Open Source Telephony
 help / color / mirror / Atom feed
From: Philippe Nunes <philippe.nunes@linux.intel.com>
To: ofono@ofono.org
Subject: [PATCH v4 5/8] stk: Use Gprs private APIs to handle the Open	channel/Close Channel
Date: Fri, 20 May 2011 18:26:18 +0200	[thread overview]
Message-ID: <1305908781-8322-5-git-send-email-philippe.nunes@linux.intel.com> (raw)
In-Reply-To: <1305908781-8322-1-git-send-email-philippe.nunes@linux.intel.com>

[-- Attachment #1: Type: text/plain, Size: 7975 bytes --]

---
 src/stk.c |  198 +++++++++++++++++++++++++++++++++++++++++++++++++++++-------
 1 files changed, 175 insertions(+), 23 deletions(-)

diff --git a/src/stk.c b/src/stk.c
index fb376a6..d9f1e25 100644
--- a/src/stk.c
+++ b/src/stk.c
@@ -28,6 +28,7 @@
 #include <stdio.h>
 #include <stdlib.h>
 #include <stdint.h>
+#include <arpa/inet.h>
 
 #include <glib.h>
 #include <gdbus.h>
@@ -85,6 +86,7 @@ struct ofono_stk {
 	struct stk_channel_data tx_buffer;
 	gboolean link_on_demand;
 	struct ofono_gprs *gprs;
+	struct stk_bearer_description bearer_desc;
 };
 
 struct envelope_op {
@@ -487,27 +489,57 @@ static void emit_menu_changed(struct ofono_stk *stk)
 	g_dbus_send_message(conn, signal);
 }
 
-static void stk_close_channel(struct ofono_stk *stk)
+static void ofono_stk_remove_pdp_context_cb(int error, void *data)
 {
-	/*
-	 * TODO
-	 * Deactivate and remove PDP context
-	 * Send the Terminal Response once the PDP context is deactivated
-	 */
+	struct ofono_stk *stk = data;
 
-	/* Temporary implementation */
+	DBG("");
+
+	stk->channel.status = STK_CHANNEL_PACKET_DATA_SERVICE_NOT_ACTIVATED;
+
+	if (stk->pending_cmd && stk->pending_cmd->type ==
+			STK_COMMAND_TYPE_CLOSE_CHANNEL) {
+		if (error < 0)
+			send_simple_response(stk, STK_RESULT_TYPE_NOT_CAPABLE);
+		else
+			send_simple_response(stk, STK_RESULT_TYPE_SUCCESS);
+	} else {
+		/*
+		 * TODO
+		 * Send Event channel status
+		 */
+	}
+
+	/* free the buffers even in case of error */
 	g_free(stk->rx_buffer.data.array);
 	g_free(stk->tx_buffer.data.array);
 	stk->rx_buffer.data.array = NULL;
 	stk->tx_buffer.data.array = NULL;
 
 	stk->channel.id = 0;
-	stk->channel.status = STK_CHANNEL_PACKET_DATA_SERVICE_NOT_ACTIVATED;
+}
+
+static void stk_close_channel(struct ofono_stk *stk)
+{
+	int err;
+
+	err = __ofono_gprs_remove_pdp_context(stk->gprs, stk->channel.id,
+			ofono_stk_remove_pdp_context_cb, stk);
 
-	if (stk->pending_cmd &&
-			stk->pending_cmd->type ==
+	if (err == 0) {
+		g_free(stk->rx_buffer.data.array);
+		g_free(stk->tx_buffer.data.array);
+		stk->rx_buffer.data.array = NULL;
+		stk->tx_buffer.data.array = NULL;
+
+		stk->channel.id = 0;
+		stk->channel.status =
+				STK_CHANNEL_PACKET_DATA_SERVICE_NOT_ACTIVATED;
+
+		if (stk->pending_cmd && stk->pending_cmd->type ==
 				STK_COMMAND_TYPE_CLOSE_CHANNEL)
-		send_simple_response(stk, STK_RESULT_TYPE_SUCCESS);
+			send_simple_response(stk, STK_RESULT_TYPE_SUCCESS);
+	}
 }
 
 static void user_termination_cb(enum stk_agent_result result, void *user_data)
@@ -554,12 +586,66 @@ static void stk_alpha_id_unset(struct ofono_stk *stk)
 	stk_agent_request_cancel(stk->current_agent);
 }
 
+static void ofono_stk_activate_pdp_context_cb(int error, const char *interface,
+						const char *ip,
+						void *data)
+{
+	struct ofono_stk *stk = data;
+	struct stk_response rsp;
+	struct ofono_error failure = { .type = OFONO_ERROR_TYPE_FAILURE };
+
+	DBG("");
+
+	memset(&rsp, 0, sizeof(rsp));
+
+	if (error < 0) {
+		rsp.result.type = STK_RESULT_TYPE_NOT_CAPABLE;
+		goto out;
+	} else {
+		DBG("Interface %s, IP = %s", interface, ip);
+		stk->channel.status = STK_CHANNEL_PACKET_DATA_SERVICE_ACTIVATED;
+	}
+
+	if (stk->pending_cmd == NULL) {
+		/*
+		 * TODO
+		 * Send Event channel status
+		 */
+		return;
+	}
+
+	if (stk->pending_cmd->type == STK_COMMAND_TYPE_OPEN_CHANNEL) {
+		rsp.open_channel.channel.id = stk->channel.id;
+		rsp.open_channel.channel.status = stk->channel.status;
+		rsp.open_channel.buf_size = stk->rx_buffer.data.len;
+		memcpy(&rsp.open_channel.bearer_desc, &stk->bearer_desc,
+				sizeof(struct stk_bearer_description));
+	} else if (stk->pending_cmd->type == STK_COMMAND_TYPE_SEND_DATA &&
+			stk->link_on_demand) {
+		/*
+		 * TODO
+		 * send the data immediately, flush the tx buffer
+		 */
+
+		rsp.send_data.tx_avail = stk->tx_buffer.tx_avail;
+	}
+
+out:
+	if (stk_respond(stk, &rsp, stk_command_cb))
+		stk_command_cb(&failure, stk);
+
+	if (error < 0)
+		stk_close_channel(stk);
+}
 
 static void stk_open_channel(struct ofono_stk *stk)
 {
 	const struct stk_command_open_channel *oc;
 	struct stk_response rsp;
 	struct ofono_error failure = { .type = OFONO_ERROR_TYPE_FAILURE };
+	char *host = NULL;
+	unsigned int id;
+	int err;
 
 	if (stk->pending_cmd == NULL ||
 		stk->pending_cmd->type != STK_COMMAND_TYPE_OPEN_CHANNEL)
@@ -570,6 +656,37 @@ static void stk_open_channel(struct ofono_stk *stk)
 	memset(&rsp, 0, sizeof(rsp));
 	rsp.result.type = STK_RESULT_TYPE_SUCCESS;
 
+	if (oc->data_dest_addr.type == STK_ADDRESS_IPV4) {
+		struct in_addr addr;
+
+		host = g_try_malloc0(INET_ADDRSTRLEN);
+		memset(host, 0, sizeof(host));
+		addr.s_addr = oc->data_dest_addr.addr.ipv4;
+		inet_ntop(AF_INET, &addr, host, INET_ADDRSTRLEN);
+	} else {
+		/*
+		 * For now, only the bearer type "GPRS / UTRAN packet service /
+		 * E-UTRAN" is supported.
+		 * For such bearer, according 3GPP TS 31.111, the packet data
+		 * protocol type is IP, so only IPv4 addresses are considered.
+		 */
+		rsp.result.type = STK_RESULT_TYPE_NOT_CAPABLE;
+		goto out;
+	}
+
+	id = __ofono_gprs_add_pdp_context(stk->gprs,
+					OFONO_GPRS_CONTEXT_TYPE_STK,
+					OFONO_GPRS_PROTO_IP, oc->apn,
+					oc->text_usr, oc->text_passwd, host);
+
+	if (id == 0) {
+		rsp.result.type = STK_RESULT_TYPE_NOT_CAPABLE;
+		goto out;
+	}
+
+	stk->channel.id = id;
+	ofono_info("Channel %d", id);
+
 	stk->rx_buffer.data.array = g_try_malloc(oc->buf_size);
 	if (stk->rx_buffer.data.array == NULL) {
 		unsigned char no_cause_result[] = { 0x00 };
@@ -592,16 +709,44 @@ static void stk_open_channel(struct ofono_stk *stk)
 	stk->rx_buffer.rx_remaining = 0;
 	stk->tx_buffer.data.len = oc->buf_size;
 	stk->tx_buffer.tx_avail = oc->buf_size;
+
+	memcpy(&stk->bearer_desc, &oc->bearer_desc,
+					sizeof(struct stk_bearer_description));
 	stk->link_on_demand = (stk->pending_cmd->qualifier &
 				STK_OPEN_CHANNEL_FLAG_IMMEDIATE) ? FALSE : TRUE;
 
-	/*
-	 * TODO
-	 * Add a new primary PDP context based on the provided settings
-	 * Send the Terminal Response or wait until the PDP context is activated
-	 * in case of immediate link establishment not in background.
-	 */
+	if (stk->link_on_demand) {
+		rsp.open_channel.channel.id = id;
+		rsp.open_channel.channel.status =
+				STK_CHANNEL_PACKET_DATA_SERVICE_NOT_ACTIVATED;
+		rsp.open_channel.buf_size = oc->buf_size;
+		goto out;
+	}
+
+	err = __ofono_gprs_activate_pdp_context(stk->gprs, id,
+					ofono_stk_activate_pdp_context_cb, stk);
+
+	if (err < 0) {
+		rsp.result.type = STK_RESULT_TYPE_NOT_CAPABLE;
+		goto out;
+	}
+
+	/* In background mode, send the terminal response now */
+	if (stk->pending_cmd->qualifier & STK_OPEN_CHANNEL_FLAG_BACKGROUND) {
+		rsp.open_channel.channel.id = id;
+		rsp.open_channel.channel.status =
+				STK_CHANNEL_PACKET_DATA_SERVICE_NOT_ACTIVATED;
+		rsp.open_channel.buf_size = oc->buf_size;
+		goto out;
+	}
+
+	g_free(host);
+	/* wait for the PDP context activation to send the Terminal Response */
+	return;
+
 out:
+	g_free(host);
+
 	if (stk_respond(stk, &rsp, stk_command_cb))
 		stk_command_cb(&failure, stk);
 
@@ -641,12 +786,19 @@ static void stk_send_data(struct ofono_stk *stk,
 
 	if (stk->channel.status == STK_CHANNEL_PACKET_DATA_SERVICE_NOT_ACTIVATED
 			&& stk->link_on_demand == TRUE) {
-		/*
-		 * TODO
-		 * activate the context, update the channel status
-		 * once the context is activated, send the data immediately
-		 * and flush the tx buffer
-		 */
+		int err;
+
+		err = __ofono_gprs_activate_pdp_context(stk->gprs,
+					stk->channel.id,
+					ofono_stk_activate_pdp_context_cb,
+					stk);
+
+		if (err < 0) {
+			rsp.result.type = STK_RESULT_TYPE_NOT_CAPABLE;
+			goto out;
+		}
+
+		return;
 	} else {
 		/*
 		 * TODO
-- 
1.7.1


  parent reply	other threads:[~2011-05-20 16:26 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-05-20 16:26 [PATCH v4 1/8] stk: Clear 'respond_on_exit' flag after sending the terminal response Philippe Nunes
2011-05-20 16:26 ` [PATCH v4 2/8] stk: Introduce BIP command handlers Philippe Nunes
2011-06-02  0:28   ` Denis Kenzior
2011-06-10 14:03     ` Philippe Nunes
2011-06-08  8:01       ` Denis Kenzior
2011-05-20 16:26 ` [PATCH v4 3/8] gprs: Add 'stk' gprs context type Philippe Nunes
2011-06-01  5:30   ` Denis Kenzior
2011-05-20 16:26 ` [PATCH v4 4/8] gprs: Add private APIs for adding/activating/removing hidden PDP contexts Philippe Nunes
2011-06-01  6:18   ` Denis Kenzior
2011-06-10  9:44     ` Philippe Nunes
2011-06-08  7:46       ` Denis Kenzior
2011-05-20 16:26 ` Philippe Nunes [this message]
2011-05-20 16:26 ` [PATCH v4 6/8] gprs: Add a host route for STK context type Philippe Nunes
2011-06-01  6:26   ` Denis Kenzior
2011-05-20 16:26 ` [PATCH v4 7/8] stk: Add support of the Setup event list proactive command Philippe Nunes
2011-05-20 16:26 ` [PATCH v4 8/8] stk: Add read/write handlers Philippe Nunes
2011-06-01  5:26 ` [PATCH v4 1/8] stk: Clear 'respond_on_exit' flag after sending the terminal response Denis Kenzior

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1305908781-8322-5-git-send-email-philippe.nunes@linux.intel.com \
    --to=philippe.nunes@linux.intel.com \
    --cc=ofono@ofono.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox