Hi Kristen,

>  	lcp_reset_config_options(lcp);
>  	pppcp_set_local_options(pppcp, lcp->options, lcp->options_len);
> +	ppp_lcp_down_notify(pppcp_get_ppp(pppcp));
>  	ppp_enter_phase(pppcp_get_ppp(pppcp), PPP_PHASE_TERMINATION);
>  }
> 

I fixed this somewhat different by calling down & close on ipcp layer from 
within the termination phase.

Regards,
-Denis