From: Ryan Ding <ryan.ding@oracle.com>
To: ocfs2-devel@oss.oracle.com
Subject: [Ocfs2-devel] [PATCH 4/8] ocfs2: do not change i_size in write_end for direct io
Date: Fri, 11 Sep 2015 16:19:15 +0800 [thread overview]
Message-ID: <1441959559-29947-5-git-send-email-ryan.ding@oracle.com> (raw)
In-Reply-To: <1441959559-29947-1-git-send-email-ryan.ding@oracle.com>
To support direct io in ocfs2_write_begin_nolock & ocfs2_write_end_nolock.
Append direct io do not change i_size in get block phase. It only move to
orphan when starting write. After data is written to disk, it will delete
itself from orphan and update i_size. So skip i_size change section in
write_begin for direct io.
And when there is no extents alloc, no meta data changes needed for direct io
(since write_begin start trans for 2 reason: alloc extents & change i_size. Now
none of them needed). So we can skip start trans procedure.
Signed-off-by: Ryan Ding <ryan.ding@oracle.com>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
cc: Joseph Qi <joseph.qi@huawei.com>
---
fs/ocfs2/aops.c | 79 ++++++++++++++++++++++++++++++++-----------------------
1 files changed, 46 insertions(+), 33 deletions(-)
diff --git a/fs/ocfs2/aops.c b/fs/ocfs2/aops.c
index eff5b59..41563aa 100644
--- a/fs/ocfs2/aops.c
+++ b/fs/ocfs2/aops.c
@@ -2035,8 +2035,10 @@ static int ocfs2_expand_nonsparse_inode(struct inode *inode,
if (ret)
mlog_errno(ret);
- wc->w_first_new_cpos =
- ocfs2_clusters_for_bytes(inode->i_sb, i_size_read(inode));
+ /* There is no wc if this is call from direct. */
+ if (wc)
+ wc->w_first_new_cpos =
+ ocfs2_clusters_for_bytes(inode->i_sb, i_size_read(inode));
return ret;
}
@@ -2127,14 +2129,17 @@ try_again:
}
}
- if (ocfs2_sparse_alloc(osb))
- ret = ocfs2_zero_tail(inode, di_bh, pos);
- else
- ret = ocfs2_expand_nonsparse_inode(inode, di_bh, pos, len,
- wc);
- if (ret) {
- mlog_errno(ret);
- goto out;
+ /* Direct io change i_size late, should not zero tail here. */
+ if (type != OCFS2_WRITE_DIRECT) {
+ if (ocfs2_sparse_alloc(osb))
+ ret = ocfs2_zero_tail(inode, di_bh, pos);
+ else
+ ret = ocfs2_expand_nonsparse_inode(inode, di_bh, pos,
+ len, wc);
+ if (ret) {
+ mlog_errno(ret);
+ goto out;
+ }
}
ret = ocfs2_check_range_for_refcount(inode, pos, len);
@@ -2195,8 +2200,9 @@ try_again:
credits = ocfs2_calc_extend_credits(inode->i_sb,
&di->id2.i_list);
-
- }
+ } else if (type == OCFS2_WRITE_DIRECT)
+ /* direct write needs not to start trans if no extents alloc. */
+ goto success;
/*
* We have to zero sparse allocated clusters, unwritten extent clusters,
@@ -2394,12 +2400,14 @@ int ocfs2_write_end_nolock(struct address_space *mapping,
handle_t *handle = wc->w_handle;
struct page *tmppage;
- ret = ocfs2_journal_access_di(handle, INODE_CACHE(inode), wc->w_di_bh,
- OCFS2_JOURNAL_ACCESS_WRITE);
- if (ret) {
- copied = ret;
- mlog_errno(ret);
- goto out;
+ if (handle) {
+ ret = ocfs2_journal_access_di(handle, INODE_CACHE(inode),
+ wc->w_di_bh, OCFS2_JOURNAL_ACCESS_WRITE);
+ if (ret) {
+ copied = ret;
+ mlog_errno(ret);
+ goto out;
+ }
}
if (OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL) {
@@ -2442,25 +2450,29 @@ int ocfs2_write_end_nolock(struct address_space *mapping,
}
if (page_has_buffers(tmppage)) {
- if (ocfs2_should_order_data(inode))
- ocfs2_jbd2_file_inode(wc->w_handle, inode);
+ if (handle && ocfs2_should_order_data(inode))
+ ocfs2_jbd2_file_inode(handle, inode);
block_commit_write(tmppage, from, to);
}
}
out_write_size:
- pos += copied;
- if (pos > i_size_read(inode)) {
- i_size_write(inode, pos);
- mark_inode_dirty(inode);
- }
- inode->i_blocks = ocfs2_inode_sector_count(inode);
- di->i_size = cpu_to_le64((u64)i_size_read(inode));
- inode->i_mtime = inode->i_ctime = CURRENT_TIME;
- di->i_mtime = di->i_ctime = cpu_to_le64(inode->i_mtime.tv_sec);
- di->i_mtime_nsec = di->i_ctime_nsec = cpu_to_le32(inode->i_mtime.tv_nsec);
- ocfs2_update_inode_fsync_trans(handle, inode, 1);
- ocfs2_journal_dirty(handle, wc->w_di_bh);
+ /* Direct io do not update i_size here. */
+ if (wc->w_type != OCFS2_WRITE_DIRECT) {
+ pos += copied;
+ if (pos > i_size_read(inode)) {
+ i_size_write(inode, pos);
+ mark_inode_dirty(inode);
+ }
+ inode->i_blocks = ocfs2_inode_sector_count(inode);
+ di->i_size = cpu_to_le64((u64)i_size_read(inode));
+ inode->i_mtime = inode->i_ctime = CURRENT_TIME;
+ di->i_mtime = di->i_ctime = cpu_to_le64(inode->i_mtime.tv_sec);
+ di->i_mtime_nsec = di->i_ctime_nsec = cpu_to_le32(inode->i_mtime.tv_nsec);
+ ocfs2_update_inode_fsync_trans(handle, inode, 1);
+ }
+ if (handle)
+ ocfs2_journal_dirty(handle, wc->w_di_bh);
out:
/* unlock pages before dealloc since it needs acquiring j_trans_barrier
@@ -2470,7 +2482,8 @@ out:
*/
ocfs2_unlock_pages(wc);
- ocfs2_commit_trans(osb, handle);
+ if (handle)
+ ocfs2_commit_trans(osb, handle);
ocfs2_run_deallocs(osb, &wc->w_dealloc);
--
1.7.1
next prev parent reply other threads:[~2015-09-11 8:19 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-11 8:19 [Ocfs2-devel] [PATCH 0/8] ocfs2: fix ocfs2 direct io code patch to support sparse file and data ordering semantics Ryan Ding
2015-09-11 8:19 ` [Ocfs2-devel] [PATCH 1/8] ocfs2: add ocfs2_write_type_t type to identify the caller of write Ryan Ding
2015-09-11 8:19 ` [Ocfs2-devel] [PATCH 2/8] ocfs2: use c_new to indicate newly allocated extents Ryan Ding
2015-09-11 8:19 ` [Ocfs2-devel] [PATCH 3/8] ocfs2: test target page before change it Ryan Ding
2015-09-11 8:19 ` Ryan Ding [this message]
2015-09-11 8:19 ` [Ocfs2-devel] [PATCH 5/8] ocfs2: return the physical address in ocfs2_write_cluster Ryan Ding
2015-09-11 8:19 ` [Ocfs2-devel] [PATCH 6/8] ocfs2: record UNWRITTEN extents when populate write desc Ryan Ding
2015-09-11 8:19 ` [Ocfs2-devel] [PATCH 7/8] ocfs2: fix sparse file & data ordering issue in direct io Ryan Ding
2015-09-11 8:19 ` [Ocfs2-devel] [PATCH 8/8] ocfs2: code clean up for " Ryan Ding
2015-09-28 10:20 ` [Ocfs2-devel] [PATCH 0/8] ocfs2: fix ocfs2 direct io code patch to support sparse file and data ordering semantics Joseph Qi
2015-10-08 3:12 ` Ryan Ding
2015-10-08 6:13 ` Joseph Qi
2015-10-08 7:13 ` Ryan Ding
2015-10-12 6:34 ` Ryan Ding
2015-12-10 7:54 ` Joseph Qi
2015-12-10 8:48 ` Ryan Ding
2015-12-10 10:36 ` Joseph Qi
2015-12-14 5:31 ` Ryan Ding
2015-12-14 10:36 ` Joseph Qi
2015-12-16 1:39 ` Ryan Ding
2015-12-16 2:26 ` Joseph Qi
2015-12-16 3:12 ` Ryan Ding
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1441959559-29947-5-git-send-email-ryan.ding@oracle.com \
--to=ryan.ding@oracle.com \
--cc=ocfs2-devel@oss.oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox