Hi Dragos,

Am 22.04.2016 um 17:36 schrieb Dragos Tatulea:
> Hi Yorn,
>
> On 04/22/2016 01:51 PM, Yorn wrote:
>> Hi Dragos,
>>
>> many thanks for all the effort! Comments inline:
>>
>> Am 22.04.2016 um 12:23 schrieb Dragos Tatulea:
>>> Hi Yorn,
>>>
>>> On 04/21/2016 08:37 PM, Yorn wrote:
>>>> Hi Dragos
>>>>
>>>> Am 21.04.2016 um 11:03 schrieb Dragos Tatulea:
>>>>> Hi Yarn,
>>>>>
>>>>> On 04/20/2016 07:54 PM, Yorn wrote:
>>>>>> Hi Dragos,
>>>>>>
>>>>>> logs + comments inline
>>>>>>
>>>>>> Am 20.04.2016 um 17:01 schrieb Dragos Tatulea:
>>>>>>> Hi Yorn,
>>>>>>>
>>>>>>> On 04/20/2016 04:24 PM, Yorn wrote:
>>>>>>>> Hi Dragos,
>>>>>>>>
>>>>>>>> it is still active=0 :(
>>>>>>>>
>>>>>>>> root(a)colibri-vf:~/test# ./list-contexts
>>>>>>>> [ /ublox_0 ]
>>>>>>>>         [ /ublox_0/context1 ]
>>>>>>>>             Username =
>>>>>>>>             AuthenticationMethod = chap
>>>>>>>>             Protocol = ip
>>>>>>>>             Name = Internet
>>>>>>>>             Settings = { }
>>>>>>>>             IPv6.Settings = { }
>>>>>>>>             Active = 0
>>>>>>>>             AccessPointName =
>>>>>>>>             Password =
>>>>>>>>             Type = internet
>>>>>>>>
>>>>>>> Can you run only oFono (no connman) with OFONO_AT_DEBUG env variable set
>>>>>>> and run the following scripts:
>>>>>>>
>>>>>>> enable-modem
>>>>>>> online-modem
>>>>>>> activate-context
>>>>>>>
>>>>>>> Then send the logs.
>>>>>> Here they are [1]
>>>> I am actually a bit lost in the ublox AT Commands manual..
>>>>
>>>> Do you have a chance to see something at the ofonod+AT logs with your expertice!?
>>>>
>>> oFono was able to register on the network an activate the context. This
>>> part is interesting for you:
>>>
>>> ofonod[369]: drivers/ubloxmodem/gprs-context.c:ublox_gprs_activate_primary() cid 1
>>> ofonod[369]: Aux: > AT\r
>>> ofonod[369]: Aux: < \r\nOK\r\n
>>> ofonod[369]: Aux: Finally woke up the modem
>>> ofonod[369]: Aux: > AT+CGDCONT=1,"IP","m2m.tele2.com"\r
>>> *> context defined
>>>
>>> ofonod[369]: Aux: < \r\nOK\r\n
>>> ofonod[369]: drivers/ubloxmodem/gprs-context.c:cgdcont_cb() ok 1
>>> ofonod[369]: Aux: > AT+CGACT=1,1\r
>>> *> context activated
>>>
>>> ofonod[369]: Aux: < \r\nOK\r\n
>>> ofonod[369]: drivers/ubloxmodem/gprs-context.c:cgact_enable_cb() ok 1
>>> ofonod[369]: Aux: > AT+CGCONTRDP=1\r
>>> ofonod[369]: Aux: < \r\n+CREG: 5,"0000","00000010",4\r\n\r\n+CGEV: ME PDN ACT 1\r\n
>>> ofonod[369]: src/network.c:ofono_netreg_status_notify() /ublox_0 status 5 tech 4
>>> ofonod[369]: src/gprs.c:netreg_status_changed() 5
>>> ofonod[369]: src/gprs.c:gprs_netreg_update() attach: 1, driver_attached: 1
>>> ofonod[369]: Aux: < \r\n+CGCONTRDP: 1,0,"m2m.tele2.com","
>>> ofonod[369]: Aux: < 100.98.55.207.255.255.255.255","100.98.55.207","130.244.127.161","130.244.127.169","0.0.0.0","0.0.0.0",0\r\n
>>> ofonod[369]: Aux: < \r\nOK\r\n
>>> *> connection properties read successfully
>>>
>>> ofonod[369]: drivers/ubloxmodem/gprs-context.c:cgcontrdp_cb() ok 1
>>> ofonod[369]: src/modem.c:get_modem_property() modem 0x192a900 property NetworkInterface
>>>
>>>> The connman cellular service is set to "a" (association) from starting
>>>> connect cellular_240075810199181_context1
>>>> up until timeout.
>>>>
>>> Do you still run the oFono scripts? From the logs it looks like connman
>>> is trying to activate an already active context.
>> The technologie and the service is running, but the association does not end successfully. Do I need to set something else in connman? Where do I have to look?
>>
>> The try to connect ends up with:
>> Error /net/connman/service/cellular_240075810199181_context1: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
>>
> Can you send the connman logs as well? I'm not really sure what's
> happening here.
sure, here it is!

BR - Yorn
>
> Thanks