[ 50.189] X.Org X Server 1.19.7 Release Date: 2019-03-02 [ 50.189] X Protocol Version 11, Revision 0 [ 50.189] Build Operating System: Linux 4.19.8-x64 i686 [ 50.189] Current Operating System: Linux slax 5.8.0-x64+ #18 SMP PREEMPT Sun Aug 9 19:39:10 MSK 2020 x86_64 [ 50.189] Kernel command line: BOOT_IMAGE=Lin-5.8.0-x64 ro root=802 nocd vt.default_utf8=0 scsi_mod.use_blk_mq=1 nouveau.debug=pci=debug log_buf_len=1M [ 50.189] Build Date: 30 March 2019 05:58:26PM [ 50.189] [ 50.189] Current version of pixman: 0.38.0 [ 50.189] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 50.189] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 50.190] (==) Log file: "/usr/X11R7/var/log/Xorg.0.log", Time: Thu Aug 13 18:54:54 2020 [ 50.239] (==) Using config file: "/etc/X11/xorg.conf" [ 50.239] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 50.240] (==) Using system config directory "/usr/X11R7/share/X11/xorg.conf.d" [ 50.254] (==) ServerLayout "X.org Configured" [ 50.254] (**) |-->Screen "Screen0" (0) [ 50.254] (**) | |-->Monitor "Monitor0" [ 50.254] (**) | |-->Device "Card0" [ 50.254] (**) |-->Input Device "Mouse0" [ 50.254] (**) |-->Input Device "Keyboard0" [ 50.254] (==) Automatically adding devices [ 50.254] (==) Automatically enabling devices [ 50.254] (==) Automatically adding GPU devices [ 50.254] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 50.342] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/truetype". [ 50.342] Entry deleted from font path. [ 50.342] (Run 'mkfontdir' on "/usr/share/fonts/truetype"). [ 50.353] (WW) The directory "/usr/X11R7/share/fonts/X11/misc/" does not exist. [ 50.353] Entry deleted from font path. [ 50.353] (WW) The directory "/usr/X11R7/share/fonts/X11/TTF/" does not exist. [ 50.353] Entry deleted from font path. [ 50.353] (WW) The directory "/usr/X11R7/share/fonts/X11/OTF/" does not exist. [ 50.353] Entry deleted from font path. [ 50.353] (WW) The directory "/usr/X11R7/share/fonts/X11/Type1/" does not exist. [ 50.353] Entry deleted from font path. [ 50.353] (WW) The directory "/usr/X11R7/share/fonts/X11/100dpi/" does not exist. [ 50.353] Entry deleted from font path. [ 50.353] (WW) The directory "/usr/X11R7/share/fonts/X11/75dpi/" does not exist. [ 50.353] Entry deleted from font path. [ 50.353] (**) FontPath set to: /usr/X11R7/lib/X11/fonts/cp1251/misc, /usr/X11R7/lib/X11/fonts/misc, /usr/X11R7/lib/X11/fonts/cp1251/75dpi, /usr/X11R7/lib/X11/fonts/75dpi, /usr/share/fonts/ttf/western, /usr/share/fonts/ttf/decoratives, /usr/share/fonts/TTF [ 50.353] (**) ModulePath set to "/usr/X11R7/lib/xorg/modules" [ 50.353] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled. [ 50.353] (WW) Disabling Mouse0 [ 50.353] (WW) Disabling Keyboard0 [ 50.353] (II) Loader magic: 0x829f680 [ 50.353] (II) Module ABI versions: [ 50.353] X.Org ANSI C Emulation: 0.4 [ 50.353] X.Org Video Driver: 23.0 [ 50.353] X.Org XInput driver : 24.1 [ 50.353] X.Org Server Extension : 10.0 [ 50.354] (--) using VT number 7 [ 50.354] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration [ 50.354] (II) xfree86: Adding drm device (/dev/dri/card0) [ 50.354] (II) xfree86: Adding drm device (/dev/dri/card1) [ 50.355] (--) PCI:*(0:1:0:0) 10de:0606:0000:0000 rev 162, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072 [ 50.356] (--) PCI: (0:2:0:0) 10de:0ca3:1043:8326 rev 162, Mem @ 0xfc000000/16777216, 0xb0000000/268435456, 0xc0000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288 [ 50.356] (II) Open ACPI successful (/var/run/acpid.socket) [ 50.356] (II) "glx" will be loaded. This was enabled by default and also specified in the config file. [ 50.356] (II) LoadModule: "ddc" [ 50.356] (II) Module "ddc" already built-in [ 50.356] (II) LoadModule: "vbe" [ 50.370] (II) Loading /usr/X11R7/lib/xorg/modules/libvbe.so [ 50.378] (II) Module vbe: vendor="X.Org Foundation" [ 50.378] compiled for 1.19.7, module version = 1.1.0 [ 50.378] ABI class: X.Org Video Driver, version 23.0 [ 50.378] (II) LoadModule: "dbe" [ 50.378] (II) Module "dbe" already built-in [ 50.378] (II) LoadModule: "dri" [ 50.378] (II) Module "dri" already built-in [ 50.378] (II) LoadModule: "extmod" [ 50.378] (II) Module "extmod" already built-in [ 50.378] (II) LoadModule: "glx" [ 50.378] (II) Loading /usr/X11R7/lib/xorg/modules/extensions/libglx.so [ 50.394] (II) Module glx: vendor="X.Org Foundation" [ 50.394] compiled for 1.19.7, module version = 1.0.0 [ 50.394] ABI class: X.Org Server Extension, version 10.0 [ 50.394] (II) LoadModule: "record" [ 50.394] (II) Module "record" already built-in [ 50.394] (II) LoadModule: "xtrap" [ 50.423] (WW) Warning, couldn't open module xtrap [ 50.423] (II) UnloadModule: "xtrap" [ 50.423] (II) Unloading xtrap [ 50.423] (EE) Failed to load module "xtrap" (module does not exist, 0) [ 50.423] (II) LoadModule: "extmod" [ 50.423] (II) Module "extmod" already built-in [ 50.423] (II) LoadModule: "nouveau" [ 50.423] (II) Loading /usr/X11R7/lib/xorg/modules/drivers/nouveau_drv.so [ 50.443] (II) Module nouveau: vendor="X.Org Foundation" [ 50.443] compiled for 1.19.7, module version = 1.0.16 [ 50.443] Module class: X.Org Video Driver [ 50.443] ABI class: X.Org Video Driver, version 23.0 [ 50.443] (II) NOUVEAU driver Date: Sat Oct 26 18:36:27 2019 -0400 [ 50.443] (II) NOUVEAU driver for NVIDIA chipset families : [ 50.443] RIVA TNT (NV04) [ 50.443] RIVA TNT2 (NV05) [ 50.443] GeForce 256 (NV10) [ 50.443] GeForce 2 (NV11, NV15) [ 50.444] GeForce 4MX (NV17, NV18) [ 50.444] GeForce 3 (NV20) [ 50.444] GeForce 4Ti (NV25, NV28) [ 50.444] GeForce FX (NV3x) [ 50.444] GeForce 6 (NV4x) [ 50.444] GeForce 7 (G7x) [ 50.444] GeForce 8 (G8x) [ 50.444] GeForce 9 (G9x) [ 50.444] GeForce GTX 2xx/3xx (GT2xx) [ 50.444] GeForce GTX 4xx/5xx (GFxxx) [ 50.444] GeForce GTX 6xx/7xx (GKxxx) [ 50.444] GeForce GTX 9xx (GMxxx) [ 50.444] GeForce GTX 10xx (GPxxx) [ 50.446] (II) [drm] nouveau interface version: 1.3.1 [ 50.446] (II) [drm] nouveau interface version: 1.3.1 [ 50.446] (II) Loading sub module "dri2" [ 50.446] (II) LoadModule: "dri2" [ 50.446] (II) Module "dri2" already built-in [ 50.446] (--) NOUVEAU(0): Chipset: "NVIDIA NV92" [ 50.446] (**) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32 [ 50.447] (==) NOUVEAU(0): RGB weight 888 [ 50.447] (==) NOUVEAU(0): Default visual is TrueColor [ 50.447] (**) NOUVEAU(0): Option "PageFlip" "1" [ 50.447] (**) NOUVEAU(0): Option "DRI" "3" [ 50.447] (==) NOUVEAU(0): Using HW cursor [ 50.447] (**) NOUVEAU(0): Allowed maximum DRI level 3. [ 50.447] (==) NOUVEAU(0): GLX sync to VBlank enabled. [ 50.447] (**) NOUVEAU(0): Page flipping enabled [ 50.447] (==) NOUVEAU(0): Swap limit set to 1 [Max allowed 2] [ 50.447] (==) NOUVEAU(0): Page flipping synced to vblank by kernel. [ 50.447] (II) NOUVEAU(0): Initializing outputs ... [ 50.476] (II) NOUVEAU(0): Output DVI-I-1 using monitor section Monitor0 [ 50.477] (II) NOUVEAU(0): Output DVI-I-2 has no monitor section [ 50.477] (II) NOUVEAU(0): 2 crtcs needed for screen. [ 50.478] (II) NOUVEAU(0): Allocated crtc nr. 0 to this screen. [ 50.478] (II) NOUVEAU(0): Allocated crtc nr. 1 to this screen. [ 50.507] (II) NOUVEAU(0): EDID for output DVI-I-1 [ 50.507] (II) NOUVEAU(0): Manufacturer: GSM Model: 5b01 Serial#: 5886 [ 50.507] (II) NOUVEAU(0): Year: 2017 Week: 5 [ 50.507] (II) NOUVEAU(0): EDID Version: 1.3 [ 50.507] (II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V [ 50.507] (II) NOUVEAU(0): Sync: Separate Composite [ 50.507] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 42 vert.: 26 [ 50.507] (II) NOUVEAU(0): Gamma: 2.20 [ 50.507] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display [ 50.507] (II) NOUVEAU(0): First detailed timing is preferred mode [ 50.507] (II) NOUVEAU(0): redX: 0.631 redY: 0.349 greenX: 0.341 greenY: 0.622 [ 50.507] (II) NOUVEAU(0): blueX: 0.152 blueY: 0.058 whiteX: 0.313 whiteY: 0.329 [ 50.507] (II) NOUVEAU(0): Supported established timings: [ 50.507] (II) NOUVEAU(0): 720x400@70Hz [ 50.507] (II) NOUVEAU(0): 640x480@60Hz [ 50.507] (II) NOUVEAU(0): 640x480@75Hz [ 50.507] (II) NOUVEAU(0): 800x600@56Hz [ 50.507] (II) NOUVEAU(0): 800x600@60Hz [ 50.507] (II) NOUVEAU(0): 800x600@75Hz [ 50.507] (II) NOUVEAU(0): 832x624@75Hz [ 50.507] (II) NOUVEAU(0): 1024x768@60Hz [ 50.507] (II) NOUVEAU(0): 1024x768@75Hz [ 50.507] (II) NOUVEAU(0): 1152x864@75Hz [ 50.507] (II) NOUVEAU(0): Manufacturer's mask: 0 [ 50.507] (II) NOUVEAU(0): Supported standard timings: [ 50.507] (II) NOUVEAU(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337 [ 50.507] (II) NOUVEAU(0): #1: hsize: 1280 vsize 720 refresh: 60 vid: 49281 [ 50.507] (II) NOUVEAU(0): #2: hsize: 1280 vsize 800 refresh: 60 vid: 129 [ 50.507] (II) NOUVEAU(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 50.507] (II) NOUVEAU(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149 [ 50.507] (II) NOUVEAU(0): Supported detailed timing: [ 50.507] (II) NOUVEAU(0): clock: 88.8 MHz Image Size: 419 x 262 mm [ 50.507] (II) NOUVEAU(0): h_active: 1440 h_sync: 1488 h_sync_end 1520 h_blank_end 1600 h_border: 0 [ 50.507] (II) NOUVEAU(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 926 v_border: 0 [ 50.507] (II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 135 MHz [ 50.507] (II) NOUVEAU(0): Monitor name: LG IPS WSXGA [ 50.507] (II) NOUVEAU(0): Serial No: 705NTUW05886 [ 50.507] (II) NOUVEAU(0): EDID (in hex): [ 50.507] (II) NOUVEAU(0): 00ffffffffffff001e6d015bfe160000 [ 50.507] (II) NOUVEAU(0): 051b01036c2a1a78ea9535a159579f27 [ 50.507] (II) NOUVEAU(0): 0e5054a76a80714f81c0810081809500 [ 50.508] (II) NOUVEAU(0): 010101010101ab22a0a050841a303020 [ 50.508] (II) NOUVEAU(0): 3600a3061100001a000000fd00384b1e [ 50.508] (II) NOUVEAU(0): 530d000a202020202020000000fc004c [ 50.508] (II) NOUVEAU(0): 47204950532057535847410a000000ff [ 50.508] (II) NOUVEAU(0): 003730354e54555730353838360a00f9 [ 50.508] (II) NOUVEAU(0): Not using mode "1152x864" (hsync out of range) [ 50.508] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1 [ 50.508] (II) NOUVEAU(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz eP) [ 50.508] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 50.508] (II) NOUVEAU(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e) [ 50.508] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 50.508] (II) NOUVEAU(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 50.508] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 50.508] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 50.508] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 50.508] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 50.508] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 50.508] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 50.508] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 50.508] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 50.509] (II) NOUVEAU(0): EDID for output DVI-I-2 [ 50.509] (II) NOUVEAU(0): Output DVI-I-1 connected [ 50.509] (II) NOUVEAU(0): Output DVI-I-2 disconnected [ 50.509] (II) NOUVEAU(0): Using exact sizes for initial modes [ 50.509] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1440x900 +0+0 [ 50.509] (==) NOUVEAU(0): Using gamma correction (1.0, 1.0, 1.0) [ 50.509] (--) NOUVEAU(0): Virtual size is 1440x900 (pitch 0) [ 50.509] (**) NOUVEAU(0): Driver mode "1440x900": 88.8 MHz (scaled from 0.0 MHz), 55.5 kHz, 59.9 Hz [ 50.509] (II) NOUVEAU(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz eP) [ 50.509] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz [ 50.509] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 50.509] (**) NOUVEAU(0): Driver mode "1280x800": 83.5 MHz (scaled from 0.0 MHz), 49.7 kHz, 59.8 Hz [ 50.509] (II) NOUVEAU(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e) [ 50.509] (**) NOUVEAU(0): Driver mode "1280x720": 74.2 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz [ 50.509] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e) [ 50.509] (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz [ 50.509] (II) NOUVEAU(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 50.509] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz [ 50.509] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 50.509] (**) NOUVEAU(0): Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz [ 50.509] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 50.509] (**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz [ 50.509] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 50.509] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz [ 50.509] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 50.509] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz [ 50.509] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 50.509] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz [ 50.509] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 50.509] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz [ 50.509] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 50.509] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz [ 50.509] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 50.509] (==) NOUVEAU(0): DPI set to (96, 96) [ 50.509] (II) Loading sub module "fb" [ 50.509] (II) LoadModule: "fb" [ 50.509] (II) Loading /usr/X11R7/lib/xorg/modules/libfb.so [ 50.514] (II) Module fb: vendor="X.Org Foundation" [ 50.514] compiled for 1.19.7, module version = 1.0.0 [ 50.514] ABI class: X.Org ANSI C Emulation, version 0.4 [ 50.514] (II) Loading sub module "shadowfb" [ 50.514] (II) LoadModule: "shadowfb" [ 50.514] (II) Loading /usr/X11R7/lib/xorg/modules/libshadowfb.so [ 50.515] (II) Module shadowfb: vendor="X.Org Foundation" [ 50.515] compiled for 1.19.7, module version = 1.0.0 [ 50.515] ABI class: X.Org ANSI C Emulation, version 0.4 [ 50.515] (II) Loading sub module "dri2" [ 50.515] (II) LoadModule: "dri2" [ 50.515] (II) Module "dri2" already built-in [ 50.515] (--) NOUVEAU(G0): Chipset: "NVIDIA NVA3" [ 50.515] (**) NOUVEAU(G0): Depth 24, (--) framebuffer bpp 32 [ 50.515] (==) NOUVEAU(G0): RGB weight 888 [ 50.515] (==) NOUVEAU(G0): Default visual is TrueColor [ 50.515] (**) NOUVEAU(G0): Option "PageFlip" "1" [ 50.515] (**) NOUVEAU(G0): Option "DRI" "3" [ 50.515] (==) NOUVEAU(G0): Using HW cursor [ 50.515] (**) NOUVEAU(G0): Allowed maximum DRI level 3. [ 50.515] (==) NOUVEAU(G0): GLX sync to VBlank enabled. [ 50.515] (**) NOUVEAU(G0): Page flipping enabled [ 50.515] (==) NOUVEAU(G0): Swap limit set to 1 [Max allowed 2] [ 50.515] (==) NOUVEAU(G0): Page flipping synced to vblank by kernel. [ 50.515] (II) NOUVEAU(G0): Initializing outputs ... [ 50.526] (II) NOUVEAU(G0): Output DVI-I-1-3 using monitor section Monitor0 [ 50.537] (II) NOUVEAU(G0): Output VGA-1-1 has no monitor section [ 50.538] (II) NOUVEAU(G0): Output HDMI-1-1 has no monitor section [ 50.538] (II) NOUVEAU(G0): 3 crtcs needed for screen. [ 50.539] (II) NOUVEAU(G0): Allocated crtc nr. 0 to this screen. [ 50.539] (II) NOUVEAU(G0): Allocated crtc nr. 1 to this screen. [ 50.550] (II) NOUVEAU(G0): EDID for output DVI-I-1-3 [ 50.561] (II) NOUVEAU(G0): EDID for output VGA-1-1 [ 50.562] (II) NOUVEAU(G0): EDID for output HDMI-1-1 [ 50.562] (==) NOUVEAU(G0): Using gamma correction (1.0, 1.0, 1.0) [ 50.562] (--) NOUVEAU(G0): Virtual size is 1024x768 (pitch 0) [ 50.562] (**) NOUVEAU(G0): Mode "1440x900": 106.5 MHz (scaled from 0.0 MHz), 55.9 kHz, 59.9 Hz [ 50.562] (II) NOUVEAU(G0): Modeline "1440x900"x59.9 106.50 1440 1528 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz) [ 50.562] (==) NOUVEAU(G0): DPI set to (96, 96) [ 50.562] (II) Loading sub module "fb" [ 50.562] (II) LoadModule: "fb" [ 50.562] (II) Loading /usr/X11R7/lib/xorg/modules/libfb.so [ 50.562] (II) Module fb: vendor="X.Org Foundation" [ 50.562] compiled for 1.19.7, module version = 1.0.0 [ 50.562] ABI class: X.Org ANSI C Emulation, version 0.4 [ 50.562] (II) Loading sub module "shadowfb" [ 50.562] (II) LoadModule: "shadowfb" [ 50.562] (II) Loading /usr/X11R7/lib/xorg/modules/libshadowfb.so [ 50.562] (II) Module shadowfb: vendor="X.Org Foundation" [ 50.562] compiled for 1.19.7, module version = 1.0.0 [ 50.562] ABI class: X.Org ANSI C Emulation, version 0.4 [ 50.562] (--) Depth 24 pixmap format is 32 bpp [ 50.563] (II) NOUVEAU(G0): Channel setup complete. [ 50.564] (II) NOUVEAU(G0): [COPY] async initialised. [ 50.564] (II) NOUVEAU(G0): Hardware support for Present enabled [ 50.564] (II) NOUVEAU(G0): [DRI2] Setup complete [ 50.564] (II) NOUVEAU(G0): [DRI2] DRI driver: nouveau [ 50.564] (II) NOUVEAU(G0): [DRI2] VDPAU driver: nouveau [ 50.564] (II) NOUVEAU(G0): DRI3 on EXA enabled [ 50.564] (II) Loading sub module "exa" [ 50.564] (II) LoadModule: "exa" [ 50.564] (II) Loading /usr/X11R7/lib/xorg/modules/libexa.so [ 50.566] (II) Module exa: vendor="X.Org Foundation" [ 50.566] compiled for 1.19.7, module version = 2.6.0 [ 50.566] ABI class: X.Org Video Driver, version 23.0 [ 50.566] (II) EXA(256): Driver allocated offscreen pixmaps [ 50.566] (II) EXA(256): Driver registered support for the following operations: [ 50.566] (II) Solid [ 50.566] (II) Copy [ 50.566] (II) Composite (RENDER acceleration) [ 50.566] (II) UploadToScreen [ 50.566] (II) DownloadFromScreen [ 50.566] (==) NOUVEAU(G0): Backing store enabled [ 50.566] (==) NOUVEAU(G0): Silken mouse enabled [ 50.566] (II) NOUVEAU(G0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video. [ 50.566] (II) NOUVEAU(G0): [XvMC] Extension initialized. [ 50.566] (==) NOUVEAU(G0): DPMS enabled [ 50.566] (II) NOUVEAU(G0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 50.569] (II) NOUVEAU(0): Channel setup complete. [ 50.569] (II) NOUVEAU(0): Hardware support for Present enabled [ 50.569] (II) NOUVEAU(0): [DRI2] Setup complete [ 50.569] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau [ 50.569] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau [ 50.569] (II) NOUVEAU(0): DRI3 on EXA enabled [ 50.569] (II) Loading sub module "exa" [ 50.569] (II) LoadModule: "exa" [ 50.569] (II) Loading /usr/X11R7/lib/xorg/modules/libexa.so [ 50.569] (II) Module exa: vendor="X.Org Foundation" [ 50.569] compiled for 1.19.7, module version = 2.6.0 [ 50.569] ABI class: X.Org Video Driver, version 23.0 [ 50.569] (II) EXA(0): Driver allocated offscreen pixmaps [ 50.569] (II) EXA(0): Driver registered support for the following operations: [ 50.569] (II) Solid [ 50.569] (II) Copy [ 50.569] (II) Composite (RENDER acceleration) [ 50.569] (II) UploadToScreen [ 50.569] (II) DownloadFromScreen [ 50.569] (==) NOUVEAU(0): Backing store enabled [ 50.569] (==) NOUVEAU(0): Silken mouse enabled [ 50.569] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video. [ 50.569] (II) NOUVEAU(0): [XvMC] Extension initialized. [ 50.569] (==) NOUVEAU(0): DPMS enabled [ 50.569] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 50.569] (--) RandR disabled [ 51.063] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 51.063] (II) AIGLX: enabled GLX_ARB_create_context [ 51.063] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 51.063] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile [ 51.063] (II) AIGLX: enabled GLX_INTEL_swap_event [ 51.063] (II) AIGLX: enabled GLX_SGI_swap_control [ 51.063] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB [ 51.063] (II) AIGLX: enabled GLX_ARB_fbconfig_float [ 51.063] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float [ 51.063] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 51.064] (II) AIGLX: Loaded and initialized nouveau [ 51.064] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 51.065] (II) NOUVEAU(G0): NVEnterVT is called. [ 51.067] (II) NOUVEAU(0): NVEnterVT is called. [ 51.094] (II) NOUVEAU(0): Setting screen physical size to 380 x 238 [ 51.094] resize called 1440 900 [ 51.335] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 51.335] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 51.335] (II) LoadModule: "evdev" [ 51.335] (II) Loading /usr/X11R7/lib/xorg/modules/input/evdev_drv.so [ 51.345] (II) Module evdev: vendor="X.Org Foundation" [ 51.345] compiled for 1.19.5, module version = 2.10.5 [ 51.345] Module class: X.Org XInput Driver [ 51.345] ABI class: X.Org XInput driver, version 24.1 [ 51.345] (II) Using input driver 'evdev' for 'Power Button' [ 51.345] (**) Power Button: always reports core events [ 51.345] (**) evdev: Power Button: Device: "/dev/input/event1" [ 51.345] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 51.345] (--) evdev: Power Button: Found keys [ 51.345] (II) evdev: Power Button: Configuring as keyboard [ 51.345] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1" [ 51.345] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 51.345] (**) Option "xkb_rules" "evdev" [ 51.345] (II) config/udev: Adding input device Power Button (/dev/input/event0) [ 51.345] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 51.345] (II) Using input driver 'evdev' for 'Power Button' [ 51.345] (**) Power Button: always reports core events [ 51.345] (**) evdev: Power Button: Device: "/dev/input/event0" [ 51.345] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 51.345] (--) evdev: Power Button: Found keys [ 51.345] (II) evdev: Power Button: Configuring as keyboard [ 51.345] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0" [ 51.345] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7) [ 51.345] (**) Option "xkb_rules" "evdev" [ 51.346] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event2) [ 51.346] (II) No input driver specified, ignoring this device. [ 51.346] (II) This device may have been added with another device file. [ 51.346] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event3) [ 51.346] (II) No input driver specified, ignoring this device. [ 51.346] (II) This device may have been added with another device file. [ 51.346] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event4) [ 51.346] (II) No input driver specified, ignoring this device. [ 51.346] (II) This device may have been added with another device file. [ 51.347] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event5) [ 51.347] (II) No input driver specified, ignoring this device. [ 51.347] (II) This device may have been added with another device file. [ 51.347] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event14) [ 51.347] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 51.347] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse' [ 51.347] (**) Logitech USB Optical Mouse: always reports core events [ 51.347] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event14" [ 51.347] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc077 [ 51.347] (--) evdev: Logitech USB Optical Mouse: Found 3 mouse buttons [ 51.347] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s) [ 51.347] (--) evdev: Logitech USB Optical Mouse: Found relative axes [ 51.347] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes [ 51.347] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse [ 51.347] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support [ 51.347] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 51.347] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 51.347] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb5/5-2/5-2:1.0/0003:046D:C077.0001/input/input14/event14" [ 51.347] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 8) [ 51.347] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes. [ 51.347] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 51.347] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0 [ 51.347] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000 [ 51.347] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4 [ 51.348] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0) [ 51.348] (II) No input driver specified, ignoring this device. [ 51.348] (II) This device may have been added with another device file. [ 51.348] (II) config/udev: Adding input device HID 04f3:0103 (/dev/input/event15) [ 51.348] (**) HID 04f3:0103: Applying InputClass "evdev keyboard catchall" [ 51.348] (II) Using input driver 'evdev' for 'HID 04f3:0103' [ 51.348] (**) HID 04f3:0103: always reports core events [ 51.348] (**) evdev: HID 04f3:0103: Device: "/dev/input/event15" [ 51.348] (--) evdev: HID 04f3:0103: Vendor 0x4f3 Product 0x103 [ 51.348] (--) evdev: HID 04f3:0103: Found keys [ 51.348] (II) evdev: HID 04f3:0103: Configuring as keyboard [ 51.348] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb5/5-3/5-3:1.0/0003:04F3:0103.0002/input/input15/event15" [ 51.348] (II) XINPUT: Adding extended input device "HID 04f3:0103" (type: KEYBOARD, id 9) [ 51.348] (**) Option "xkb_rules" "evdev" [ 51.348] (II) config/udev: Adding input device HID 04f3:0103 Consumer Control (/dev/input/event16) [ 51.348] (**) HID 04f3:0103 Consumer Control: Applying InputClass "evdev keyboard catchall" [ 51.349] (II) Using input driver 'evdev' for 'HID 04f3:0103 Consumer Control' [ 51.349] (**) HID 04f3:0103 Consumer Control: always reports core events [ 51.349] (**) evdev: HID 04f3:0103 Consumer Control: Device: "/dev/input/event16" [ 51.349] (--) evdev: HID 04f3:0103 Consumer Control: Vendor 0x4f3 Product 0x103 [ 51.349] (--) evdev: HID 04f3:0103 Consumer Control: Found 1 mouse buttons [ 51.349] (--) evdev: HID 04f3:0103 Consumer Control: Found scroll wheel(s) [ 51.349] (--) evdev: HID 04f3:0103 Consumer Control: Found relative axes [ 51.349] (II) evdev: HID 04f3:0103 Consumer Control: Forcing relative x/y axes to exist. [ 51.349] (--) evdev: HID 04f3:0103 Consumer Control: Found absolute axes [ 51.349] (II) evdev: HID 04f3:0103 Consumer Control: Forcing absolute x/y axes to exist. [ 51.349] (--) evdev: HID 04f3:0103 Consumer Control: Found keys [ 51.349] (II) evdev: HID 04f3:0103 Consumer Control: Configuring as mouse [ 51.349] (II) evdev: HID 04f3:0103 Consumer Control: Configuring as keyboard [ 51.349] (II) evdev: HID 04f3:0103 Consumer Control: Adding scrollwheel support [ 51.349] (**) evdev: HID 04f3:0103 Consumer Control: YAxisMapping: buttons 4 and 5 [ 51.349] (**) evdev: HID 04f3:0103 Consumer Control: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 51.349] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb5/5-3/5-3:1.1/0003:04F3:0103.0003/input/input16/event16" [ 51.349] (II) XINPUT: Adding extended input device "HID 04f3:0103 Consumer Control" (type: KEYBOARD, id 10) [ 51.349] (**) Option "xkb_rules" "evdev" [ 51.349] (II) evdev: HID 04f3:0103 Consumer Control: initialized for relative axes. [ 51.349] (WW) evdev: HID 04f3:0103 Consumer Control: ignoring absolute axes. [ 51.349] (**) HID 04f3:0103 Consumer Control: (accel) keeping acceleration scheme 1 [ 51.349] (**) HID 04f3:0103 Consumer Control: (accel) acceleration profile 0 [ 51.349] (**) HID 04f3:0103 Consumer Control: (accel) acceleration factor: 2.000 [ 51.349] (**) HID 04f3:0103 Consumer Control: (accel) acceleration threshold: 4 [ 51.349] (II) config/udev: Adding input device HID 04f3:0103 System Control (/dev/input/event17) [ 51.349] (**) HID 04f3:0103 System Control: Applying InputClass "evdev keyboard catchall" [ 51.349] (II) Using input driver 'evdev' for 'HID 04f3:0103 System Control' [ 51.349] (**) HID 04f3:0103 System Control: always reports core events [ 51.349] (**) evdev: HID 04f3:0103 System Control: Device: "/dev/input/event17" [ 51.349] (--) evdev: HID 04f3:0103 System Control: Vendor 0x4f3 Product 0x103 [ 51.349] (--) evdev: HID 04f3:0103 System Control: Found keys [ 51.349] (II) evdev: HID 04f3:0103 System Control: Configuring as keyboard [ 51.349] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb5/5-3/5-3:1.1/0003:04F3:0103.0003/input/input17/event17" [ 51.349] (II) XINPUT: Adding extended input device "HID 04f3:0103 System Control" (type: KEYBOARD, id 11) [ 51.349] (**) Option "xkb_rules" "evdev" [ 51.350] (II) config/udev: Adding input device HDA ATI SB Line Out Surround (/dev/input/event10) [ 51.350] (II) No input driver specified, ignoring this device. [ 51.350] (II) This device may have been added with another device file. [ 51.350] (II) config/udev: Adding input device HDA ATI SB Line Out CLFE (/dev/input/event11) [ 51.350] (II) No input driver specified, ignoring this device. [ 51.350] (II) This device may have been added with another device file. [ 51.350] (II) config/udev: Adding input device HDA ATI SB Line Out Side (/dev/input/event12) [ 51.350] (II) No input driver specified, ignoring this device. [ 51.350] (II) This device may have been added with another device file. [ 51.350] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event13) [ 51.350] (II) No input driver specified, ignoring this device. [ 51.351] (II) This device may have been added with another device file. [ 51.351] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event6) [ 51.351] (II) No input driver specified, ignoring this device. [ 51.351] (II) This device may have been added with another device file. [ 51.351] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event7) [ 51.351] (II) No input driver specified, ignoring this device. [ 51.351] (II) This device may have been added with another device file. [ 51.351] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event8) [ 51.351] (II) No input driver specified, ignoring this device. [ 51.351] (II) This device may have been added with another device file. [ 51.351] (II) config/udev: Adding input device HDA ATI SB Line Out Front (/dev/input/event9) [ 51.351] (II) No input driver specified, ignoring this device. [ 51.351] (II) This device may have been added with another device file. [ 181.103] failure to allocate surface 29x16@8 (pitch 64): -2 [ 396.226] failure to allocate surface 6x8@8 (pitch 64): -2