[patch V4 08/14] PCI/MSI: Switch msi_capability_init() to guard(msi_desc_lock)

[Thomas Gleixner <tglx@linutronix.de>]

Split the lock protected functionality of msi_capability_init() out into a
helper function and use guard(msi_desc_lock) to replace the lock/unlock
pair.

No functional change intended.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
V4: Split out from the previous combo patch
---
 drivers/pci/msi/msi.c |   68 ++++++++++++++++++++++++++------------------------
 1 file changed, 36 insertions(+), 32 deletions(-)

--- a/drivers/pci/msi/msi.c
+++ b/drivers/pci/msi/msi.c
@@ -336,38 +336,13 @@ static int msi_verify_entries(struct pci
 	return !entry ? 0 : -EIO;
 }
 
-/**
- * msi_capability_init - configure device's MSI capability structure
- * @dev: pointer to the pci_dev data structure of MSI device function
- * @nvec: number of interrupts to allocate
- * @affd: description of automatic IRQ affinity assignments (may be %NULL)
- *
- * Setup the MSI capability structure of the device with the requested
- * number of interrupts.  A return value of zero indicates the successful
- * setup of an entry with the new MSI IRQ.  A negative return value indicates
- * an error, and a positive return value indicates the number of interrupts
- * which could have been allocated.
- */
-static int msi_capability_init(struct pci_dev *dev, int nvec,
-			       struct irq_affinity *affd)
+static int __msi_capability_init(struct pci_dev *dev, int nvec, struct irq_affinity_desc *masks)
 {
+	int ret = msi_setup_msi_desc(dev, nvec, masks);
 	struct msi_desc *entry, desc;
-	int ret;
-
-	/* Reject multi-MSI early on irq domain enabled architectures */
-	if (nvec > 1 && !pci_msi_domain_supports(dev, MSI_FLAG_MULTI_PCI_MSI, ALLOW_LEGACY))
-		return 1;
-
-	/* Disable MSI during setup in the hardware to erase stale state */
-	pci_msi_set_enable(dev, 0);
 
-	struct irq_affinity_desc *masks __free(kfree) =
-		affd ? irq_create_affinity_masks(nvec, affd) : NULL;
-
-	msi_lock_descs(&dev->dev);
-	ret = msi_setup_msi_desc(dev, nvec, masks);
 	if (ret)
-		goto unlock;
+		return ret;
 
 	/* All MSIs are unmasked by default; mask them all */
 	entry = msi_first_desc(&dev->dev, MSI_DESC_ALL);
@@ -395,16 +370,45 @@ static int msi_capability_init(struct pc
 
 	pcibios_free_irq(dev);
 	dev->irq = entry->irq;
-	goto unlock;
-
+	return 0;
 err:
 	pci_msi_unmask(&desc, msi_multi_mask(&desc));
 	pci_free_msi_irqs(dev);
-unlock:
-	msi_unlock_descs(&dev->dev);
 	return ret;
 }
 
+/**
+ * msi_capability_init - configure device's MSI capability structure
+ * @dev: pointer to the pci_dev data structure of MSI device function
+ * @nvec: number of interrupts to allocate
+ * @affd: description of automatic IRQ affinity assignments (may be %NULL)
+ *
+ * Setup the MSI capability structure of the device with the requested
+ * number of interrupts.  A return value of zero indicates the successful
+ * setup of an entry with the new MSI IRQ.  A negative return value indicates
+ * an error, and a positive return value indicates the number of interrupts
+ * which could have been allocated.
+ */
+static int msi_capability_init(struct pci_dev *dev, int nvec,
+			       struct irq_affinity *affd)
+{
+	/* Reject multi-MSI early on irq domain enabled architectures */
+	if (nvec > 1 && !pci_msi_domain_supports(dev, MSI_FLAG_MULTI_PCI_MSI, ALLOW_LEGACY))
+		return 1;
+
+	/*
+	 * Disable MSI during setup in the hardware, but mark it enabled
+	 * so that setup code can evaluate it.
+	 */
+	pci_msi_set_enable(dev, 0);
+
+	struct irq_affinity_desc *masks __free(kfree) =
+		affd ? irq_create_affinity_masks(nvec, affd) : NULL;
+
+	guard(msi_descs_lock)(&dev->dev);
+	return __msi_capability_init(dev, nvec, masks);
+}
+
 int __pci_enable_msi_range(struct pci_dev *dev, int minvec, int maxvec,
 			   struct irq_affinity *affd)
 {