[PATCH v4 5/6] gpu: nova-core: set RMSetSriovMode for vGPU

[Zhi Wang <zhiw@nvidia.com>]

The GSP registry setup needs to advertise SR-IOV mode when nova-core boots
GSP for an enabled vGPU configuration. Without the registry entry, GSP-RM
is not told to initialize in the mode required by NVIDIA vGPU.

Append RMSetSriovMode to the SetRegistry command when the vGPU state
detected before GSP boot is enabled. Keep the existing registry entries
unchanged for non-vGPU boots.

Cc: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Zhi Wang <zhiw@nvidia.com>
---
 drivers/gpu/nova-core/gsp/boot.rs     |  2 +-
 drivers/gpu/nova-core/gsp/commands.rs | 14 +++++++++++++-
 2 files changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/nova-core/gsp/boot.rs b/drivers/gpu/nova-core/gsp/boot.rs
index 6b7d00205000..a2e8342e7760 100644
--- a/drivers/gpu/nova-core/gsp/boot.rs
+++ b/drivers/gpu/nova-core/gsp/boot.rs
@@ -89,7 +89,7 @@ pub(crate) fn boot(
         self.cmdq
             .send_command_no_wait(bar, commands::SetSystemInfo::new(pdev, chipset))?;
         self.cmdq
-            .send_command_no_wait(bar, commands::SetRegistry::new()?)?;
+            .send_command_no_wait(bar, commands::SetRegistry::new(ctx.vgpu.state())?)?;
 
         hal.post_boot(&self, ctx, &gsp_fw)?;
 
diff --git a/drivers/gpu/nova-core/gsp/commands.rs b/drivers/gpu/nova-core/gsp/commands.rs
index 08380de39048..134f34b19174 100644
--- a/drivers/gpu/nova-core/gsp/commands.rs
+++ b/drivers/gpu/nova-core/gsp/commands.rs
@@ -34,6 +34,7 @@
         },
     },
     sbuffer::SBufferIter,
+    vgpu::VgpuState, //
 };
 
 /// The `GspSetSystemInfo` command.
@@ -72,7 +73,7 @@ pub(crate) struct SetRegistry {
 
 impl SetRegistry {
     /// Creates a new `SetRegistry` command, using a set of hardcoded entries.
-    pub(crate) fn new() -> Result<Self> {
+    pub(crate) fn new(vgpu_state: VgpuState) -> Result<Self> {
         let mut entries = KVec::new();
 
         // RMSecBusResetEnable - enables PCI secondary bus reset
@@ -104,6 +105,17 @@ pub(crate) fn new() -> Result<Self> {
             GFP_KERNEL,
         )?;
 
+        if matches!(vgpu_state, VgpuState::Enabled { .. }) {
+            // RMSetSriovMode - required when vGPU is enabled.
+            entries.push(
+                RegistryEntry {
+                    key: "RMSetSriovMode",
+                    value: 1,
+                },
+                GFP_KERNEL,
+            )?;
+        }
+
         Ok(Self { entries })
     }
 }
-- 
2.51.0