From: Vince Chang <vince_chang@aspeedtech.com>
To: <openbmc@lists.ozlabs.org>, <andrew@codeconstruct.com.au>,
<tan.siewert@9elements.com>
Cc: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>, <joel@jms.id.au>,
"Guenter Roeck" <linux@roeck-us.net>,
Wim Van Sebroeck <wim@linux-watchdog.org>
Subject: [PATCH linux dev-6.18 2/4] watchdog: aspeed: Support variable number of reset mask registers
Date: Thu, 29 Oct 2026 13:08:43 +0800 [thread overview]
Message-ID: <20261029050847.810331-3-vince_chang@aspeedtech.com> (raw)
In-Reply-To: <20261029050847.810331-1-vince_chang@aspeedtech.com>
From: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>
Starting from the AST2600 platform, the SoC design has become more
complex, with an increased number of reset mask registers.
To support this, introduce a new field 'num_reset_masks' in the
'aspeed_wdt_config' structure to specify the number of reset mask
registers per platform. This change removes the need for hardcoded
platform-specific logic and improves scalability for future SoCs.
Signed-off-by: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
(cherry picked from commit 0eb54296dc784de757724055983d32b03c9e2df1)
Signed-off-by: Vince Chang <vince_chang@aspeedtech.com>
---
drivers/watchdog/aspeed_wdt.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/drivers/watchdog/aspeed_wdt.c b/drivers/watchdog/aspeed_wdt.c
index 837e15701c0e..d23e565f30a8 100644
--- a/drivers/watchdog/aspeed_wdt.c
+++ b/drivers/watchdog/aspeed_wdt.c
@@ -35,6 +35,7 @@ struct aspeed_wdt_config {
u32 irq_shift;
u32 irq_mask;
struct aspeed_wdt_scu scu;
+ u32 num_reset_masks;
};
struct aspeed_wdt {
@@ -66,6 +67,7 @@ static const struct aspeed_wdt_config ast2500_config = {
.wdt_reset_mask = 0x1,
.wdt_reset_mask_shift = 2,
},
+ .num_reset_masks = 1,
};
static const struct aspeed_wdt_config ast2600_config = {
@@ -78,6 +80,7 @@ static const struct aspeed_wdt_config ast2600_config = {
.wdt_reset_mask = 0xf,
.wdt_reset_mask_shift = 16,
},
+ .num_reset_masks = 2,
};
static const struct of_device_id aspeed_wdt_of_table[] = {
@@ -479,11 +482,11 @@ static int aspeed_wdt_probe(struct platform_device *pdev)
set_bit(WDOG_HW_RUNNING, &wdt->wdd.status);
}
- if ((of_device_is_compatible(np, "aspeed,ast2500-wdt")) ||
- (of_device_is_compatible(np, "aspeed,ast2600-wdt"))) {
+ if (!of_device_is_compatible(np, "aspeed,ast2400-wdt")) {
u32 reset_mask[2];
- size_t nrstmask = of_device_is_compatible(np, "aspeed,ast2600-wdt") ? 2 : 1;
+ size_t nrstmask = wdt->cfg->num_reset_masks;
u32 reg = readl(wdt->base + WDT_RESET_WIDTH);
+ int i;
reg &= wdt->cfg->ext_pulse_width_mask;
if (of_property_read_bool(np, "aspeed,ext-active-high"))
@@ -503,9 +506,8 @@ static int aspeed_wdt_probe(struct platform_device *pdev)
ret = of_property_read_u32_array(np, "aspeed,reset-mask", reset_mask, nrstmask);
if (!ret) {
- writel(reset_mask[0], wdt->base + WDT_RESET_MASK1);
- if (nrstmask > 1)
- writel(reset_mask[1], wdt->base + WDT_RESET_MASK2);
+ for (i = 0; i < nrstmask; i++)
+ writel(reset_mask[i], wdt->base + WDT_RESET_MASK1 + i * 4);
}
}
--
2.43.0
next prev parent reply other threads:[~2026-10-29 5:09 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-29 5:08 [PATCH linux dev-6.18 0/4] Backport ASPEED AST2700 watchdog support Vince Chang
2026-10-29 5:08 ` [PATCH linux dev-6.18 1/4] dt-bindings: watchdog: aspeed,ast2400-wdt: Add support for AST2700 Vince Chang
2026-10-29 5:08 ` Vince Chang [this message]
2026-10-29 5:08 ` [PATCH linux dev-6.18 3/4] watchdog: aspeed: Add support for AST2700 platform Vince Chang
2026-10-29 5:08 ` [PATCH linux dev-6.18 4/4] watchdog: aspeed: Propagate errors from optional IRQ lookup Vince Chang
2026-10-29 23:59 ` [PATCH linux dev-6.18 0/4] Backport ASPEED AST2700 watchdog support Andrew Jeffery
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261029050847.810331-3-vince_chang@aspeedtech.com \
--to=vince_chang@aspeedtech.com \
--cc=andrew@codeconstruct.com.au \
--cc=chin-ting_kuo@aspeedtech.com \
--cc=joel@jms.id.au \
--cc=linux@roeck-us.net \
--cc=openbmc@lists.ozlabs.org \
--cc=tan.siewert@9elements.com \
--cc=wim@linux-watchdog.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox