From: Eric Ren <zren@suse.com>
To: ocfs2-devel@oss.oracle.com
Subject: [Ocfs2-devel] [PATCH 4/6] ocfs2: o2hb: add some user/debug log
Date: Mon, 25 Jan 2016 11:28:15 +0800 [thread overview]
Message-ID: <20160125032815.GB7746@laptop.ha> (raw)
In-Reply-To: <1453259619-5347-5-git-send-email-junxiao.bi@oracle.com>
Hi Junxiao,
On Wed, Jan 20, 2016 at 11:13:37AM +0800, Junxiao Bi wrote:
> Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
> Reviewed-by: Ryan Ding <ryan.ding@oracle.com>
> ---
> fs/ocfs2/cluster/heartbeat.c | 39 ++++++++++++++++++++++++++++++++-------
> 1 file changed, 32 insertions(+), 7 deletions(-)
>
> diff --git a/fs/ocfs2/cluster/heartbeat.c b/fs/ocfs2/cluster/heartbeat.c
> index d5ef8dce08da..6c57fd21e597 100644
> --- a/fs/ocfs2/cluster/heartbeat.c
> +++ b/fs/ocfs2/cluster/heartbeat.c
> @@ -292,6 +292,8 @@ struct o2hb_bio_wait_ctxt {
> int wc_error;
> };
>
> +#define O2HB_NEGO_TIMEOUT_MS (O2HB_MAX_WRITE_TIMEOUT_MS/2)
> +
> enum {
> O2HB_NEGO_TIMEOUT_MSG = 1,
> O2HB_NEGO_APPROVE_MSG = 2,
> @@ -359,7 +361,7 @@ static void o2hb_arm_timeout(struct o2hb_region *reg)
> cancel_delayed_work(®->hr_nego_timeout_work);
> /* negotiate timeout must be less than write timeout. */
> schedule_delayed_work(®->hr_nego_timeout_work,
> - msecs_to_jiffies(O2HB_MAX_WRITE_TIMEOUT_MS)/2);
> + msecs_to_jiffies(O2HB_NEGO_TIMEOUT_MS));
> memset(reg->hr_nego_node_bitmap, 0, sizeof(reg->hr_nego_node_bitmap));
> }
>
> @@ -393,14 +395,19 @@ static void o2hb_nego_timeout(struct work_struct *work)
> container_of(work, struct o2hb_region,
> hr_nego_timeout_work.work);
> unsigned long live_node_bitmap[BITS_TO_LONGS(O2NM_MAX_NODES)];
> - int master_node, i;
> + int master_node, i, ret;
>
> o2hb_fill_node_map(live_node_bitmap, sizeof(live_node_bitmap));
> /* lowest node as master node to make negotiate decision. */
> master_node = find_next_bit(live_node_bitmap, O2NM_MAX_NODES, 0);
>
> if (master_node == o2nm_this_node()) {
> - set_bit(master_node, reg->hr_nego_node_bitmap);
> + if (!test_bit(master_node, reg->hr_nego_node_bitmap)) {
> + printk(KERN_NOTICE "o2hb: node %d hb write hung for %ds on region %s (%s).\n",
> + o2nm_this_node(), O2HB_NEGO_TIMEOUT_MS/1000,
> + config_item_name(®->hr_item), reg->hr_dev_name);
> + set_bit(master_node, reg->hr_nego_node_bitmap);
> + }
> if (memcmp(reg->hr_nego_node_bitmap, live_node_bitmap,
> sizeof(reg->hr_nego_node_bitmap))) {
> /* check negotiate bitmap every second to do timeout
> @@ -412,6 +419,8 @@ static void o2hb_nego_timeout(struct work_struct *work)
> return;
> }
>
> + printk(KERN_NOTICE "o2hb: all nodes hb write hung, maybe region %s (%s) is down.\n",
> + config_item_name(®->hr_item), reg->hr_dev_name);
> /* approve negotiate timeout request. */
> o2hb_arm_timeout(reg);
>
> @@ -421,13 +430,23 @@ static void o2hb_nego_timeout(struct work_struct *work)
> if (i == master_node)
> continue;
>
> - o2hb_send_nego_msg(reg->hr_key,
> + mlog(ML_HEARTBEAT, "send NEGO_APPROVE msg to node %d\n", i);
> + ret = o2hb_send_nego_msg(reg->hr_key,
> O2HB_NEGO_APPROVE_MSG, i);
> + if (ret)
> + mlog(ML_ERROR, "send NEGO_APPROVE msg to node %d fail %d\n",
> + i, ret);
> }
> } else {
> /* negotiate timeout with master node. */
> - o2hb_send_nego_msg(reg->hr_key, O2HB_NEGO_TIMEOUT_MSG,
> - master_node);
> + printk(KERN_NOTICE "o2hb: node %d hb write hung for %ds on region %s (%s), negotiate timeout with node %d.\n",
> + o2nm_this_node(), O2HB_NEGO_TIMEOUT_MS/1000, config_item_name(®->hr_item),
> + reg->hr_dev_name, master_node);
> + ret = o2hb_send_nego_msg(reg->hr_key, O2HB_NEGO_TIMEOUT_MSG,
> + master_node);
> + if (ret)
> + mlog(ML_ERROR, "send NEGO_TIMEOUT msg to node %d fail %d\n",
> + master_node, ret);
> }
> }
>
> @@ -438,6 +457,8 @@ static int o2hb_nego_timeout_handler(struct o2net_msg *msg, u32 len, void *data,
> struct o2hb_nego_msg *nego_msg;
>
> nego_msg = (struct o2hb_nego_msg *)msg->buf;
> + printk(KERN_NOTICE "o2hb: receive negotiate timeout message from node %d on region %s (%s).\n",
> + nego_msg->node_num, config_item_name(®->hr_item), reg->hr_dev_name);
> if (nego_msg->node_num < O2NM_MAX_NODES)
> set_bit(nego_msg->node_num, reg->hr_nego_node_bitmap);
> else
> @@ -449,7 +470,11 @@ static int o2hb_nego_timeout_handler(struct o2net_msg *msg, u32 len, void *data,
> static int o2hb_nego_approve_handler(struct o2net_msg *msg, u32 len, void *data,
> void **ret_data)
> {
> - o2hb_arm_timeout((struct o2hb_region *)data);
> + struct o2hb_region *reg = (struct o2hb_region *)data;
> +
> + printk(KERN_NOTICE "o2hb: negotiate timeout approved by master node on region %s (%s).\n",
> + config_item_name(®->hr_item), reg->hr_dev_name);
> + o2hb_arm_timeout(reg);
Why mix the use of printk and mlog? Any rules to follow?
Thanks,
Eric
> return 0;
> }
>
> --
> 1.7.9.5
>
>
> _______________________________________________
> Ocfs2-devel mailing list
> Ocfs2-devel at oss.oracle.com
> https://oss.oracle.com/mailman/listinfo/ocfs2-devel
>
next prev parent reply other threads:[~2016-01-25 3:28 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-20 3:13 [Ocfs2-devel] ocfs2: o2hb: not fence self if storage down Junxiao Bi
2016-01-20 3:13 ` [Ocfs2-devel] [PATCH 1/6] ocfs2: o2hb: add negotiate timer Junxiao Bi
2016-01-21 23:42 ` Andrew Morton
2016-01-22 3:23 ` Junxiao Bi
2016-01-22 0:56 ` Joseph Qi
2016-01-22 3:19 ` Junxiao Bi
2016-01-20 3:13 ` [Ocfs2-devel] [PATCH 2/6] ocfs2: o2hb: add NEGO_TIMEOUT message Junxiao Bi
2016-01-21 23:47 ` Andrew Morton
2016-01-22 5:12 ` Junxiao Bi
2016-01-22 5:45 ` Andrew Morton
2016-01-22 5:46 ` Junxiao Bi
2016-01-25 3:18 ` Eric Ren
2016-01-25 4:28 ` Junxiao Bi
2016-01-25 5:59 ` Eric Ren
2016-01-20 3:13 ` [Ocfs2-devel] [PATCH 3/6] ocfs2: o2hb: add NEGOTIATE_APPROVE message Junxiao Bi
2016-01-20 3:13 ` [Ocfs2-devel] [PATCH 4/6] ocfs2: o2hb: add some user/debug log Junxiao Bi
2016-01-25 3:28 ` Eric Ren [this message]
2016-01-25 4:29 ` Junxiao Bi
2016-01-25 6:00 ` Eric Ren
2016-01-20 3:13 ` [Ocfs2-devel] [PATCH 5/6] ocfs2: o2hb: don't negotiate if last hb fail Junxiao Bi
2016-01-20 3:13 ` [Ocfs2-devel] [PATCH 6/6] ocfs2: o2hb: fix hb hung time Junxiao Bi
2016-01-20 6:00 ` [Ocfs2-devel] ocfs2: o2hb: not fence self if storage down Gang He
2016-01-20 8:09 ` Junxiao Bi
2016-01-20 9:18 ` Joseph Qi
2016-01-20 13:27 ` Junxiao Bi
2016-01-21 0:46 ` Joseph Qi
2016-01-21 1:48 ` Junxiao Bi
2016-01-22 4:25 ` Joseph Qi
2016-01-22 5:08 ` Junxiao Bi
2016-01-21 8:34 ` rwxybh
2016-01-21 8:41 ` Junxiao Bi
-- strict thread matches above, loose matches on Subject: below --
2016-05-23 21:50 [Ocfs2-devel] [patch 4/6] ocfs2: o2hb: add some user/debug log akpm at linux-foundation.org
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160125032815.GB7746@laptop.ha \
--to=zren@suse.com \
--cc=ocfs2-devel@oss.oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).