0.0/0 <http://0.0.0.0/0>
>
>
--
Vlad
next prev parent reply other threads:[~2005-06-28 17:32 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-06-28 16:40 whats wrong??? Juan Manuel Tato
2005-06-28 17:32 ` Vlad Janicek [this message]
2005-06-28 18:04 ` Juan Manuel Tato
2005-06-29 1:09 ` Vlad Janicek
2005-06-30 10:43 ` Jan Engelhardt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=96bc76cf05062810322e6ffcbd@mail.gmail.com \
--to=vladjanicek@gmail.com \
--cc=netfilter@lists.netfilter.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox