From: Marko Sulejic <marko.sulejic@hale.at>
To: ofono@ofono.org
Subject: Re: HE910 + ofono: "Activating context failed with error: Unknown error type"
Date: Thu, 25 Jun 2015 15:05:51 +0200 [thread overview]
Message-ID: <558BFCAF.4070700@hale.at> (raw)
In-Reply-To: <558BC6C8.9080600@hale.at>
[-- Attachment #1: Type: text/plain, Size: 2549 bytes --]
Hi again,
the problem seems to be in the
atmodem/gprs-context.c : gprs_activate_primary
function, where
if (g_at_chat_send(gcd->chat, buf, none_prefix,
at_cgdcont_cb, gc, NULL) > 0)
is called after a reconnect, and then it fails.
It seems to work if I call
g_at_chat_send(gcd->chat, "AT&C0", none_prefix,
NULL, NULL, NULL)
prior.
So this would mean that a disconnect or similar action sets DCD to low,
and the chats are closed.
Does oFono anywhere in the code sets DCD explicitely to low or is it
maybe a bug?
My patch would look something like this (if it is an HE910 issue only):
if (gcd->vendor == OFONO_VENDOR_TELIT)
{
if(g_at_chat_send(gcd->chat, "AT&C0", none_prefix,
NULL, NULL, NULL) <= 0)
goto error;
}
Thanks,
Marko
Am 2015-06-25 um 11:15 schrieb Marko Sulejic:
> Hi,
>
> I need your help in using a Telit HE910 with ofono (and eventually
> connman).
> (I am using ofono 1.16 with HE910 firmware version 12.00.006; connman
> version is 1.29).
>
> My problem is the following ...
> on startup everything works fine and the ppp0 connection is established,
> but problems occur in the following case:
>
> connmanctl> disconnect cellular_*_context15
> Disconnected cellular_*_context15
>
> connmanctl> connect cellular_*_context15
> Error /net/connman/service/cellular_*_context15: Input/output error
>
>
> ofonod[5355]: gprs-context.c(244):at_gprs_activate_primary() cid 1
> ofonod[5355]: gprs.c(889):pri_activate_callback() 0x1a18c50
> ofonod[5355]: gprs.c(893):pri_activate_callback() Activating context
> failed with error: Unknown error type
> connmand[3815]: Failed to change property: /he910_0/context15
> org.ofono.ConnectionContext.Active: org.ofono.Error.Failed Operation
> failed
>
>
> The same error happens if I am manually sending connect/disconnect via
> dbus-send.
>
> Only a hard ofono restart can establish the connection again.
> This behavior happens all the time once a ppp0 disconnect happened
> (e.g. by removing the SIM; manual disconnect via dbus or connmanctl).
>
> A subquestion regarding connman:
> Can connmand be configured in such a way that on every connection
> loss, ofono is triggered to reconnect to the Internet?
>
> Thank you very muchin advance,
> Marko
> _______________________________________________
> ofono mailing list
> ofono(a)ofono.org
> https://lists.ofono.org/mailman/listinfo/ofono
next prev parent reply other threads:[~2015-06-25 13:05 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-25 9:15 HE910 + ofono: "Activating context failed with error: Unknown error type" Marko Sulejic
2015-06-25 13:05 ` Marko Sulejic [this message]
2015-06-29 11:16 ` Marko Sulejic
2015-06-29 12:59 ` Enrico Sau
2015-06-29 13:33 ` Marko Sulejic
2015-06-26 2:20 ` Denis Kenzior
2015-06-30 5:54 ` Marko Sulejic
2015-06-30 11:31 ` Marko Sulejic
2015-06-26 23:01 ` Denis Kenzior
2015-06-30 15:16 ` Enrico Sau
2015-07-01 7:14 ` Marko Sulejic
2015-07-01 7:11 ` Marko Sulejic
2015-07-01 0:44 ` Denis Kenzior
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=558BFCAF.4070700@hale.at \
--to=marko.sulejic@hale.at \
--cc=ofono@ofono.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox