From: Daniel Wagner <wagi@monom.org>
To: ofono@ofono.org
Subject: Re: [PATCH v2 00/13] Add support for BlueZ 5 Profile1 API to dundee
Date: Mon, 18 Mar 2013 10:55:53 +0100 [thread overview]
Message-ID: <5146E4A9.8060306@monom.org> (raw)
In-Reply-To: <1363267974-13518-1-git-send-email-paulo.borges@openbossa.org>
[-- Attachment #1: Type: text/plain, Size: 7369 bytes --]
Hi Paulo,
I have tested this version and it seems to work. I say 'seems' because I was not able
keep open the connection. All phones I have tested open the connection and close
them right after. I am not sure if just my setup is broken. Testing against bluez4
gave the same behaviour. So I don't think your patches are causing this.
If Denis or Marcel do not speak up now, I'll apply them (fixing the compile glitch on
on patch #13, no need to resend the series.)
cheers,
daniel
dundee[1081]: dundee/device.c:set_property_active() 0x1e78960 path /device0
dundee[1081]: dundee/bluez5.c:bluetooth_device_connect() /org/bluez/hci0/dev_A0_4E_04_F6_F5_05
dundee[1081]: plugins/bluez5.c:device_send_message() Bluetooth: sending ConnectProfile for 00001103-0000-1000-8000-00805f9b34fb on /org/bluez/hci0/dev_A0_4E_04_F6_F5_05
dundee[1081]: dundee/bluez5.c:profile_new_connection() /org/bluez/hci0/dev_A0_4E_04_F6_F5_05 8
dundee[1081]: dundee/device.c:connect_callback() 0x1e78960
dundee[1081]: dundee/device.c:debug() Control: > ATD*99#\r
dundee[1081]: dundee/bluez5.c:bluetooth_device_connect_callback() Success
dundee[1081]: dundee/device.c:debug() Control: < ATD*99#\r
dundee[1081]: dundee/device.c:debug() Control: < \r\nCONNECT\r\n
dundee[1081]: dundee/device.c:debug() PPP: lcp: pppcp_generate_event: current state 0:INITIAL
dundee[1081]: dundee/device.c:debug() PPP: event: 0 (Up), action: 2, new_state: 2 (CLOSED)
dundee[1081]: dundee/device.c:debug() PPP: lcp: pppcp_generate_event: current state 2:CLOSED
dundee[1081]: dundee/device.c:debug() PPP: event: 2 (Open), action: 1026, new_state: 6 (REQSENT)
dundee[1081]: dundee/device.c:debug() PPP: lcp: pppcp_initialize_restart_count: current state 2:CLOSED
dundee[1081]: dundee/device.c:debug() PPP: lcp: pppcp_send_configure_request: current state 2:CLOSED
dundee[1081]: dundee/device.c:debug() PPP: gatchat/gatppp.c:ppp_enter_phase() 1
dundee[1081]: dundee/device.c:debug() PPP: lcp: pppcp_process_configure_request: current state 6:REQSENT
dundee[1081]: dundee/device.c:debug() PPP: lcp: pppcp_generate_event: current state 6:REQSENT
dundee[1081]: dundee/device.c:debug() PPP: event: 7 (RCR-), action: 4006, new_state: 6 (REQSENT)
dundee[1081]: dundee/device.c:debug() PPP: lcp: pppcp_send_configure_nak: current state 6:REQSENT
dundee[1081]: dundee/device.c:debug() PPP: lcp: pppcp_process_configure_ack: current state 6:REQSENT
dundee[1081]: dundee/device.c:debug() PPP: lcp: pppcp_generate_event: current state 6:REQSENT
dundee[1081]: dundee/device.c:debug() PPP: event: 8 (RCA), action: 27, new_state: 7 (ACKRCVD)
dundee[1081]: dundee/device.c:debug() PPP: lcp: pppcp_initialize_restart_count: current state 6:REQSENT
dundee[1081]: dundee/device.c:debug() PPP: lcp: pppcp_process_configure_request: current state 7:ACKRCVD
dundee[1081]: dundee/device.c:debug() PPP: lcp: pppcp_generate_event: current state 7:ACKRCVD
dundee[1081]: dundee/device.c:debug() PPP: event: 6 (RCR+), action: 2109, new_state: 9 (OPENED)
dundee[1081]: dundee/device.c:debug() PPP: lcp: pppcp_send_configure_ack: current state 7:ACKRCVD
dundee[1081]: dundee/device.c:debug() PPP: gatchat/gatppp.c:ppp_enter_phase() 2
dundee[1081]: dundee/device.c:debug() PPP: gatchat/gatppp.c:ppp_enter_phase() 3
dundee[1081]: dundee/device.c:debug() PPP: ipcp: pppcp_generate_event: current state 0:INITIAL
dundee[1081]: dundee/device.c:debug() PPP: event: 2 (Open), action: 401, new_state: 1 (STARTING)
dundee[1081]: dundee/device.c:debug() PPP: ipcp: pppcp_generate_event: current state 1:STARTING
dundee[1081]: dundee/device.c:debug() PPP: event: 0 (Up), action: 1026, new_state: 6 (REQSENT)
dundee[1081]: dundee/device.c:debug() PPP: ipcp: pppcp_initialize_restart_count: current state 1:STARTING
dundee[1081]: dundee/device.c:debug() PPP: ipcp: pppcp_send_configure_request: current state 1:STARTING
dundee[1081]: dundee/device.c:debug() PPP: ipcp: pppcp_process_configure_request: current state 6:REQSENT
dundee[1081]: dundee/device.c:debug() PPP: ipcp: pppcp_generate_event: current state 6:REQSENT
dundee[1081]: dundee/device.c:debug() PPP: event: 6 (RCR+), action: 2008, new_state: 8 (ACKSENT)
dundee[1081]: dundee/device.c:debug() PPP: ipcp: pppcp_send_configure_ack: current state 6:REQSENT
dundee[1081]: dundee/device.c:debug() PPP: ipcp: pppcp_process_configure_reject: current state 8:ACKSENT
dundee[1081]: dundee/device.c:debug() PPP: ipcp: pppcp_generate_event: current state 8:ACKSENT
dundee[1081]: dundee/device.c:debug() PPP: event: 9 (RCN), action: 1028, new_state: 8 (ACKSENT)
dundee[1081]: dundee/device.c:debug() PPP: ipcp: pppcp_initialize_restart_count: current state 8:ACKSENT
dundee[1081]: dundee/device.c:debug() PPP: ipcp: pppcp_send_configure_request: current state 8:ACKSENT
dundee[1081]: dundee/device.c:debug() PPP: ipcp: pppcp_process_configure_nak: current state 8:ACKSENT
dundee[1081]: dundee/device.c:debug() PPP: ipcp: pppcp_generate_event: current state 8:ACKSENT
dundee[1081]: dundee/device.c:debug() PPP: event: 9 (RCN), action: 1028, new_state: 8 (ACKSENT)
dundee[1081]: dundee/device.c:debug() PPP: ipcp: pppcp_initialize_restart_count: current state 8:ACKSENT
dundee[1081]: dundee/device.c:debug() PPP: ipcp: pppcp_send_configure_request: current state 8:ACKSENT
dundee[1081]: dundee/device.c:debug() PPP: ipcp: pppcp_process_configure_ack: current state 8:ACKSENT
dundee[1081]: dundee/device.c:debug() PPP: ipcp: pppcp_generate_event: current state 8:ACKSENT
dundee[1081]: dundee/device.c:debug() PPP: event: 8 (RCA), action: 129, new_state: 9 (OPENED)
dundee[1081]: dundee/device.c:debug() PPP: ipcp: pppcp_initialize_restart_count: current state 8:ACKSENT
