From mboxrd@z Thu Jan 1 00:00:00 1970 From: Manuel Traut To: op-tee@lists.trustedfirmware.org Subject: Re: [PATCH v7 4/4] optee: probe RPMB device using RPMB subsystem Date: Thu, 30 May 2024 09:35:10 +0200 Message-ID: In-Reply-To: MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="===============4741305203133513099==" List-Id: --===============4741305203133513099== Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable Hi Mikko, On Wed, May 29, 2024 at 05:26:15PM +0300, Mikko Rapeli wrote: > Hi, >=20 > On Wed, May 29, 2024 at 11:38:06AM +0200, Manuel Traut wrote: > > Hi Mikko, > >=20 > > On 10:09 Wed 29 May , Mikko Rapeli wrote: > > > On Wed, May 29, 2024 at 10:56:04AM +0530, Sumit Garg wrote: > > > > On Tue, 28 May 2024 at 15:00, Mikko Rapeli wrote: > > > > > On Mon, May 27, 2024 at 03:24:01PM +0200, Jens Wiklander wrote: > > > > > > On Mon, May 27, 2024 at 3:00=E2=80=AFPM Jerome Forissier > > > > > > wrote: > > > > > > > On 5/27/24 14:13, Jens Wiklander wrote: > > > > > Outside of these patches, I think the optee RPC setup with fTPM TA = is one area which > > > > > currently requires tee-supplicant to be started. Detecting the exis= tence of TPM before > > > > > kernel drivers are loaded is possible via the exported EFI logs fro= m firmware to kernel > > > > > or ACPI TPM2 table entry, and detecting optee and thus starting tee= -supplicant in userspace too. > > > >=20 > > > > One thing I am trying to find an answer about is why do we need to > > > > defer tee-supplicant launch if it's bundled into initrd? Once you > > > > detect OP-TEE then tee-supplicant should be launched unconditionally. > > > > As per your example below, the motivation here seems to be the TPM2 > > > > device dependent on RPMB backend but what if other future systemd > > > > services come up and depend on other services offered by > > > > tee-supplicant? > > >=20 > > > There is an annoying depedency between firmware side optee and TAs, and= kernel optee driver, > > > tee-supplicant in userspace and kernel TA drivers like fTPM. > > >=20 > > > Kernel fTPM driver and fTPM TA require tee-supplicant in userspace for = RPMB, RPC etc. > > >=20 > > > This patch series is adding kernel side support for RPMB handling so th= at the dependency to > > > tee-supplicant in userspace can be removed. For fTPM use case, there is= still the optee RPC > > > buffer setup which currently requires tee-supplicant in userspace or fT= PM TA will panic. > > >=20 > > > So yes, currently, tee-supplicant must be started. But it would be grea= t if kernel drivers > > > and firmware optee trusted applications would not depend on tee-supplic= ant running in userspace. > > > The startup sequence is really tricky to get right. My fTPM use case is= using the TPM device > > > to encrypt rootfs and thus all SW components including tee-supplicant n= eed to run early in > > > initramfs. Currently also switch from initramfs to main rootfs requires= unloading > > > fTPM kernel driver and stopping tee-supplicant in initrd, and then star= ting tee-supplicant > > > and loading fTPM kernel driver from main rootfs. udev and automatic mod= ule loading for > > > fTPM can not be used due to the tee-supplicant userspace dependency. > >=20 > > I decided to build fTPM as buildin-TA into OP-TEE. RPMB routing is already > > implemented in u-boot so it can already write PCR registers. >=20 > Is build in TA same as early TA? I presume so. Indeed.. sorry for using the wrong term. > > With this series and the required changes in OP-TEE and a compiled in fTPM > > kernel driver and systemd v256 it is possible to use the fTPM in the init= rd > > without tee-supplicant. > >=20 > > Maybe this information is helpful to you, regards >=20 > This is very interesting and I'm trying to get to the same state, though wi= th > fTPM kernel driver as module. With v6 of this patch set and matching optee = changes > I was not able to make this work as fTPM TA was crashing when loading ftpm = kernel driver > due to failing RPC allocation, which tee-supplicant was setting up in the w= hole chain. > I'll try to get v7 patches working and test this again on my yocto based se= tup and kernel 6.6.y. I'll try today also with v7 and 6.10-rc1 on an i.MX8MM. It should also work with fTPM as kernel module if you use systemd in the initrd with the new tpm.target in systemd v256. Regards Manuel --===============4741305203133513099==--