From: "Alexandre Courbot" <acourbot@nvidia.com>
To: "Dave Airlie via B4 Relay" <devnull+airlied.redhat.com@kernel.org>
Cc: <airlied@redhat.com>, "Andreas Hindborg" <a.hindborg@kernel.org>,
"FUJITA Tomonori" <fujita.tomonori@gmail.com>,
"Gary Guo" <gary@garyguo.net>,
"Alice Ryhl" <aliceryhl@google.com>,
"Danilo Krummrich" <dakr@kernel.org>,
"Daniel Almeida" <daniel.almeida@collabora.com>,
<nova-gpu@lists.linux.dev>, <dri-devel@lists.freedesktop.org>
Subject: Re: [PATCH v6 2/2] gpu: nova-core: add support for GPU timer block. (v6)
Date: Tue, 10 Nov 2026 22:56:20 +0900 [thread overview]
Message-ID: <DMRKZS5DW48A.20UQK8GL5PRBG@nvidia.com> (raw)
In-Reply-To: <20261109-nova-timer-v6-2-5544a3bd8b28@redhat.com>
On Mon Nov 9, 2026 at 10:55 AM JST, Dave Airlie via B4 Relay wrote:
<...>
> diff --git a/drivers/gpu/nova-core/timer/hal/gh100.rs b/drivers/gpu/nova-core/timer/hal/gh100.rs
> new file mode 100644
> index 000000000000..154c7a301a0c
> --- /dev/null
> +++ b/drivers/gpu/nova-core/timer/hal/gh100.rs
> @@ -0,0 +1,63 @@
> +// SPDX-License-Identifier: GPL-2.0
> +
> +use super::TimerHal;
> +
> +use kernel::{
> + io::Io,
> + prelude::*,
> + time::*, //
> +};
> +
> +use crate::{
> + driver::Bar0,
> + fsp::Fsp,
> + timer::regs::gh100::*, //
> +};
> +
> +/// Timer HAL for Hopper and Blackwell.
> +struct Gh100;
> +
> +fn sec_timer_read(bar: Bar0<'_>) -> u64 {
> + let mut hi2 = bar.read(NV_PGC6_SCI_SEC_TIMER_TIME_1);
> + loop {
> + let lo = bar.read(NV_PGC6_SCI_SEC_TIMER_TIME_0);
> + let hi = bar.read(NV_PGC6_SCI_SEC_TIMER_TIME_1);
> + if hi == hi2 {
> + return u64::from(u32::from(hi)) << 32 | u64::from(u32::from(lo));
> + }
> + hi2 = bar.read(NV_PGC6_SCI_SEC_TIMER_TIME_1);
> + }
> +}
> +
> +fn set_sys_timer_offset(bar: Bar0<'_>, fsp: &Fsp<'_>, time_ns: u64) -> Result<u64> {
This method cannot fail, so it should return just `u64`.
> + let sec_timer_ns = sec_timer_read(bar);
> +
> + let sys_timer_offset_ns = time_ns.wrapping_sub(sec_timer_ns);
As discussed in my other response, wrapping here is defensible, but I'd
like to have a comment explaining why this is so, i.e. that even if we
wrap after an underflow the SEC_TIMER + OFFSET value module 61 bits will
match the system clock.
> +
> + // Don't set the timer offset registers on buggy firmware
> + if !fsp.is_bug_3957833_affected(bar) {
> + bar.write_reg(NV_PGC6_SCI_SYS_TIMER_OFFSET_1::from_nsec(
> + sys_timer_offset_ns,
> + ));
> + bar.write_reg(
> + NV_PGC6_SCI_SYS_TIMER_OFFSET_0::from_nsec(sys_timer_offset_ns).with_update(true),
> + );
> + }
> + Ok(sys_timer_offset_ns)
> +}
> +
> +impl TimerHal for Gh100 {
> + fn setup(&self, bar: Bar0<'_>, fsp: Option<&Fsp<'_>>) -> Result<u64> {
> + // The OpenRM driver uses wall clock time here not monotonic
> + let sys_time_ns = Instant::<RealTime>::now().as_nanos();
> +
> + // fsp is required on gh100 - return error if not available.
> + let fsp = fsp.ok_or(EINVAL)?;
> +
> + // CAST: realtime system time can't be negative.
> + set_sys_timer_offset(bar, fsp, sys_time_ns as u64)
> + }
> +}
> +
> +const GH100: Gh100 = Gh100;
> +pub(super) const GH100_HAL: &dyn TimerHal = &GH100;
> diff --git a/drivers/gpu/nova-core/timer/hal/tu102.rs b/drivers/gpu/nova-core/timer/hal/tu102.rs
> new file mode 100644
> index 000000000000..064f9b92666e
> --- /dev/null
> +++ b/drivers/gpu/nova-core/timer/hal/tu102.rs
> @@ -0,0 +1,41 @@
> +// SPDX-License-Identifier: GPL-2.0
> +
> +use super::TimerHal;
> +
> +use kernel::{
> + io::Io,
> + prelude::*,
> + time::*, //
> +};
> +
> +use crate::{
> + driver::Bar0,
> + fsp::Fsp,
> + timer::regs::*, //
> +};
> +
> +/// Timer HAL for Turing, Ampere, Ada
> +struct Tu102;
> +
> +fn set_time(bar: Bar0<'_>, time_ns: u64) -> Result {
> + if !bar.read(NV_PTIMER_TIME_PRIV_LEVEL_MASK).level0() {
> + return Err(EINVAL);
> + }
I don't think we want to make probe fail on this since the GPU should
still be usable (I don't know of a pre-GH100 platform that requires the
timer registers to be set in order to work). Let's log in the caller
(which should take a device::Device as argument for that) if this method
returns and error, and continue.
> + bar.write_reg(NV_PTIMER_TIME_1::from_nsec(time_ns));
> + bar.write_reg(NV_PTIMER_TIME_0::from_nsec(time_ns));
> + Ok(())
> +}
> +
> +impl TimerHal for Tu102 {
> + fn setup(&self, bar: Bar0<'_>, _fsp: Option<&Fsp<'_>>) -> Result<u64> {
> + // The OpenRM driver uses wall clock time here not monotonic
> + let sys_time_ns = Instant::<RealTime>::now().as_nanos();
> +
> + // CAST: realtime system time can't be negative.
> + set_time(bar, sys_time_ns as u64)?;
> + Ok(0_u64)
> + }
> +}
> +
> +const TU102: Tu102 = Tu102;
> +pub(super) const TU102_HAL: &dyn TimerHal = &TU102;
> diff --git a/drivers/gpu/nova-core/timer/regs.rs b/drivers/gpu/nova-core/timer/regs.rs
> new file mode 100644
> index 000000000000..229babc2c296
> --- /dev/null
> +++ b/drivers/gpu/nova-core/timer/regs.rs
> @@ -0,0 +1,98 @@
> +// SPDX-License-Identifier: GPL-2.0
> +
> +use kernel::io::register;
> +use kernel::num::Bounded;
nit: `kernel` imports should be grouped.
> +
> +use crate::driver::NovaRegisters;
> +use pin_init::Zeroable;
> +
> +/// Field value for the NSEC field (31:5) of the `_0` registers: `nsec[31:5]`.
> +///
> +/// The GPU timer counts nanoseconds with 32 ns granularity, so `nsec[4:0]` is dropped.
> +fn nsec_lo(nsec: u64) -> Bounded<u32, 27> {
> + Bounded::<u32, 32>::from(nsec as u32).shr::<5, _>()
Since this uses `as`, this needs a `CAST:` comment. Something like:
// CAST: we want to take the lowest 32 bits of `nsec`.
(we may turn a linter on in the future that warns if such comments are
missing, so I'd like to make sure we set them ahead-of-time even if they
are trivial)
> +}
> +
> +/// Field value for the NSEC field (28:0) of the `_1` registers: `nsec[60:32]`.
> +///
> +/// The GPU timer is 61 bits wide, so `nsec[63:61]` is not representable and is
> +/// truncated - the same bits the hardware discards on a raw register write.
> +fn nsec_hi(nsec: u64) -> Bounded<u32, 29> {
> + Bounded::<u32, 29>::from_expr((nsec >> 32) as u32 & 0x1fff_ffff)
And for this one it can be:
// CAST: we are shifting a 64-bit number by 32 bits, leaving 32 bits of value.
Also, instead of the `0x1fff_ffff` mask, can you use
`bits::genmask_u32(0..=28)` (after importing `kernel::bits`)? It makes
it easier to understand what we are masking.
> +}
> +
> +// PTIMER
> +
> +register! {
> + base: NovaRegisters;
> +
> + pub(super) NV_PTIMER_TIME_PRIV_LEVEL_MASK(u32) @ 0x00009430 {
> + 4:4 level0 => bool;
> + }
> +
> + pub(super) NV_PTIMER_TIME_0(u32) @ 0x00009400 {
> + 31:5 nsec;
> + }
> +
> + pub(super) NV_PTIMER_TIME_1(u32) @ 0x00009410 {
> + 28:0 nsec;
> + }
> +}
> +
> +impl NV_PTIMER_TIME_0 {
> + pub(super) fn from_nsec(nsec: u64) -> Self {
> + Self::zeroed().with_nsec(nsec_lo(nsec))
> + }
> +}
> +
> +impl NV_PTIMER_TIME_1 {
> + pub(super) fn from_nsec(nsec: u64) -> Self {
> + Self::zeroed().with_nsec(nsec_hi(nsec))
> + }
> +}
> +
> +pub(super) mod gh100 {
> + use kernel::io::register;
> +
> + use super::{
> + nsec_hi, //
> + nsec_lo,
nit: `//` should be on the last import.
prev parent reply other threads:[~2026-11-10 14:00 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-09 1:55 [PATCH v6 0/2] nova-core: add initial support for gpu timer (v6) Dave Airlie via B4 Relay
2026-11-09 1:55 ` [PATCH v6 1/2] rust: time: expose as_nanos for clock sources Dave Airlie via B4 Relay
2026-11-10 13:56 ` Alexandre Courbot
2026-11-11 19:48 ` Andreas Hindborg
2026-11-11 19:50 ` David Airlie
2026-11-11 14:50 ` Gary Guo
2026-11-09 1:55 ` [PATCH v6 2/2] gpu: nova-core: add support for GPU timer block. (v6) Dave Airlie via B4 Relay
2026-11-09 2:09 ` sashiko-bot
2026-11-10 13:56 ` Alexandre Courbot [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DMRKZS5DW48A.20UQK8GL5PRBG@nvidia.com \
--to=acourbot@nvidia.com \
--cc=a.hindborg@kernel.org \
--cc=airlied@redhat.com \
--cc=aliceryhl@google.com \
--cc=dakr@kernel.org \
--cc=daniel.almeida@collabora.com \
--cc=devnull+airlied.redhat.com@kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=fujita.tomonori@gmail.com \
--cc=gary@garyguo.net \
--cc=nova-gpu@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox