From: Viallard Anthony <viallard@syscom-instruments.com>
To: ofono@ofono.org
Subject: Problem when disable GPRS context and try to re-enable it
Date: Fri, 17 May 2013 12:33:02 +0200 [thread overview]
Message-ID: <5196075E.60309@syscom-instruments.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 2960 bytes --]
Hello,
I start a new thread about a bad thing I seen. I can't re-enable a
previously disabled context.
Here the command to reproduce the issue:
---------------------------
dbus-send --system --type=method_call --print-reply --dest=org.ofono
/simcom_0/context1 org.ofono.ConnectionContext.SetProperty string:"Activ
e" variant:boolean:true
dbus-send --system --type=method_call --print-reply --dest=org.ofono
/simcom_0/context1 org.ofono.ConnectionContext.SetProperty string:"Activ
e" variant:boolean:false
dbus-send --system --type=method_call --print-reply --dest=org.ofono
/simcom_0/context1 org.ofono.ConnectionContext.SetProperty string:"Activ
e" variant:boolean:true
---------------------------
and bellow, the log:
---------------------------
ofonod[10347]: Modem: > AT+CGDCONT=1,"IP","gprs.swisscom.ch"\r
ofonod[10347]: Modem: < \r\nOK\r\n
ofonod[10347]: drivers/atmodem/gprs-context.c:at_cgdcont_cb() ok 1
ofonod[10347]: Modem: > AT+CGDATA="PPP",1\r
ofonod[10347]: Modem: < \r\nCONNECT 115200\r\n
ofonod[10347]: drivers/atmodem/gprs-context.c:at_cgdata_cb() ok 1
ofonod[10347]: drivers/atmodem/gprs-context.c:setup_ppp()
ofonod[10347]: drivers/atmodem/gprs-context.c:ppp_connect()
ofonod[10347]: IP: 10.146.60.102
ofonod[10347]: DNS: 195.186.216.33, 195.186.152.33
ofonod[10347]: src/gprs.c:pri_activate_callback() 0x108698
ofonod[10347]: plugins/udev.c:udev_event() subsystem net add
ofonod[10347]: plugins/udev.c:udev_event() subsystem net finished
ofonod[10347]: plugins/udevng.c:check_modem_list()
ofonod[10347]:
drivers/atmodem/gprs-context.c:at_gprs_deactivate_primary() cid 1
ofonod[10347]: plugins/udevng.c:remove_device()
/sys/devices/virtual/net/ppp0
ofonod[10347]: plugins/udev.c:udev_event() subsystem net remove
ofonod[10347]: plugins/udev.c:remove_modem() /devices/virtual/net/ppp0
ofonod[10347]: plugins/udev.c:udev_event() subsystem net finished
ofonod[10347]: drivers/atmodem/gprs-context.c:ppp_disconnect() Reason: 6
ofonod[10347]: Modem: < \r\nNO CARRIER\r\n
ofonod[10347]: drivers/atmodem/gprs-context.c:at_gprs_activate_primary()
cid 1
ofonod[10347]: src/gprs.c:pri_activate_callback() 0x108698
ofonod[10347]: src/gprs.c:pri_activate_callback() Activating context
failed with error: Unknown error type
---------------------------
I read the code, added some logs and found the function
at_chat_send_common() doesn't do his job because chat->command_queue is
NULL.
I guess chat->command_queue is free and set to NULL in
chat_cleanup(struct at_chat *chat) but I don't dig more why this
function is call...
Any ideas ?
Regards,
Anthony Viallard.
--
-----------------------------------------
Viallard Anthony (+41 024 455 24 82)
[ Embedded System | Software Designer ]
-----------------------------------------
Syscom Instruments SA
Rue de l'industrie 21
1450 Sainte-Croix
-----------------------------------------
next reply other threads:[~2013-05-17 10:33 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-17 10:33 Viallard Anthony [this message]
2013-05-21 13:24 ` Problem when disable GPRS context and try to re-enable it Denis Kenzior
2013-05-21 14:11 ` Viallard Anthony
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5196075E.60309@syscom-instruments.com \
--to=viallard@syscom-instruments.com \
--cc=ofono@ofono.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox