From: Denis Kenzior <denkenz@gmail.com>
To: ofono@ofono.org
Subject: Re: Huawei 3131 with idVendor=12d1, idProduct=14fe
Date: Mon, 11 Jan 2016 11:18:12 -0600 [thread overview]
Message-ID: <5693E3D4.2060804@gmail.com> (raw)
In-Reply-To: <CADnUhn0c1g7zu2aORxRZzyRK2tkGvZw0PugFvgV2WUWy4V5NGg@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 2859 bytes --]
Hi Matti,
On 01/11/2016 09:02 AM, matti kaasinen wrote:
> Denis,
> I noticed from the logs that 'net' should have been probed by
> huawei_cdc_ncm module instead of plain cdc_ncm. I managed getting sysfs
> lines after "net finished" line in ofonod log after changing cdc_ncm to
> huawei_cdc_ncm (below):
> ..plugins/udev.c:udev_event() subsystem net finished
> ..plugins/udevng.c:check_usb_device() huawei_cdc_ncm [12d1:1506]
> ..plugins/udevng.c:add_device()
> /sys/devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb2/2-1
> ..plugins/udevng.c:add_device()
> /sys/devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrc.1.auto/usb2/2-1/2-1:1.1/net/wwan0
> ..plugins/udevng.c:add_device() wwan0 (huawei) 255/2/22 ==> (null) (null)
>
>
> I also got net record from setup_huawei() printout:
> ..plugins/udevng.c:setup_huawei() mdm=/dev/ttyUSB0 pcui=/dev/ttyUSB2
> diag=/dev/ttyUSB1 qmi=(null) net=wwan0
>
So looks like your device is detected properly now.
>
> Now this process proceeded further providing printout from
> provision_get_settings():
> ..plugins/provision.c:provision_get_settings() Provisioning for MCC 244,
> MNC 05, SPN 'elisa'
> ..plugins/provision.c:provision_get_settings() Found 1 APs
> ..plugins/provision.c:provision_get_settings() Name: '(null)'
> ..plugins/provision.c:provision_get_settings() APN: 'internet'
> ..plugins/provision.c:provision_get_settings() Type:
> OFONO_GPRS_CONTEXT_TYPE_INTERNET
> ..plugins/provision.c:provision_get_settings() Username: '(null)'
> ..plugins/provision.c:provision_get_settings() Password: '(null)'
>
And at least reading EFspn from the SIM works. So provisioning succeeds.
>
> After that came some errors:
> ..src/sim.c:ofono_sim_remove_spn_watch() 0x11cf60
> ofonod: PCUI: > AT+CPBS=?\r
> ofonod: PCUI: < \r\n+CME ERROR: 14\r\n
> ofonod: PCUI: > AT+CPBS=?\r
> ofonod: PCUI: < \r\n+CME ERROR: 14\r\n
> ofonod: PCUI: > AT+CPBS=?\r
> ofonod: PCUI: < \r\n+CPBS: ("SM","EN","ON")\r\n\r\nOK\r\n
This is a separate issue. The phonebook is not ready for reading.
Shouldn't affect data connections though...
>
> I did not see any progress on connman side.
>
> Modifications in plugins/udevng.c
> vendor_list[]:
> { "huawei", "huawei_cdc_ncm", "12d1" },
>
> setup_huawei():
> g_strcmp0(info->interface, "255/2/22") == 0 ||
> g_strcmp0(info->interface, "255/1/56") == 0) {
> net = info->devnode;
>
Feel free to send a patch for this.
>
> Where should I look next?
> I could provide full log, but I am not sure if attachments/messages with
> attachments pass through.
What does list-contexts show? Can you do test/online-modem and
test/activate-context, test/process-context-settings?
The logs should show up fine.
Regards,
-Denis
next prev parent reply other threads:[~2016-01-11 17:18 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CADnUhn1efXRB7fZGkSfsToHH5gxd-tK4OxJxF9MhP334P1Pvcw@mail.gmail.com>
2016-01-11 15:02 ` Huawei 3131 with idVendor=12d1, idProduct=14fe matti kaasinen
2016-01-11 17:18 ` Denis Kenzior [this message]
2016-01-11 17:52 ` matti kaasinen
2016-01-12 8:38 ` matti kaasinen
2016-01-12 8:47 ` matti kaasinen
2016-01-12 9:40 ` matti kaasinen
2016-01-12 10:04 ` matti kaasinen
2016-01-12 16:30 ` Denis Kenzior
2016-01-12 16:46 ` matti kaasinen
2016-01-12 16:52 ` Denis Kenzior
2016-01-12 16:56 ` matti kaasinen
2016-01-12 17:20 ` Denis Kenzior
2016-01-13 10:40 ` matti kaasinen
2016-01-13 16:04 ` Denis Kenzior
2016-01-14 10:19 ` matti kaasinen
2016-01-14 15:32 ` Denis Kenzior
2016-01-14 15:53 ` matti kaasinen
2016-01-14 15:55 ` Denis Kenzior
2016-01-15 10:14 ` matti kaasinen
2016-01-20 14:47 ` matti kaasinen
2016-01-20 15:25 ` =?unknown-8bit?q?Bj=C3=B8rn?= Mork
2016-01-20 17:20 ` matti kaasinen
2016-01-21 8:05 ` matti kaasinen
2016-01-23 20:32 ` CedrIc Jehasse
2016-02-24 14:49 ` matti kaasinen
2016-01-21 12:56 ` matti kaasinen
2016-01-12 19:08 ` =?unknown-8bit?q?Bj=C3=B8rn?= Mork
2016-01-13 16:08 ` Denis Kenzior
2015-12-30 10:31 matti kaasinen
2015-12-31 8:39 ` matti kaasinen
2016-01-04 16:18 ` Denis Kenzior
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5693E3D4.2060804@gmail.com \
--to=denkenz@gmail.com \
--cc=ofono@ofono.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox