[Ocfs2-devel] [PATCH V2] ocfs2: update inode size after zeroed the hole

[Junxiao Bi <junxiao.bi@oracle.com>]

Hi Joel, Mark, Sunil,

Could you help review this patch? Now it's in mmotm tree and need your
ack to go in mainline. This bug can cause sparse file hole with non-zero
data, and cause a big confuse to customer who think they have a corrupt
file.

Thanks,
Junxiao.

On 07/12/2013 10:55 AM, Junxiao Bi wrote:
> fs-writeback will release the dirty pages without page lock
> whose offset are over inode size, the release happens at
> block_write_full_page_endio(). If not update, dirty pages
> in file holes may be released before flushed to the disk,
> then file holes will contain some non-zero data, this will
> cause sparse file md5sum error.
>
> To reproduce the bug, find a big sparse file with many holes,
> like vm image file, its actual size should be bigger than
> available mem size to make writeback work more frequently,
> tar it with -S option, then keep untar it and check its md5sum
> again and again until you get a wrong md5sum.
>
> Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
> ---
>  fs/ocfs2/file.c |   40 ++++++++++++++++++++++++++++++++--------
>  1 file changed, 32 insertions(+), 8 deletions(-)
>
> diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
> index ff54014..3ce6a8b 100644
> --- a/fs/ocfs2/file.c
> +++ b/fs/ocfs2/file.c
> @@ -723,7 +723,8 @@ leave:
>   * While a write will already be ordering the data, a truncate will not.
>   * Thus, we need to explicitly order the zeroed pages.
>   */
> -static handle_t *ocfs2_zero_start_ordered_transaction(struct inode *inode)
> +static handle_t *ocfs2_zero_start_ordered_transaction(struct inode *inode,
> +						struct buffer_head *di_bh)
>  {
>  	struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
>  	handle_t *handle = NULL;
> @@ -740,7 +741,14 @@ static handle_t *ocfs2_zero_start_ordered_transaction(struct inode *inode)
>  	}
>  
>  	ret = ocfs2_jbd2_file_inode(handle, inode);
> -	if (ret < 0)
> +	if (ret < 0) {
> +		mlog_errno(ret);
> +		goto out;
> +	}
> +
> +	ret = ocfs2_journal_access_di(handle, INODE_CACHE(inode), di_bh,
> +				      OCFS2_JOURNAL_ACCESS_WRITE);
> +	if (ret)
>  		mlog_errno(ret);
>  
>  out:
> @@ -756,7 +764,7 @@ out:
>   * to be too fragile to do exactly what we need without us having to
>   * worry about recursive locking in ->write_begin() and ->write_end(). */
>  static int ocfs2_write_zero_page(struct inode *inode, u64 abs_from,
> -				 u64 abs_to)
> +				 u64 abs_to, struct buffer_head *di_bh)
>  {
>  	struct address_space *mapping = inode->i_mapping;
>  	struct page *page;
> @@ -764,6 +772,7 @@ static int ocfs2_write_zero_page(struct inode *inode, u64 abs_from,
>  	handle_t *handle = NULL;
>  	int ret = 0;
>  	unsigned zero_from, zero_to, block_start, block_end;
> +	struct ocfs2_dinode *di = (struct ocfs2_dinode *)di_bh->b_data;
>  
>  	BUG_ON(abs_from >= abs_to);
>  	BUG_ON(abs_to > (((u64)index + 1) << PAGE_CACHE_SHIFT));
> @@ -806,7 +815,8 @@ static int ocfs2_write_zero_page(struct inode *inode, u64 abs_from,
>  		}
>  
>  		if (!handle) {
> -			handle = ocfs2_zero_start_ordered_transaction(inode);
> +			handle = ocfs2_zero_start_ordered_transaction(inode,
> +								      di_bh);
>  			if (IS_ERR(handle)) {
>  				ret = PTR_ERR(handle);
>  				handle = NULL;
> @@ -823,8 +833,22 @@ static int ocfs2_write_zero_page(struct inode *inode, u64 abs_from,
>  			ret = 0;
>  	}
>  
> -	if (handle)
> +	if (handle) {
> +		/*
> +		 * fs-writeback will release the dirty pages without page lock
> +		 * whose offset are over inode size, the release happens at
> +		 * block_write_full_page_endio().
> +		 */
> +		i_size_write(inode, abs_to);
> +		inode->i_blocks = ocfs2_inode_sector_count(inode);
> +		di->i_size = cpu_to_le64((u64)i_size_read(inode));
> +		inode->i_mtime = inode->i_ctime = CURRENT_TIME;
> +		di->i_mtime = di->i_ctime = cpu_to_le64(inode->i_mtime.tv_sec);
> +		di->i_ctime_nsec = cpu_to_le32(inode->i_mtime.tv_nsec);
> +		di->i_mtime_nsec = di->i_ctime_nsec;
> +		ocfs2_journal_dirty(handle, di_bh);
>  		ocfs2_commit_trans(OCFS2_SB(inode->i_sb), handle);
> +	}
>  
>  out_unlock:
>  	unlock_page(page);
> @@ -920,7 +944,7 @@ out:
>   * has made sure that the entire range needs zeroing.
>   */
>  static int ocfs2_zero_extend_range(struct inode *inode, u64 range_start,
> -				   u64 range_end)
> +				   u64 range_end, struct buffer_head *di_bh)
>  {
>  	int rc = 0;
>  	u64 next_pos;
> @@ -936,7 +960,7 @@ static int ocfs2_zero_extend_range(struct inode *inode, u64 range_start,
>  		next_pos = (zero_pos & PAGE_CACHE_MASK) + PAGE_CACHE_SIZE;
>  		if (next_pos > range_end)
>  			next_pos = range_end;
> -		rc = ocfs2_write_zero_page(inode, zero_pos, next_pos);
> +		rc = ocfs2_write_zero_page(inode, zero_pos, next_pos, di_bh);
>  		if (rc < 0) {
>  			mlog_errno(rc);
>  			break;
> @@ -982,7 +1006,7 @@ int ocfs2_zero_extend(struct inode *inode, struct buffer_head *di_bh,
>  			range_end = zero_to_size;
>  
>  		ret = ocfs2_zero_extend_range(inode, range_start,
> -					      range_end);
> +					      range_end, di_bh);
>  		if (ret) {
>  			mlog_errno(ret);
>  			break;