dundee[1081]: dundee/device.c:debug() PPP: lcp: pppcp_generate_event: current state 9:OPENED
dundee[1081]: dundee/device.c:debug() PPP: event: 3 (Close), action: 8224, new_state: 4 (CLOSING)
dundee[1081]: dundee/device.c:debug() PPP: lcp: pppcp_initialize_restart_count: current state 9:OPENED
dundee[1081]: dundee/device.c:debug() PPP: lcp: pppcp_send_terminate_request: current state 9:OPENED
dundee[1081]: dundee/device.c:debug() PPP: ipcp: pppcp_generate_event: current state 9:OPENED
dundee[1081]: dundee/device.c:debug() PPP: event: 1 (Down), action: 201, new_state: 1 (STARTING)
dundee[1081]: dundee/device.c:debug() PPP: gatchat/gatppp.c:ppp_enter_phase() 5
dundee[1081]: dundee/device.c:debug() PPP: lcp: pppcp_process_terminate_ack: current state 4:CLOSING
dundee[1081]: dundee/device.c:debug() PPP: lcp: pppcp_generate_event: current state 4:CLOSING
dundee[1081]: dundee/device.c:debug() PPP: event: 11 (RTA), action: 802, new_state: 2 (CLOSED)
dundee[1081]: dundee/device.c:debug() PPP: lcp: pppcp_this_layer_finished: current state 2:CLOSED
dundee[1081]: dundee/device.c:debug() PPP: gatchat/gatppp.c:ppp_enter_phase() 0
dundee[1081]: dundee/device.c:debug() PPP: gatchat/gatppp.c:ppp_dead()
dundee[1081]: dundee/device.c:ppp_disconnect() 0x1e78960
dundee[1081]: dundee/device.c:ppp_disconnect() PPP Link down: 3
dundee[1081]: dundee/bluez5.c:bluetooth_device_disconnect() /org/bluez/hci0/dev_A0_4E_04_F6_F5_05
dundee[1081]: dundee/device.c:dundee_device_disconnect() /device0
dundee[1081]: dundee/bluez5.c:bluetooth_device_disconnect() /org/bluez/hci0/dev_A0_4E_04_F6_F5_05
dundee[1081]: dundee/device.c:dundee_device_disconnect() /device0
next prev parent reply other threads:[~2013-03-18 9:55 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-04 19:33 [PATCH 00/13] Add support for BlueZ 5 Profile1 API to dundee Paulo Borges
2013-03-04 19:33 ` [PATCH 01/13] dundee: Rename dundee BlueZ 4 support Paulo Borges
2013-03-04 19:33 ` [PATCH 02/13] dundee: Start BlueZ 5 support Paulo Borges
2013-03-11 17:01 ` Daniel Wagner
2013-03-04 19:33 ` [PATCH 03/13] bluez5: Add DUN_UUID Paulo Borges
2013-03-04 19:33 ` [PATCH 04/13] dundee: Initial GDBusClient for BlueZ 5 Paulo Borges
2013-03-11 17:08 ` Daniel Wagner
2013-03-04 19:33 ` [PATCH 05/13] dundee: Add mechanism to store bluetooth devices Paulo Borges
2013-03-04 19:33 ` [PATCH 06/13] dundee: Add tracking of " Paulo Borges
2013-03-04 19:33 ` [PATCH 07/13] dundee: Listen to devices property changes Paulo Borges
2013-03-11 17:17 ` Daniel Wagner
2013-03-12 9:56 ` Daniel Wagner
2013-03-04 19:33 ` [PATCH 08/13] dundee: Add dundee device driver skeleton Paulo Borges
2013-03-04 19:33 ` [PATCH 09/13] dundee: Register/unregister dundee device Paulo Borges
2013-03-04 19:37 ` [PATCH 10/13] dundee: Add BlueZ Profile handler Paulo Borges
2013-03-04 19:38 ` [PATCH 11/13] dundee: Add support for driver connect Paulo Borges
2013-03-04 19:38 ` [PATCH 12/13] dundee: Add dundee disconnect function Paulo Borges
2013-03-04 19:39 ` [PATCH 13/13] dundee: Handle Profile connect and disconnect Paulo Borges
2013-03-11 17:23 ` [PATCH 00/13] Add support for BlueZ 5 Profile1 API to dundee Daniel Wagner
2013-03-11 20:41 ` Paulo Borges
2013-03-14 13:32 ` [PATCH v2 " Paulo Borges
2013-03-14 13:32 ` [PATCH v2 01/13] dundee: Rename dundee BlueZ 4 support Paulo Borges
2013-03-14 13:32 ` [PATCH v2 02/13] dundee: Start BlueZ 5 support Paulo Borges
2013-03-14 13:32 ` [PATCH v2 03/13] bluez5: Add DUN_UUID Paulo Borges
2013-03-14 13:32 ` [PATCH v2 04/13] dundee: Initial GDBusClient for BlueZ 5 Paulo Borges
2013-03-14 13:32 ` [PATCH v2 05/13] dundee: Add mechanism to store bluetooth devices Paulo Borges
2013-03-14 13:32 ` [PATCH v2 06/13] dundee: Add tracking of " Paulo Borges
2013-03-14 13:32 ` [PATCH v2 07/13] dundee: Listen to devices property changes Paulo Borges
2013-03-19 21:10 ` Daniel Wagner
2013-03-14 13:32 ` [PATCH v2 08/13] dundee: Add dundee device driver skeleton Paulo Borges
2013-03-14 13:32 ` [PATCH v2 09/13] dundee: Register/unregister dundee device Paulo Borges
2013-03-14 13:32 ` [PATCH v2 10/13] dundee: Add BlueZ Profile handler Paulo Borges
2013-03-14 13:32 ` [PATCH v2 11/13] dundee: Add support for driver connect Paulo Borges
2013-03-18 8:38 ` Daniel Wagner
2013-03-14 13:32 ` [PATCH v2 12/13] dundee: Add dundee disconnect function Paulo Borges
2013-03-14 13:32 ` [PATCH v2 13/13] dundee: Handle Profile connect and disconnect Paulo Borges
2013-03-18 9:55 ` Daniel Wagner [this message]
2013-03-19 17:11 ` [PATCH v2 00/13] Add support for BlueZ 5 Profile1 API to dundee Vinicius Costa Gomes
2013-03-20 22:26 ` [PATCH v3 " Paulo Borges
2013-03-20 22:26 ` [PATCH v3 01/13] dundee: Rename dundee BlueZ 4 support Paulo Borges
2013-03-20 22:26 ` [PATCH v3 02/13] dundee: Start BlueZ 5 support Paulo Borges
2013-03-20 22:26 ` [PATCH v3 03/13] bluez5: Add DUN_UUID Paulo Borges
2013-03-20 22:26 ` [PATCH v3 04/13] dundee: Initial GDBusClient for BlueZ 5 Paulo Borges
2013-03-20 22:26 ` [PATCH v3 05/13] dundee: Add mechanism to store bluetooth devices Paulo Borges
2013-03-20 22:26 ` [PATCH v3 06/13] dundee: Add tracking of " Paulo Borges
2013-03-20 22:26 ` [PATCH v3 07/13] dundee: Listen to devices property changes Paulo Borges
2013-03-20 22:26 ` [PATCH v3 08/13] dundee: Add dundee device driver skeleton Paulo Borges
2013-03-20 22:26 ` [PATCH v3 09/13] dundee: Register/unregister dundee device Paulo Borges
2013-03-20 22:26 ` [PATCH v3 10/13] dundee: Add BlueZ Profile handler Paulo Borges
2013-03-20 22:26 ` [PATCH v3 11/13] dundee: Add support for driver connect Paulo Borges
2013-03-20 22:26 ` [PATCH v3 12/13] dundee: Add dundee disconnect function Paulo Borges
2013-03-20 22:26 ` [PATCH v3 13/13] dundee: Handle Profile connect and disconnect Paulo Borges
2013-03-24 12:31 ` [PATCH v3 00/13] Add support for BlueZ 5 Profile1 API to dundee Daniel Wagner
2013-03-25 14:43 ` Paulo Borges
2013-04-02 13:12 ` Daniel Wagner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5146E4A9.8060306@monom.org \
--to=wagi@monom.org \
--cc=ofono@ofono.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox