From: Philippe Nunes <philippe.nunes@linux.intel.com>
To: ofono@ofono.org
Subject: [PATCH] phonesim: Extend STK menu for BIP commands sanity testing
Date: Mon, 04 Jul 2011 18:26:00 +0200 [thread overview]
Message-ID: <1309796760-27584-1-git-send-email-philippe.nunes@linux.intel.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 7490 bytes --]
For sanity testing regarding the BIP commands, the BIP menu is enriched with the Open channel TCP and Open channel UDP items.
For both, the destination adress is set as the locahost port '12348'
With a TCP/UDP server listen to this destination address (like netcat), it's possible to check the connection (for TCP) and the data exchange (sending/receiving).
---
src/simapplication.cpp | 126 +++++++++++++++++++++++++++++++++++++++---------
1 files changed, 103 insertions(+), 23 deletions(-)
diff --git a/src/simapplication.cpp b/src/simapplication.cpp
index 119d7b2..f098b8a 100644
--- a/src/simapplication.cpp
+++ b/src/simapplication.cpp
@@ -350,11 +350,13 @@ const QString DemoSimApplication::getName()
#define LocalInfoMenu_Time 1
#define LocalInfoMenu_Lang 2
-#define BIPMenu_OpenChannel 1
-#define BIPMenu_CloseChannel 2
-#define BIPMenu_ReceiveData 3
-#define BIPMenu_SendData 4
-#define BIPMenu_GetChannelStatus 5
+#define BIPMenu_OpenChannel_TCP 1
+#define BIPMenu_OpenChannel_UDP 2
+#define BIPMenu_CloseChannel 3
+#define BIPMenu_ReceiveData 4
+#define BIPMenu_SendData_Immediately 5
+#define BIPMenu_SendData_Store 6
+#define BIPMenu_GetChannelStatus 7
enum SendSMSMenuItems {
SendSMS_Unpacked = 1,
@@ -2377,7 +2379,7 @@ void DemoSimApplication::BIPMenu( const QSimTerminalResponse& resp )
if ( resp.result() == QSimTerminalResponse::Success ) {
switch ( resp.menuItem() ) {
- case BIPMenu_OpenChannel:
+ case BIPMenu_OpenChannel_TCP:
{
QByteArray bearerDesc;
QByteArray uti;
@@ -2392,14 +2394,64 @@ void DemoSimApplication::BIPMenu( const QSimTerminalResponse& resp )
bearerDesc += 0x1F;
bearerDesc += 0x02;
- uti += 0x01;
- uti += 0xAD;
- uti += 0x9C;
+ uti += 0x02; /* TCP, UICC in client mode, remote connection */
+ uti += 0x30;
+ uti += 0x3C; /* port 12348 */
destAddress += 0x21;
+ destAddress += 0x7F; /* local host 127.0.0.1 */
+ destAddress += (char) 0x00;
+ destAddress += (char) 0x00;
destAddress += 0x01;
- destAddress += 0x01;
- destAddress += 0x01;
+
+ apn += 0x06;
+ apn += 0x54;
+ apn += 0x65;
+ apn += 0x73;
+ apn += 0x74;
+ apn += 0x47;
+ apn += 0x70;
+ apn += 0x02;
+ apn += 0x72;
+ apn += 0x73;
+
+ cmd.setType( QSimCommand::OpenChannel );
+ cmd.setQualifier( QSimCommand::OpenChannelImmediate );
+ cmd.setText("Open channel TCP");
+ cmd.setBearerDesc(bearerDesc);
+ cmd.setBufferSize(1400);
+ cmd.setApn(apn);
+ cmd.setUserLogin("UserLog");
+ cmd.setUserPassword("UserPwd");
+ cmd.setUti(uti);
+ cmd.setDestAddress(destAddress);
+ command( cmd, this, SLOT(sendBIPMenu()) );
+ }
+ break;
+
+ case BIPMenu_OpenChannel_UDP:
+ {
+ QByteArray bearerDesc;
+ QByteArray uti;
+ QByteArray destAddress;
+ QByteArray apn;
+
+ bearerDesc += 0x02;
+ bearerDesc += 0x03;
+ bearerDesc += 0x04;
+ bearerDesc += 0x03;
+ bearerDesc += 0x04;
+ bearerDesc += 0x1F;
+ bearerDesc += 0x02;
+
+ uti += 0x01; /* UDP, UICC in client mode, remote connection */
+ uti += 0x30;
+ uti += 0x3C; /* port 12348 */
+
+ destAddress += 0x21;
+ destAddress += 0x7F; /* local host 127.0.0.1 */
+ destAddress += (char) 0x00;
+ destAddress += (char) 0x00;
destAddress += 0x01;
apn += 0x06;
@@ -2415,7 +2467,7 @@ void DemoSimApplication::BIPMenu( const QSimTerminalResponse& resp )
cmd.setType( QSimCommand::OpenChannel );
cmd.setQualifier( QSimCommand::OpenChannelImmediate );
- cmd.setText("Open ID");
+ cmd.setText("Open channel UDP");
cmd.setBearerDesc(bearerDesc);
cmd.setBufferSize(1400);
cmd.setApn(apn);
@@ -2437,19 +2489,39 @@ void DemoSimApplication::BIPMenu( const QSimTerminalResponse& resp )
}
break;
- case BIPMenu_SendData:
+ case BIPMenu_SendData_Immediately:
{
QByteArray data;
- data += 0x01;
- data += 0x02;
- data += 0x03;
- data += 0x04;
- data += 0x05;
+ data += 0x61;
+ data += 0x62;
+ data += 0x63;
+ data += 0x64;
+ data += 0x65;
+ cmd.setQualifier( QSimCommand::SendDataImmediately );
cmd.setType( QSimCommand::SendData );
cmd.setDestinationDevice( QSimCommand::Channel1 );
- cmd.setText("Send Data 1");
+ cmd.setText("Send Data Immediately");
+ cmd.addExtensionField( 0x36, data );
+ command( cmd, this, SLOT(sendBIPMenu()) );
+ }
+ break;
+
+ case BIPMenu_SendData_Store:
+ {
+ QByteArray data;
+
+ data += 0x31;
+ data += 0x32;
+ data += 0x33;
+ data += 0x34;
+ data += 0x35;
+
+ cmd.setQualifier( QSimCommand::SendDataStoreData );
+ cmd.setType( QSimCommand::SendData );
+ cmd.setDestinationDevice( QSimCommand::Channel1 );
+ cmd.setText("Store Data");
cmd.addExtensionField( 0x36, data );
command( cmd, this, SLOT(sendBIPMenu()) );
}
@@ -2489,8 +2561,12 @@ void DemoSimApplication::sendBIPMenu()
cmd.setType( QSimCommand::SelectItem );
cmd.setTitle( "BIP commands Menu" );
- item.setIdentifier( BIPMenu_OpenChannel );
- item.setLabel( "Open channel" );
+ item.setIdentifier( BIPMenu_OpenChannel_TCP );
+ item.setLabel( "Open channel - TCP in client mode" );
+ items += item;
+
+ item.setIdentifier( BIPMenu_OpenChannel_UDP );
+ item.setLabel( "Open channel - UDP in client mode" );
items += item;
item.setIdentifier( BIPMenu_CloseChannel );
@@ -2501,8 +2577,12 @@ void DemoSimApplication::sendBIPMenu()
item.setLabel( "Receive data" );
items += item;
- item.setIdentifier( BIPMenu_SendData );
- item.setLabel( "Send data" );
+ item.setIdentifier( BIPMenu_SendData_Immediately );
+ item.setLabel( "Send data - Immediately" );
+ items += item;
+
+ item.setIdentifier( BIPMenu_SendData_Store );
+ item.setLabel( "Send data - Store" );
items += item;
item.setIdentifier( BIPMenu_GetChannelStatus );
--
1.7.1
next reply other threads:[~2011-07-04 16:26 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-04 16:26 Philippe Nunes [this message]
2011-07-08 19:42 ` [PATCH] phonesim: Extend STK menu for BIP commands sanity testing Denis Kenzior
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1309796760-27584-1-git-send-email-philippe.nunes@linux.intel.com \
--to=philippe.nunes@linux.intel.com \
--cc=ofono@ofono.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox