From mboxrd@z Thu Jan  1 00:00:00 1970
Content-Type: multipart/mixed; boundary="===============0384252831690659275=="
MIME-Version: 1.0
From: Marcel Holtmann <marcel@holtmann.org>
Subject: Re: ppp0 interface is not configured
Date: Tue, 17 Aug 2010 18:45:30 +0200
Message-ID: <1282063530.23399.123.camel@localhost.localdomain>
In-Reply-To: <4C6ABB09.9000307@mayer-electronics.de>
List-Id: <ofono.ofono.org>
To: ofono@ofono.org

--===============0384252831690659275==
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: quoted-printable

Hi Florian,

> we currently test the PPP dialup with a Huawei EM770W modem. We can =

> connect with create-context and activate context but the ppp device is =

> not configured. connman says that the device is not connected. We use =

> connman 0.55 and ofono 0.26.
> What did we do wrong? The kernel is 2.6.35~pre5 from Meego 1.1 devel.

I never tested this with the EM777W modem, but with the Huawei modems I
have it works just fine.

Especially if it shows the DataConnectionManager interface since then
you have this properly setup and running.

>     [ org.ofono.DataConnectionManager ]
>         Powered =3D 1
>         Attached =3D 1
>         PrimaryContexts =3D /huawei0/primarycontext1
>         RoamingAllowed =3D 1
>     [ org.ofono.NetworkRegistration ]
>         Status =3D registered
>         Strength =3D 70
>         Name =3D T-Mobile D
>         Operators =3D /huawei0/operator/26201
>         LocationAreaCode =3D 34591
>         Mode =3D auto
>         MobileCountryCode =3D 262
>         CellId =3D 5950877
>         MobileNetworkCode =3D 01

> # /usr/lib/ofono/test/list-contexts
> [ /huawei0 ]
>     [ /huawei0/primarycontext1 ]
>         Username =3D
>         Protocol =3D ip
>         Name =3D 3G Connection
>         Settings =3D { Interface=3Dppp0 Netmask=3D255.255.255.255 =

> Method=3Dstatic DomainNameServers=3D193.254.160.1,10.74.83.22, =

> Address=3D88.128.36.75 }
>         Active =3D 1
>         AccessPointName =3D internet.t-d1.de
>         Password =3D
>         Type =3D internet

This looks like an active Internet context. How did you activate this
one. Via ConnMan or via activate-context test script. If via the script,
then I think that ConnMan is not picking this up. I think that is a bug
in ConnMan.

What does list-services from ConnMan says? The devices and networks are
actually irrelevant.

Regards

Marcel



--===============0384252831690659275==--