From mboxrd@z Thu Jan  1 00:00:00 1970
Content-Type: multipart/mixed; boundary="===============0075126588034618901=="
MIME-Version: 1.0
From: Marcel Holtmann <marcel@holtmann.org>
Subject: Re: Some experiments with the SIMCOM SIM5216E modem on a ARM926 board
Date: Fri, 13 Jan 2012 04:57:24 +0100
Message-ID: <1326427044.6454.256.camel@aeonflux>
In-Reply-To: <4F0FA2D2.9000601@eclis.ch>
List-Id: <ofono.ofono.org>
To: ofono@ofono.org

--===============0075126588034618901==
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: quoted-printable

Hi Jean-Christian,

> > T: Bus=3D01 Lev=3D01 Prnt=3D01 Port=3D00 Cnt=3D01 Dev#=3D 3 Spd=3D12 Mx=
Ch=3D 0
> > D: Ver=3D 2.00 Cls=3D00(>ifc ) Sub=3D00 Prot=3D00 MxPS=3D64 #Cfgs=3D 1
> > P: Vendor=3D05c6 ProdID=3D9000 Rev=3D 0.00
> > S: Manufacturer=3DSimTech, Incorporated
> > S: Product=3DSimTech SIM5216
> > C:* #Ifs=3D 5 Cfg#=3D 1 Atr=3De0 MxPwr=3D500mA
> > I:* If#=3D 0 Alt=3D 0 #EPs=3D 2 Cls=3Dff(vend.) Sub=3Dff Prot=3Dff Driv=
er=3Doption
> > E: Ad=3D81(I) Atr=3D02(Bulk) MxPS=3D 64 Ivl=3D0ms
> > E: Ad=3D01(O) Atr=3D02(Bulk) MxPS=3D 64 Ivl=3D0ms
> > I:* If#=3D 1 Alt=3D 0 #EPs=3D 2 Cls=3Dff(vend.) Sub=3Dff Prot=3Dff Driv=
er=3Doption
> > E: Ad=3D82(I) Atr=3D02(Bulk) MxPS=3D 64 Ivl=3D0ms
> > E: Ad=3D02(O) Atr=3D02(Bulk) MxPS=3D 64 Ivl=3D0ms
> > I:* If#=3D 2 Alt=3D 0 #EPs=3D 2 Cls=3Dff(vend.) Sub=3Dff Prot=3Dff Driv=
er=3Doption
> > E: Ad=3D83(I) Atr=3D02(Bulk) MxPS=3D 64 Ivl=3D0ms
> > E: Ad=3D03(O) Atr=3D02(Bulk) MxPS=3D 64 Ivl=3D0ms
> > I:* If#=3D 3 Alt=3D 0 #EPs=3D 3 Cls=3Dff(vend.) Sub=3Dff Prot=3Dff Driv=
er=3Doption
> > E: Ad=3D84(I) Atr=3D03(Int.) MxPS=3D 64 Ivl=3D5ms
> > E: Ad=3D85(I) Atr=3D02(Bulk) MxPS=3D 64 Ivl=3D0ms
> > E: Ad=3D04(O) Atr=3D02(Bulk) MxPS=3D 64 Ivl=3D0ms
> > I:* If#=3D 4 Alt=3D 0 #EPs=3D 3 Cls=3Dff(vend.) Sub=3Dff Prot=3Dff Driv=
er=3Doption
> > E: Ad=3D86(I) Atr=3D03(Int.) MxPS=3D 64 Ivl=3D5ms
> > E: Ad=3D87(I) Atr=3D02(Bulk) MxPS=3D 64 Ivl=3D0ms
> > E: Ad=3D05(O) Atr=3D02(Bulk) MxPS=3D 64 Ivl=3D0ms
> =

> I didn't noticed that SIMCOM responded to my request while I edited my =

> last mail. Here is the interface usage according to them:
> =

> the USB interface index is:
> 0-       DIAG
> 1-       NMEA
> 2-       AT
> 3-       MODEM
> 4-       Ethernet
> So, the port index 2 and port index 3 exposes a working AT command =

> interface.

okay then, run ofonod -n -d '*udev*' and see if you get proper debug
output for your modem. Just pushed a udev patch that does the detection.

Regards

Marcel




--===============0075126588034618901==--