[PATCH v2 net-next 0/2] nfc: s3fwrn5: Change I2C interrupt trigger to EDGE_RISING

[Bongsu Jeon <bongsu.jeon2@gmail.com>]

[-- Attachment #1: Type: text/plain, Size: 885 bytes --]

From: Bongsu Jeon <bongsu.jeon@samsung.com>

For stable Samsung's I2C interrupt handling, I changed the interrupt 
trigger from IRQ_TYPE_LEVEL_HIGH to IRQ_TYPE_EDGE_RISING and removed 
the hard coded interrupt trigger type in the i2c module for the flexible 
control.

1/2 is the changed dt binding for the edge rising trigger.
2/2 is to remove the hard coded interrupt trigger type in the i2c module.

ChangeLog:
 v2:
  2/2
   - remove the hard coded interrupt trigger type.

Bongsu Jeon (2):
  dt-bindings: net: nfc: s3fwrn5: Change I2C interrupt trigger to
    EDGE_RISING
  nfc: s3fwrn5: Remove hard coded interrupt trigger type from the i2c
    module

 .../devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml      | 2 +-
 drivers/nfc/s3fwrn5/i2c.c                                 | 8 +++++++-
 2 files changed, 8 insertions(+), 2 deletions(-)

-- 
2.17.1