From: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
To: Dave Jiang <dave.jiang@intel.com>
Cc: <linux-cxl@vger.kernel.org>, <nvdimm@lists.linux.dev>,
<dan.j.williams@intel.com>, <bwidawsk@kernel.org>,
<ira.weiny@intel.com>, <vishal.l.verma@intel.com>,
<alison.schofield@intel.com>, <dave@stgolabs.net>
Subject: Re: [PATCH v2 05/19] tools/testing/cxl: Add "Set Passphrase" opcode support
Date: Fri, 4 Nov 2022 13:56:33 +0000 [thread overview]
Message-ID: <20221104135633.000069e9@Huawei.com> (raw)
In-Reply-To: <166377431828.430546.12996556155261310755.stgit@djiang5-desk3.ch.intel.com>
On Wed, 21 Sep 2022 08:31:58 -0700
Dave Jiang <dave.jiang@intel.com> wrote:
> Add support to emulate a CXL mem device supporting the "Set Passphrase"
> operation. The operation supports setting of either a user or a master
> passphrase.
>
> Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Hi Dave
A few trivial things inline. With them tidied up.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> ---
> tools/testing/cxl/test/mem.c | 66 ++++++++++++++++++++++++++++++++++++
> tools/testing/cxl/test/mem_pdata.h | 6 +++
> 2 files changed, 72 insertions(+)
>
> diff --git a/tools/testing/cxl/test/mem.c b/tools/testing/cxl/test/mem.c
> index 9002a3ae3ea5..86be5e183b5c 100644
> --- a/tools/testing/cxl/test/mem.c
> +++ b/tools/testing/cxl/test/mem.c
> @@ -154,6 +154,69 @@ static int mock_get_security_state(struct cxl_dev_state *cxlds,
> return 0;
> }
>
> +static int mock_set_passphrase(struct cxl_dev_state *cxlds, struct cxl_mbox_cmd *cmd)
> +{
> + struct cxl_mock_mem_pdata *mdata = dev_get_platdata(cxlds->dev);
> + struct cxl_set_pass *set_pass;
> +
> + if (cmd->size_in != sizeof(*set_pass))
> + return -EINVAL;
> +
> + if (cmd->size_out != 0)
> + return -EINVAL;
> +
> + if (mdata->security_state & CXL_PMEM_SEC_STATE_FROZEN) {
> + cmd->return_code = CXL_MBOX_CMD_RC_SECURITY;
> + return -ENXIO;
> + }
> +
> + set_pass = cmd->payload_in;
> + switch (set_pass->type) {
> + case CXL_PMEM_SEC_PASS_MASTER:
> + if (mdata->security_state & CXL_PMEM_SEC_STATE_MASTER_PLIMIT) {
> + cmd->return_code = CXL_MBOX_CMD_RC_SECURITY;
> + return -ENXIO;
> + }
> + /*
> + * CXL spec v2.0 8.2.9.5.6.2, The master pasphrase shall only be set in
Update to 3.0 references.
> + * the security disabled state when the user passphrase is not set.
> + */
> + if (mdata->security_state & CXL_PMEM_SEC_STATE_USER_PASS_SET) {
> + cmd->return_code = CXL_MBOX_CMD_RC_SECURITY;
> + return -ENXIO;
> + }
> + if (memcmp(mdata->master_pass, set_pass->old_pass, NVDIMM_PASSPHRASE_LEN)) {
> + if (++mdata->master_limit == PASS_TRY_LIMIT)
> + mdata->security_state |= CXL_PMEM_SEC_STATE_MASTER_PLIMIT;
> + cmd->return_code = CXL_MBOX_CMD_RC_PASSPHRASE;
> + return -ENXIO;
> + }
> + memcpy(mdata->master_pass, set_pass->new_pass, NVDIMM_PASSPHRASE_LEN);
> + mdata->security_state |= CXL_PMEM_SEC_STATE_MASTER_PASS_SET;
> + return 0;
> +
> + case CXL_PMEM_SEC_PASS_USER:
> + if (mdata->security_state & CXL_PMEM_SEC_STATE_USER_PLIMIT) {
> + cmd->return_code = CXL_MBOX_CMD_RC_SECURITY;
> + return -ENXIO;
> + }
> + if (memcmp(mdata->user_pass, set_pass->old_pass, NVDIMM_PASSPHRASE_LEN)) {
> + if (++mdata->user_limit == PASS_TRY_LIMIT)
> + mdata->security_state |= CXL_PMEM_SEC_STATE_USER_PLIMIT;
> + cmd->return_code = CXL_MBOX_CMD_RC_PASSPHRASE;
> + return -ENXIO;
> + }
> + memcpy(mdata->user_pass, set_pass->new_pass, NVDIMM_PASSPHRASE_LEN);
> + mdata->security_state |= CXL_PMEM_SEC_STATE_USER_PASS_SET;
> + return 0;
> +
> + default:
> + cmd->return_code = CXL_MBOX_CMD_RC_INPUT;
> + return -EINVAL;
> + }
> + return 0;
Unreachable code.
> +}
> +
> static int mock_get_lsa(struct cxl_dev_state *cxlds, struct cxl_mbox_cmd *cmd)
> {
> struct cxl_mbox_get_lsa *get_lsa = cmd->payload_in;
> @@ -250,6 +313,9 @@ static int cxl_mock_mbox_send(struct cxl_dev_state *cxlds, struct cxl_mbox_cmd *
> case CXL_MBOX_OP_GET_SECURITY_STATE:
> rc = mock_get_security_state(cxlds, cmd);
> break;
> + case CXL_MBOX_OP_SET_PASSPHRASE:
> + rc = mock_set_passphrase(cxlds, cmd);
> + break;
> default:
> break;
> }
> diff --git a/tools/testing/cxl/test/mem_pdata.h b/tools/testing/cxl/test/mem_pdata.h
> index 6a7b111147eb..8eb2dffc9156 100644
> --- a/tools/testing/cxl/test/mem_pdata.h
> +++ b/tools/testing/cxl/test/mem_pdata.h
> @@ -5,6 +5,12 @@
>
> struct cxl_mock_mem_pdata {
> u32 security_state;
> + u8 user_pass[NVDIMM_PASSPHRASE_LEN];
> + u8 master_pass[NVDIMM_PASSPHRASE_LEN];
> + int user_limit;
> + int master_limit;
> };
>
> +#define PASS_TRY_LIMIT 3
> +
> #endif
>
>
next prev parent reply other threads:[~2022-11-04 13:56 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-21 15:31 [PATCH v2 00/19] Introduce security commands for CXL pmem device Dave Jiang
2022-09-21 15:31 ` [PATCH v2 01/19] memregion: Add cpu_cache_invalidate_memregion() interface Dave Jiang
2022-10-13 0:14 ` [PATCH v3] " Davidlohr Bueso
2022-09-21 15:31 ` [PATCH v2 02/19] cxl/pmem: Introduce nvdimm_security_ops with ->get_flags() operation Dave Jiang
2022-09-21 21:07 ` Davidlohr Bueso
2022-09-21 15:31 ` [PATCH v2 03/19] tools/testing/cxl: Add "Get Security State" opcode support Dave Jiang
2022-11-04 12:28 ` Jonathan Cameron
2022-09-21 15:31 ` [PATCH v2 04/19] cxl/pmem: Add "Set Passphrase" security command support Dave Jiang
2022-09-21 20:06 ` Davidlohr Bueso
2022-09-21 15:31 ` [PATCH v2 05/19] tools/testing/cxl: Add "Set Passphrase" opcode support Dave Jiang
2022-11-04 13:56 ` Jonathan Cameron [this message]
2022-09-21 15:32 ` [PATCH v2 06/19] cxl/pmem: Add Disable Passphrase security command support Dave Jiang
2022-09-21 20:09 ` Davidlohr Bueso
2022-09-21 15:32 ` [PATCH v2 07/19] tools/testing/cxl: Add "Disable" security opcode support Dave Jiang
2022-11-07 14:36 ` Jonathan Cameron
2022-09-21 15:32 ` [PATCH v2 08/19] cxl/pmem: Add "Freeze Security State" security command support Dave Jiang
2022-09-21 20:25 ` Davidlohr Bueso
2022-09-21 15:32 ` [PATCH v2 09/19] tools/testing/cxl: Add "Freeze Security State" security opcode support Dave Jiang
2022-11-07 14:44 ` Jonathan Cameron
2022-11-07 19:01 ` Dave Jiang
2022-11-11 10:27 ` Jonathan Cameron
2022-09-21 15:32 ` [PATCH v2 10/19] cxl/pmem: Add "Unlock" security command support Dave Jiang
2022-09-21 21:49 ` Davidlohr Bueso
2022-11-07 14:55 ` Jonathan Cameron
2022-09-21 15:32 ` [PATCH v2 11/19] tools/testing/cxl: Add "Unlock" security opcode support Dave Jiang
2022-11-07 15:00 ` Jonathan Cameron
2022-09-21 15:32 ` [PATCH v2 12/19] cxl/pmem: Add "Passphrase Secure Erase" security command support Dave Jiang
2022-09-21 20:15 ` Davidlohr Bueso
2022-09-21 21:23 ` Dave Jiang
2022-11-07 15:25 ` Jonathan Cameron
2022-11-07 20:19 ` Dave Jiang
2022-09-21 15:32 ` [PATCH v2 13/19] tools/testing/cxl: Add "passphrase secure erase" opcode support Dave Jiang
2022-11-07 15:35 ` Jonathan Cameron
2022-11-07 21:58 ` Dave Jiang
2022-09-21 15:32 ` [PATCH v2 14/19] nvdimm/cxl/pmem: Add support for master passphrase disable security command Dave Jiang
2022-11-07 15:38 ` Jonathan Cameron
2022-09-21 15:32 ` [PATCH v2 15/19] cxl/pmem: add id attribute to CXL based nvdimm Dave Jiang
2022-11-07 15:41 ` Jonathan Cameron
2022-09-21 15:33 ` [PATCH v2 16/19] tools/testing/cxl: add mechanism to lock mem device for testing Dave Jiang
2022-11-07 15:56 ` Jonathan Cameron
2022-11-07 22:33 ` Dave Jiang
2022-09-21 15:33 ` [PATCH v2 17/19] cxl/pmem: add provider name to cxl pmem dimm attribute group Dave Jiang
2022-11-07 15:58 ` Jonathan Cameron
2022-11-07 23:46 ` Dave Jiang
2022-09-21 15:33 ` [PATCH v2 18/19] libnvdimm: Introduce CONFIG_NVDIMM_SECURITY_TEST flag Dave Jiang
2022-11-07 16:01 ` Jonathan Cameron
2022-11-07 23:46 ` Dave Jiang
2022-09-21 15:33 ` [PATCH v2 19/19] cxl: add dimm_id support for __nvdimm_create() Dave Jiang
2022-09-23 10:31 ` Davidlohr Bueso
2022-09-23 16:18 ` Dave Jiang
2022-11-07 16:05 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221104135633.000069e9@Huawei.com \
--to=jonathan.cameron@huawei.com \
--cc=alison.schofield@intel.com \
--cc=bwidawsk@kernel.org \
--cc=dan.j.williams@intel.com \
--cc=dave.jiang@intel.com \
--cc=dave@stgolabs.net \
--cc=ira.weiny@intel.com \
--cc=linux-cxl@vger.kernel.org \
--cc=nvdimm@lists.linux.dev \
--cc=vishal.l.verma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox