From: sashiko-bot@kernel.org
To: "Anisa Su" <anisa.su887@gmail.com>
Cc: nvdimm@lists.linux.dev, linux-cxl@vger.kernel.org
Subject: Re: [PATCH v11 07/31] cxl/region: Add DC DAX region support
Date: Thu, 25 Jun 2026 18:16:49 +0000 [thread overview]
Message-ID: <20260625181650.52E881F000E9@smtp.kernel.org> (raw)
In-Reply-To: <20260625112638.550691-8-anisa.su@samsung.com>
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [High] Lockless access to `cxlmd->cxlds` via the newly introduced `cxled_to_mds()` helper in `store_targetN()` leads to a NULL pointer dereference during concurrent device teardown.
--
commit 0243c2c435424873e37aafdcb17aee31b0ea07a1
Author: Ira Weiny <iweiny@kernel.org>
cxl/region: Add DC DAX region support
This commit introduces dynamic DAX regions to support CXL DC capabilities.
It adds a new sysfs attribute for creating dynamic RAM regions and updates
target attachment logic to handle DCD support.
> diff --git a/drivers/cxl/core/core.h b/drivers/cxl/core/core.h
> index 82ca3a4767080..9ed141fa13341 100644
> --- a/drivers/cxl/core/core.h
> +++ b/drivers/cxl/core/core.h
[ ... ]
> @@ -18,6 +19,13 @@ enum cxl_detach_mode {
> DETACH_INVALIDATE,
> };
>
> +static inline struct cxl_memdev_state *
> +cxled_to_mds(struct cxl_endpoint_decoder *cxled)
> +{
> + struct cxl_memdev *cxlmd = cxled_to_memdev(cxled);
> + return to_cxl_memdev_state(cxlmd->cxlds);
> +}
[Severity: High]
Can this result in a NULL pointer dereference during concurrent device
teardown?
If a user writes to a CXL region's targetX sysfs file, store_targetN()
calls cxled_to_mds() without holding locks that synchronize with device
teardown.
Concurrently, if the CXL device is hot-removed or the driver is unbound,
cxl_memdev_shutdown() nullifies cxlmd->cxlds under cxl_memdev_rwsem.
This would cause cxled_to_mds() to pass a NULL pointer to
to_cxl_memdev_state(), which unconditionally dereferences it:
drivers/cxl/cxlmem.h:to_cxl_memdev_state() {
if (cxlds->type != CXL_DEVTYPE_CLASSMEM)
return NULL;
...
}
Does this path need to hold cxl_memdev_rwsem or otherwise verify
cxlmd->cxlds is not NULL before using it?
> +
> #ifdef CONFIG_CXL_REGION
>
> struct cxl_region_context {
[ ... ]
> diff --git a/drivers/cxl/core/region.c b/drivers/cxl/core/region.c
> index e50dc716d4e82..ba03ec5e27c32 100644
> --- a/drivers/cxl/core/region.c
> +++ b/drivers/cxl/core/region.c
[ ... ]
> @@ -2389,6 +2396,8 @@ static size_t store_targetN(struct cxl_region *cxlr, const char *buf, int pos,
> if (sysfs_streq(buf, "\n"))
> rc = detach_target(cxlr, pos);
> else {
> + struct cxl_endpoint_decoder *cxled;
> + struct cxl_memdev_state *mds;
> struct device *dev;
>
> dev = bus_find_device_by_name(&cxl_bus_type, NULL, buf);
> @@ -2400,8 +2409,21 @@ static size_t store_targetN(struct cxl_region *cxlr, const char *buf, int pos,
> goto out;
> }
>
> - rc = attach_target(cxlr, to_cxl_endpoint_decoder(dev), pos,
> - TASK_INTERRUPTIBLE);
> + cxled = to_cxl_endpoint_decoder(dev);
> + if (cxlr->mode == CXL_PARTMODE_DYNAMIC_RAM_1) {
> + mds = cxled_to_mds(cxled);
> + if (!mds) {
> + dev_dbg(dev, "No memdev state\n");
> + rc = -ENODEV;
> + goto out;
> + }
> + if (!cxl_dcd_supported(mds)) {
> + dev_dbg(dev, "DCD unsupported\n");
> + rc = -EINVAL;
> + goto out;
> + }
> + }
> + rc = attach_target(cxlr, cxled, pos, TASK_INTERRUPTIBLE);
> out:
> put_device(dev);
> }
--
Sashiko AI review · https://sashiko.dev/#/patchset/20260625112638.550691-1-anisa.su@samsung.com?part=7
next prev parent reply other threads:[~2026-06-25 18:16 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-25 11:04 DCD: Add support for Dynamic Capacity Devices (DCD) Anisa Su
2026-06-25 11:04 ` [PATCH v11 01/31] cxl/mbox: Flag " Anisa Su
2026-06-26 21:43 ` Dave Jiang
2026-06-25 11:04 ` [PATCH v11 02/31] cxl/mem: Read dynamic capacity configuration from the device Anisa Su
2026-06-25 18:16 ` sashiko-bot
2026-06-26 22:26 ` Dave Jiang
2026-06-25 11:04 ` [PATCH v11 04/31] cxl/core: Enforce partition order/simplify partition calls Anisa Su
2026-06-26 22:37 ` Dave Jiang
2026-06-25 11:04 ` [PATCH v11 05/31] cxl/mem: Expose dynamic ram 1 partition in sysfs Anisa Su
2026-06-25 18:12 ` sashiko-bot
2026-06-26 23:08 ` Dave Jiang
2026-06-25 11:04 ` [PATCH v11 06/31] cxl/port: Add 'dynamic_ram_1' to endpoint decoder mode Anisa Su
2026-06-25 11:04 ` [PATCH v11 07/31] cxl/region: Add DC DAX region support Anisa Su
2026-06-25 18:16 ` sashiko-bot [this message]
2026-06-26 23:18 ` Dave Jiang
2026-06-25 11:04 ` [PATCH v11 08/31] cxl/events: Split event msgnum configuration from irq setup Anisa Su
2026-06-25 11:04 ` [PATCH v11 09/31] cxl/pci: Factor out interrupt policy check Anisa Su
2026-06-25 11:04 ` [PATCH v11 10/31] cxl/mem: Configure dynamic capacity interrupts Anisa Su
2026-06-25 18:14 ` sashiko-bot
2026-07-07 21:51 ` Cheatham, Benjamin
2026-06-25 11:04 ` [PATCH v11 11/31] cxl/core: Return endpoint decoder information from region search Anisa Su
2026-06-25 11:04 ` [PATCH v11 12/31] cxl/mem: Set up framework for handling DC Events Anisa Su
2026-06-25 18:12 ` sashiko-bot
2026-06-26 21:54 ` Dave Jiang
2026-06-25 11:04 ` [PATCH v11 13/31] cxl/mem: Add 20 second timeout for stalled DC_ADD_CAPACITY chains Anisa Su
2026-06-25 18:15 ` sashiko-bot
2026-06-30 21:11 ` Dave Jiang
2026-06-25 11:04 ` [PATCH v11 14/31] cxl/extent: Handle DC Add Capacity events Anisa Su
2026-06-25 18:16 ` sashiko-bot
2026-06-25 11:04 ` [PATCH v11 15/31] cxl/mem: Drop misaligned DCD extent groups Anisa Su
2026-06-25 18:19 ` sashiko-bot
2026-06-30 21:23 ` Dave Jiang
2026-06-25 11:04 ` [PATCH v11 16/31] cxl/extent: Validate DC extent partition Anisa Su
2026-06-25 18:20 ` sashiko-bot
2026-06-30 22:49 ` Dave Jiang
2026-06-25 11:04 ` [PATCH v11 17/31] cxl/mem: Enforce tag-group semantics Anisa Su
2026-06-25 18:24 ` sashiko-bot
2026-06-25 11:04 ` [PATCH v11 18/31] cxl/extent: Handle DC Release Capacity events Anisa Su
2026-06-25 18:23 ` sashiko-bot
2026-06-25 11:04 ` [PATCH v11 19/31] cxl/extent: Enforce cross-region tag uniqueness Anisa Su
2026-06-25 18:23 ` sashiko-bot
2026-06-25 11:04 ` [PATCH v11 20/31] cxl/region/extent: Expose dc_extent information in sysfs Anisa Su
2026-06-25 18:33 ` sashiko-bot
2026-06-25 11:04 ` [PATCH v11 21/31] cxl + dax: Surface dax_resources on DCD Add Capacity events Anisa Su
2026-06-25 18:29 ` sashiko-bot
2026-06-25 11:04 ` [PATCH v11 22/31] cxl + dax: Release dax_resources on DCD Release " Anisa Su
2026-06-25 18:36 ` sashiko-bot
2026-06-25 11:05 ` [PATCH v11 23/31] dax/bus: Factor out dev dax resize logic Anisa Su
2026-06-25 18:27 ` sashiko-bot
2026-06-25 11:05 ` [PATCH v11 24/31] dax/bus: Add uuid sysfs attribute to dax devices Anisa Su
2026-06-30 23:21 ` Dave Jiang
2026-06-25 11:05 ` [PATCH v11 25/31] dax/bus: Reject resize on DC dax devices and enforce 0-size creation Anisa Su
2026-06-25 11:05 ` [PATCH v11 26/31] dax/bus: Tag-aware uuid claim and show on DC dax devices Anisa Su
2026-06-25 18:26 ` sashiko-bot
2026-06-25 11:05 ` [PATCH v11 27/31] cxl/region: Read existing extents on region creation Anisa Su
2026-06-25 18:32 ` sashiko-bot
2026-06-25 11:05 ` [PATCH v11 28/31] cxl/mem: Trace Dynamic capacity Event Record Anisa Su
2026-06-25 18:29 ` sashiko-bot
2026-06-25 11:05 ` [PATCH v11 29/31] tools/testing/cxl: Make event logs dynamic Anisa Su
2026-06-25 18:31 ` sashiko-bot
2026-06-25 11:05 ` [PATCH v11 30/31] tools/testing/cxl: Add DC Regions to mock mem data Anisa Su
2026-06-25 18:34 ` sashiko-bot
2026-06-25 11:05 ` [PATCH v11 31/31] Documentation/cxl: Document DCD extent handling and DC-backed DAX regions Anisa Su
2026-06-25 18:24 ` sashiko-bot
2026-06-25 18:00 ` [PATCH v11 03/31] cxl/cdat: Gather DSMAS data for DCD partitions Anisa Su
2026-06-26 22:30 ` Dave Jiang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260625181650.52E881F000E9@smtp.kernel.org \
--to=sashiko-bot@kernel.org \
--cc=anisa.su887@gmail.com \
--cc=linux-cxl@vger.kernel.org \
--cc=nvdimm@lists.linux.dev \
--cc=sashiko-reviews@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox