Open Source Telephony
 help / color / mirror / Atom feed
From: Denis Kenzior <denkenz@gmail.com>
To: ofono@ofono.org
Subject: Re: [PATCH 1/2] modem: add Lockdown property to Modem interface
Date: Fri, 17 Dec 2010 18:57:45 -0600	[thread overview]
Message-ID: <4D0C0709.9050305@gmail.com> (raw)
In-Reply-To: <1291413590-22873-1-git-send-email-padovan@profusion.mobi>

[-- Attachment #1: Type: text/plain, Size: 7276 bytes --]

Hi Gustavo,

On 12/03/2010 03:59 PM, Gustavo F. Padovan wrote:
> Setting Lockdown to TRUE means power down the modem and hold a lock that
> only permits the lock's owner power up the modem back. When released
> it restores the last state of the modem before holding the lock.
> ---
>  doc/modem-api.txt |    9 ++++
>  src/modem.c       |  129 +++++++++++++++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 138 insertions(+), 0 deletions(-)

Can you break this up into two patches, one for doc and one for src?

> 
> diff --git a/doc/modem-api.txt b/doc/modem-api.txt
> index b92e53c..45043b0 100644
> --- a/doc/modem-api.txt
> +++ b/doc/modem-api.txt
> @@ -37,6 +37,15 @@ Properties	boolean Powered [readwrite]
>  			Boolean representing the rf state of the modem.
>  			Online is false in flight mode.
>  
> +		boolean Lockdown [readwrite]
> +
> +			Boolean representing the lock state of the modem.
> +			Setting it to true, makes the calling application hold
> +			the modem lock and power it down. Setting to false
> +			makes the it release the modem lock. Only the
> +			application that holds the lock can power up the modem.
> +			If the the application exits Lockdown is set to false.
> +
>  		boolean Emergency [readonly, optional, experimental]
>  
>  			Boolean representing the emergency mode of the
> diff --git a/src/modem.c b/src/modem.c
> index b334b58..a9a6e87 100644
> --- a/src/modem.c
> +++ b/src/modem.c
> @@ -71,6 +71,9 @@ struct ofono_modem {
>  	ofono_bool_t		powered;
>  	ofono_bool_t		powered_pending;
>  	ofono_bool_t		get_online;
> +	ofono_bool_t		lockdown;
> +	char			*lock_owner;
> +	guint			lock_watch;
>  	guint			timeout;
>  	ofono_bool_t		online;
>  	struct ofono_watchlist	*online_watches;
> @@ -583,6 +586,9 @@ void __ofono_modem_append_properties(struct ofono_modem *modem,
>  	ofono_dbus_dict_append(dict, "Powered", DBUS_TYPE_BOOLEAN,
>  				&modem->powered);
>  
> +	ofono_dbus_dict_append(dict, "Lockdown", DBUS_TYPE_BOOLEAN,
> +				&modem->lockdown);
> +
>  	devinfo_atom = __ofono_modem_find_atom(modem, OFONO_ATOM_TYPE_DEVINFO);
>  
>  	/* We cheat a little here and don't check the registered status */
> @@ -686,6 +692,16 @@ static int set_powered(struct ofono_modem *modem, ofono_bool_t powered)
>  	return err;
>  }
>  
> +static void lockdown_remove(struct ofono_modem *modem)
> +{
> +	DBusConnection *conn =ofono_dbus_get_connection();
> +
> +	g_free(modem->lock_owner);
> +	g_dbus_remove_watch(conn, modem->lock_watch);
> +	modem->lock_watch = 0;
> +	modem->lockdown = FALSE;
> +}
> +
>  static gboolean set_powered_timeout(gpointer user)
>  {
>  	struct ofono_modem *modem = user;
> @@ -712,11 +728,107 @@ static gboolean set_powered_timeout(gpointer user)
>  
>  		reply = __ofono_error_timed_out(modem->pending);
>  		__ofono_dbus_pending_reply(&modem->pending, reply);
> +
> +		if (modem->lockdown)
> +			lockdown_remove(modem);
>  	}
>  
>  	return FALSE;
>  }
>  
> +static void lockdown_disconnect(DBusConnection *conn, void *user_data)
> +{
> +	struct ofono_modem *modem = user_data;
> +
> +	DBG("");
> +
> +	g_free(modem->lock_owner);
> +
> +	modem->lockdown = FALSE;
> +
> +	ofono_dbus_signal_property_changed(conn, modem->path,
> +					OFONO_MODEM_INTERFACE,
> +					"Lockdown", DBUS_TYPE_BOOLEAN,
> +					&modem->lockdown);

Should you also be removing the lock_watch here?  Since the lock_watch
is no longer relevant and you'll be leaking it otherwise.

> +}
> +
> +static DBusMessage *set_property_lockdown(struct ofono_modem *modem,
> +					DBusMessage *msg,
> +					DBusMessageIter *var)
> +{
> +	DBusConnection *conn = ofono_dbus_get_connection();
> +	ofono_bool_t lockdown;
> +	const char *caller;
> +	int err;
> +
> +	if (dbus_message_iter_get_arg_type(var) != DBUS_TYPE_BOOLEAN)
> +		return __ofono_error_invalid_args(msg);
> +
> +	dbus_message_iter_get_basic(var, &lockdown);
> +
> +	if (modem->pending != NULL)
> +		return __ofono_error_busy(msg);
> +
> +	if (modem->lockdown == lockdown)
> +		return dbus_message_new_method_return(msg);
> +
> +	caller = dbus_message_get_sender(msg);
> +
> +	if (lockdown) {
> +		dbus_bool_t powered;
> +
> +		modem->lock_owner = g_strdup(caller);
> +
> +		modem->lock_watch = g_dbus_add_service_watch(conn,
> +				modem->lock_owner, NULL,
> +				lockdown_disconnect, modem, NULL);
> +
> +		if (modem->lock_watch == 0) {
> +			g_free(modem->lock_owner);
> +			return __ofono_error_failed(msg);
> +		}
> +
> +		modem->lockdown = lockdown;
> +
> +		if (!modem->powered)
> +			goto done;
> +
> +		err = set_powered(modem, FALSE);
> +		if (err < 0) {
> +			if (err != -EINPROGRESS) {
> +				lockdown_remove(modem);
> +				return __ofono_error_failed(msg);
> +			}
> +
> +			modem->pending = dbus_message_ref(msg);
> +			modem->timeout = g_timeout_add_seconds(20,
> +						set_powered_timeout, modem);
> +			return NULL;
> +		}
> +
> +		powered = FALSE;
> +		ofono_dbus_signal_property_changed(conn, modem->path,
> +					OFONO_MODEM_INTERFACE,
> +					"Powered", DBUS_TYPE_BOOLEAN,
> +					&powered);
> +	} else {
> +		if (g_strcmp0(caller, modem->lock_owner))
> +			return __ofono_error_access_denied(msg);
> +
> +		lockdown_remove(modem);
> +	}
> +
> +done:
> +	g_dbus_send_reply(conn, msg, DBUS_TYPE_INVALID);
> +
> +	ofono_dbus_signal_property_changed(conn, modem->path,
> +					OFONO_MODEM_INTERFACE,
> +					"Lockdown", DBUS_TYPE_BOOLEAN,
> +					&lockdown);
> +
> +	return NULL;
> +}
> +
>  static DBusMessage *modem_set_property(DBusConnection *conn,
>  					DBusMessage *msg, void *data)
>  {
> @@ -759,6 +871,9 @@ static DBusMessage *modem_set_property(DBusConnection *conn,
>  		if (modem->powered == powered)
>  			return dbus_message_new_method_return(msg);
>  
> +		if (modem->lockdown)
> +			return __ofono_error_access_denied(msg);
> +
>  		err = set_powered(modem, powered);
>  		if (err < 0) {
>  			if (err != -EINPROGRESS)
> @@ -790,6 +905,9 @@ static DBusMessage *modem_set_property(DBusConnection *conn,
>  		return NULL;
>  	}
>  
> +	if (g_str_equal(name, "Lockdown"))
> +		return set_property_lockdown(modem, msg, &var);
> +
>  	return __ofono_error_invalid_args(msg);
>  }
>  
> @@ -834,6 +952,12 @@ void ofono_modem_set_powered(struct ofono_modem *modem, ofono_bool_t powered)
>  
>  	modem->powered = powered;
>  
> +	if (modem->lockdown)
> +		ofono_dbus_signal_property_changed(conn, modem->path,
> +					OFONO_MODEM_INTERFACE,
> +					"Lockdown", DBUS_TYPE_BOOLEAN,
> +					&modem->lockdown);
> +
>  	if (modem->driver == NULL) {
>  		ofono_error("Calling ofono_modem_set_powered on a"
>  				"modem with no driver is not valid, "
> @@ -1593,6 +1717,11 @@ static void modem_unregister(struct ofono_modem *modem)
>  		modem->interface_update = 0;
>  	}
>  
> +	if (modem->lock_watch) {
> +		g_dbus_remove_watch(conn, modem->lock_watch);
> +		modem->lock_watch = 0;
> +	}
> +

What about signaling the Lockdown to false, and g_freeing the lock_owner?

>  	g_dbus_unregister_interface(conn, modem->path, OFONO_MODEM_INTERFACE);
>  
>  	if (modem->driver && modem->driver->remove)

Regards,
-Denis

  parent reply	other threads:[~2010-12-18  0:57 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-12-03 21:59 [PATCH 1/2] modem: add Lockdown property to Modem interface Gustavo F. Padovan
2010-12-03 21:59 ` [PATCH 2/2] modem: Add test script for the Lockdown property Gustavo F. Padovan
2010-12-18  0:57 ` Denis Kenzior [this message]
2010-12-22 18:19   ` [PATCH 1/2] modem: add Lockdown property to Modem interface Gustavo F. Padovan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4D0C0709.9050305@gmail.com \
    --to=denkenz@gmail.com \
    --cc=ofono@ofono.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox