From: Dave Jiang <dave.jiang@intel.com>
To: shlemisto@gmail.com, linux-ntb <linux-ntb@googlegroups.com>
Cc: jdmason@kudzu.us, perplexus@ya.ru
Subject: Re: Problem with ntb_transport + ntb_netdev
Date: Wed, 11 Jan 2017 09:42:33 -0700 [thread overview]
Message-ID: <6664bf72-a4bb-4081-0fb9-13c66adbec4e@intel.com> (raw)
In-Reply-To: <c18c3dc2-d242-4352-946e-931ff13e1d28@googlegroups.com>
On 01/11/2017 03:08 AM, shlemisto@gmail.com wrote:
>> Do pings in the other direction work?
> Similarly
>>How are the NTBs connected?
> B2B
>>And which distro are you running?
> Ubuntu 16.10 with kernel 4.10.0-rc1 from git
>> Sometimes
> Network Manager will yank the IP for no reason if you don't configure it
> correctly and thus your interface can't route.
> I stop network-manager service before load the modules and set IP manually.
>
>> Also can you dump the stats in debugfs?
> ntb_hw_intel_info_1 <http://pastebin.com/eyMZzSik> - one side
> ntb_hw_intel_info_2 <http://pastebin.com/vF94zLBk> - second side
> ntb_transport_info_1 <http://pastebin.com/Ktq1yAqa> - one side
> ntb_transport_info_2 <http://pastebin.com/w8r08ezB> - second side
Your secondary BAR2 size is not the same as your primary. They both need
to be 22. Also all the upstream memory miss is concerning. You should
have none. You may have signal integrity issues. But fix the bar size
first and see if that helps.
>
> среда, 11 января 2017 г., 1:24:17 UTC+3 пользователь dave.jiang написал:
>
> On 01/10/2017 03:03 PM, Jon Mason wrote:
> > Adding the NTB mailing list
> >
> > On Mon, Jan 9, 2017 at 11:27 AM, perplexus <perp...@ya.ru
> <javascript:>> wrote:
> >> Hello.
> >>
> >> I'm working with NTB (kernel version 4.10) on Xeon D-1527 CPU and
> have a problem with couple ntb_transport + ntb_netdev.
> >>
> >> On the local side I run:
> >> sudo /etc/init.d/irqbalance stop
> >> sudo modprobe ntb_transport dyndbg=+p
> >> sudo modprobe ntb_netdev dyndbg=+p
> >> sudo ifconfig eth0 192.168.1.1 up
> >>
> >> On the remote side I run:
> >> sudo /etc/init.d/irqbalance stop
> >> sudo modprobe ntb_transport dyndbg=+p
> >> sudo modprobe ntb_netdev dyndbg=+p
> >> sudo ifconfig eth0 192.168.1.2 up
> >>
> >> Along with these steps I run ping 192.168.1.2 and get about 2-3
> successfull transmitted/received packets then get 'Destination host
> unreacheble'.
> >>
> >
> > Do pings in the other direction work?
> >
> How are the NTBs connected? Where did the get the hardware? Also can
> you
> dump the stats in debugfs? And which distro are you running? Sometimes
> Network Manager will yank the IP for no reason if you don't
> configure it
> correctly and thus your interface can't route.
>
> --
> You received this message because you are subscribed to the Google
> Groups "linux-ntb" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to linux-ntb+unsubscribe@googlegroups.com
> <mailto:linux-ntb+unsubscribe@googlegroups.com>.
> To post to this group, send email to linux-ntb@googlegroups.com
> <mailto:linux-ntb@googlegroups.com>.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/linux-ntb/c18c3dc2-d242-4352-946e-931ff13e1d28%40googlegroups.com
> <https://groups.google.com/d/msgid/linux-ntb/c18c3dc2-d242-4352-946e-931ff13e1d28%40googlegroups.com?utm_medium=email&utm_source=footer>.
> For more options, visit https://groups.google.com/d/optout.
next prev parent reply other threads:[~2017-01-11 16:42 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <360341483979222@web10o.yandex.ru>
2017-01-10 22:03 ` Problem with ntb_transport + ntb_netdev Jon Mason
2017-01-10 22:24 ` Dave Jiang
2017-01-11 10:08 ` shlemisto
2017-01-11 15:27 ` shlemisto
2017-01-11 16:42 ` Dave Jiang [this message]
2017-01-11 16:45 ` Dave Jiang
2017-01-12 10:28 ` shlemisto
2017-01-12 15:29 ` shlemisto
2017-01-12 16:37 ` Dave Jiang
2017-01-12 16:58 ` shlemisto
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6664bf72-a4bb-4081-0fb9-13c66adbec4e@intel.com \
--to=dave.jiang@intel.com \
--cc=jdmason@kudzu.us \
--cc=linux-ntb@googlegroups.com \
--cc=perplexus@ya.ru \
--cc=shlemisto@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox