From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Joel Linuxdude" Subject: Re: DCC receive works fine but not SEND Date: Tue, 26 Nov 2002 00:32:00 -0500 Sender: netfilter-admin@lists.netfilter.org Message-ID: Mime-Version: 1.0 Return-path: Errors-To: netfilter-admin@lists.netfilter.org List-Help: List-Post: List-Subscribe: , List-Id: List-Unsubscribe: , List-Archive: Content-Type: text/plain; format=flowed; charset="us-ascii" Content-Transfer-Encoding: 7bit To: nix@go-nix.ca, netfilter@lists.netfilter.org >On Mon, 2002-11-25 at 18:51, Joel Linuxdude wrote: > > I can not send files over IRC using DCC but I can receive > > them just fine. I played with the firewall script and didnt > > have any luck. Maybe its the ISP, but what can I do to ensure > > that it will work? > > > > eth0 = cable modem > > eth1 = LAN > > > > I make sure to do this; > > $IPT -t nat -A POSTROUTING -o eth0 -j SNAT --to-source x.x.x.x > > > > For ports that seem to not get forwarded right I do this; > > $IPT -t nat -A PREROUTING -i eth0 -p tcp --dport 6699 -j DNAT --to > > 192.168.0.9-192.168.0.20 (WinMX stuff) > > > > I can not find any specs to tell me what IRC DCC is all about! > > Is it TCP or UDP? What port? > >modprobe ip_nat_irc I have a monolithic kernel. Although I dont use modules, I have them all compiled right into the kernel. I did compile all of the Netfilter IRC modules. Now what? *whimper* *pout* _________________________________________________________________ MSN 8 with e-mail virus protection service: 2 months FREE* http://join.msn.com/?page=features/virus