From: Mike Hendrie <mike@hendrienet.com>
To: Vigneswaran R <vignesh@atc.tcs.com>
Cc: netfilter@vger.kernel.org
Subject: Re: Proxy Filter iptable Settings
Date: Wed, 27 Apr 2011 11:46:41 -0500 [thread overview]
Message-ID: <BANLkTin_yWWZ_Tmo=T_dsc9xujLtf6h1xA@mail.gmail.com> (raw)
In-Reply-To: <BANLkTiky5xV9yhr-1nq7cLOSmV1nGt=cKg@mail.gmail.com>
Is there a trick to getting a secureNAT connection to work through the
proxy server with the following iptables setting? Do I have to make
another rule like the one below for each port that is required?
iptables -t nat -A PREROUTING -i eth1 -p tcp --dport 80 -j REDIRECT
--to-port 8080
Thank you
On Wed, Apr 27, 2011 at 7:45 AM, Mike Hendrie <mike@hendrienet.com> wrote:
> I tried:
> sudo iptables -t nat -A PREROUTING -i eth1 -p tcp --dport 80 -j
> REDIRECT --to- 8080
> iptables -t nat -A POSTROUTING -s 172.20.0.0/16 -j MASQUERADE
>
> And still ended up with the same message:
>
> ERROR
> The requested URL could not be retrieved
>
> --------------------------------------------------------------------------------
>
> The following error was encountered while trying to retrieve the URL:
> http://twinlakes.k12.wi.us/
>
> Connection to 216.56.4.133 failed.
>
> The system returned: (110) Connection timed out
>
> The remote host or network may be down. Please try the request again.
>
> Your cache administrator is webmaster.
>
>
>
>
> --------------------------------------------------------------------------------
>
> Generated Wed, 27 Apr 2011 12:46:38 GMT by localhost (squid/2.7.STABLE9)
>
>
>
>
> On Wed, Apr 27, 2011 at 7:17 AM, Vigneswaran R <vignesh@atc.tcs.com> wrote:
>> On 04/27/2011 04:56 PM, Mike Hendrie wrote:
>>>
>>> Thanks for the response. Once I implemented your suggestion, I get the
>>> following error when trying to access the school's website from WITHIN
>>> the LAN. Why can it not find the URL?
>>>
>>> ERROR
>>>
>>> The requested URL could not be retrieved
>>>
>>> The following error was encountered while trying to retrieve the URL:
>>> http://www.twinlakes.k12.wi.us/
>>>
>>> Connection to 216.56.4.133 failed.
>>> The system returned: (110) Connection timed out
>>
>> I assume that you want to give access to the Internet for all the machines
>> in the LAN, through your "PROXY" server. ie., making the server an Internet
>> Gateway.
>>
>> If so, the following should work,
>>
>> iptables -t nat -A POSTROUTING -s 192.168.1.0/24 -j MASQUERADE
>>
>> Here, replace the 192.168.1.0/24 with the correct IP address range used in
>> your LAN. Please ensure that all the machines have the default route
>> pointing to the server.
>>
>> This allows, all kinds of traffic like http, ftp, ssh etc., to the public
>> sites. If necessary, add further iptables rules to restrict this. Hope this
>> helps.
>>
>>
>> Regards,
>> Vignesh
>> --
>> To unsubscribe from this list: send the line "unsubscribe netfilter" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
>
prev parent reply other threads:[~2011-04-27 16:46 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-27 3:07 Proxy Filter iptable Settings Mike Hendrie
2011-04-27 6:16 ` Andrew Beverley
2011-04-27 11:26 ` Mike Hendrie
2011-04-27 12:17 ` Vigneswaran R
2011-04-27 12:45 ` Mike Hendrie
2011-04-27 13:18 ` Vigneswaran R
2011-04-27 13:41 ` Mike Hendrie
2011-04-27 17:24 ` Andrew Beverley
2011-04-28 6:36 ` Vigneswaran R
2011-04-28 21:43 ` Mike Hendrie
2011-04-29 9:16 ` Vigneswaran R
2011-04-30 8:02 ` Andrew Beverley
2011-04-30 16:50 ` /dev/rob0
2011-04-30 17:47 ` Mike Hendrie
2011-04-30 18:02 ` Andrew Beverley
2011-04-30 18:23 ` Mike Hendrie
2011-04-30 19:08 ` Andrew Beverley
2011-04-30 19:24 ` /dev/rob0
2011-05-03 17:23 ` Mike Hendrie
2011-04-30 18:04 ` Jan Engelhardt
2011-04-30 18:28 ` /dev/rob0
2011-04-27 16:46 ` Mike Hendrie [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='BANLkTin_yWWZ_Tmo=T_dsc9xujLtf6h1xA@mail.gmail.com' \
--to=mike@hendrienet.com \
--cc=netfilter@vger.kernel.org \
--cc=vignesh@atc.tcs.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).