From: Xue jiufei <xuejiufei@huawei.com>
To: ocfs2-devel@oss.oracle.com
Subject: [Ocfs2-devel] A deadlock when system do not has sufficient memory
Date: Fri, 29 Aug 2014 15:22:11 +0800 [thread overview]
Message-ID: <54002A23.6050708@huawei.com> (raw)
In-Reply-To: <53FFF2FB.20706@oracle.com>
On 2014/8/29 11:26, Junxiao Bi wrote:
> On 08/28/2014 04:16 PM, Xue jiufei wrote:
>> Hi Junxiao,
>> On 2014/8/25 9:50, Junxiao Bi wrote:
>>> Hi Jiufei,
>>>
>>> Maybe you can consider using PF_FSTRANS flag, set this flag before
>>> allocating memory with GFP_KERNEL flag and unset after the allocation.
>>> Checking this flag in ocfs2 when trying to free some pages during memory
>>> direct reclaim. See an example from upstream commit
>>> 5cf02d09b50b1ee1c2d536c9cf64af5a7d433f56 (nfs: skip commit in
>>> releasepage if we're freeing memory for fs-related reasons) .
>>>
>>> Thanks,
>>> Junxiao.
>>>
>> Thank you very much for your suggestion. But in our situation,
>> o2net_wq is evicting inode during memory direct reclaim, which cannot
>> return error or do nothing because vfs would destroy_inode after evict,
>> but we haven't drop inode lock yet.
> How about checking the flag in vfs like this? And you can set PF_FSTRANS
> flag in o2net_wq context where GFP_NOFS flag can't be set.
>
>
> commit 8d27fdec5ce234d2f02e4582d340d231396b92af
> Author: Junxiao Bi <junxiao.bi@oracle.com>
> Date: Fri Aug 29 11:05:25 2014 +0800
>
> super: stop shrinker for processes with PF_FSTRANS flag
>
> For some cluster fs, like ocfs2, it may be impossible to
> set GFP_NOFS for some memory allocation, as the allocation
> is in network common code, like sock_alloc() and in this
> case, the shrinker will call back into the fs and cause
> deadlock when available memory is not enough.
>
> Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
>
> diff --git a/fs/super.c b/fs/super.c
> index b9a214d..c4a8dc1 100644
> --- a/fs/super.c
> +++ b/fs/super.c
> @@ -71,6 +71,9 @@ static unsigned long super_cache_scan(struct shrinker
> *shrink,
> if (!(sc->gfp_mask & __GFP_FS))
> return SHRINK_STOP;
>
> + if (current->flags & PF_FSTRANS)
> + return SHRINK_STOP;
> +
> if (!grab_super_passive(sb))
> return SHRINK_STOP;
>
>
> Thanks,
> Junxiao.
>
Yes, this patch can resolve our problem. Thanks a lot.
Have you send this patch to fs-devel list?
>>
>> Thanks
>> Xuejiufei
>>
>>> On 08/22/2014 04:30 PM, Xue jiufei wrote:
>>>> On 2014/8/20 11:57, Xue jiufei wrote:
>>>>> Hi all,
>>>>> We found there may exist a deadlock when system has not sufficient
>>>>> memory. Here's the situation:
>>>>> N1 N2
>>>>> send message to N1
>>>>> o2net_wq(kworker)
>>>>> receiving message and call corresponding
>>>>> handler to handle this message. It may
>>>>> need to alloc some memory(use GFP_NOFS or GFP_KERNEL).
>>>>> but there's no sufficient memory, lower then
>>>>> min watermark. So it wakeup kswapd to reclaim memory
>>>>> and itself may also call
>>>>> __alloc_pages_direct_reclaim(), trying to
>>>>> free some pages.
>>>>>
>>>>> It tries to free ocfs2 inode
>>>>> cache and calls ocfs2_drop_lock()->dlmunlock()
>>>>> to drop inode lock, sending unlock message to master,
>>>>> say N2. When reply comes, queue sc_rx_work and
>>>>> wait o2net_wq to handle this work. however
>>>>> o2net_wq is still handling last message, so can not
>>>>> process the reply message. It will wait
>>>>> o2net_nsw_completed() in o2net_send_message_vec()
>>>>> forever.
>>>>> Kswapd thread enconter the same situation.
>>>>>
>>>>>
>>>>> So is there any advice to solve this deadlock?
>>>>> And what is the probability that kmalloc return ENOMEM when use GFP_ATOMIC flag?
>>>>>
>>>>> Thanks.
>>>>>
>>>> To avoid this deadlock, we want to alloc memory with flag GFP_ATOMIC
>>>> in all handlers and return ENOMEM to peer when failed. The peer will
>>>> try to resend the message again, o2net_wq can handle other messages.
>>>> However, it can not solve all problems. For example, if o2net_wq is
>>>> processing sc_connect_work which would call sock_alloc_inode() to alloc
>>>> socket_alloc with GFP_KERNEL flag when memory is insufficient and enter
>>>> reclaim progress, it also trigger the deadlock. We can not change this
>>>> alloc flag.
>>>> We have no idea about it. Is there any better ideas.
>>>> Thanks very much.
>>>> xuejiufei
>>>>> _______________________________________________
>>>>> Ocfs2-devel mailing list
>>>>> Ocfs2-devel at oss.oracle.com
>>>>> https://oss.oracle.com/mailman/listinfo/ocfs2-devel
>>>>>
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Ocfs2-devel mailing list
>>>> Ocfs2-devel at oss.oracle.com
>>>> https://oss.oracle.com/mailman/listinfo/ocfs2-devel
>>>>
>>>
>>> .
>>>
>>
>>
>
> .
>
next prev parent reply other threads:[~2014-08-29 7:22 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-20 3:57 [Ocfs2-devel] A deadlock when system do not has sufficient memory Xue jiufei
2014-08-22 8:30 ` Xue jiufei
2014-08-22 17:08 ` Sunil Mushran
2014-08-25 2:05 ` Xue jiufei
2014-08-25 5:00 ` Sunil Mushran
2014-08-25 5:41 ` Joseph Qi
2014-08-25 5:45 ` Sunil Mushran
2014-08-25 6:05 ` Joseph Qi
2014-08-25 17:13 ` Sunil Mushran
2014-08-27 1:57 ` Xue jiufei
2014-08-28 1:16 ` Sunil Mushran
2014-08-25 1:50 ` Junxiao Bi
2014-08-28 8:16 ` Xue jiufei
2014-08-29 3:26 ` Junxiao Bi
2014-08-29 7:22 ` Xue jiufei [this message]
2014-08-29 7:30 ` Junxiao Bi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54002A23.6050708@huawei.com \
--to=xuejiufei@huawei.com \
--cc=ocfs2-devel@oss.oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox