From: Martin Jansa <martin.jansa@gmail.com>
To: openembedded-core@lists.openembedded.org
Subject: [PATCH] python-2.6.6: py_package_preprocess should change Makefile only in PKGD not D
Date: Wed, 25 May 2011 14:40:05 +0200 [thread overview]
Message-ID: <1306327205-4325-1-git-send-email-Martin.Jansa@gmail.com> (raw)
* PACKAGEFUNCS ?= "perform_packagecopy \
${PACKAGE_PREPROCESS_FUNCS} \
our py_package_preprocess is called after perform_packagecopy which does copy D to PKGD
so we change it to target version in D (image/) before populating sysroot (sysroot-destdir/)
while keeping Makefile.sysroot version in PKGD which was created before calling
py_package_preprocess, so both package for runtime and sysroot end wrong
* I haven't seen this problem on faster builder, I guess because do_package and do_populate_sysroot
can run in paralell and I was lucky that do_populate_sysroot finished before py_package_preprocess
was started, but if you build python step by step -c package first you should see it every time
* here is proof that with PKGD it works better:
$ bitbake -c cleanall python
$ bitbake -c install python
$ grep LIBDIR= \
./packages-split/python-distutils/usr/lib/python2.6/config/Makefile \
./package/usr/lib/python2.6/config/Makefile \
./sysroot-destdir/usr/lib/python2.6/config/Makefile \
./image/usr/lib/python2.6/config/Makefile \
./Python-2.6.6/Makefile \
~/shr-core/tmp/sysroots/om-gta02/usr/lib/python2.6/config/Makefile
grep: ./packages-split/python-distutils/usr/lib/python2.6/config/Makefile: No such file or directory
grep: ./package/usr/lib/python2.6/config/Makefile: No such file or directory
grep: ./sysroot-destdir/usr/lib/python2.6/config/Makefile: No such file or directory
./image/usr/lib/python2.6/config/Makefile:LIBDIR= /OE/shr-core/tmp/sysroots/om-gta02/usr/lib
./Python-2.6.6/Makefile:LIBDIR= /usr/lib
/OE/shr-core/tmp/sysroots/om-gta02/usr/lib/python2.6/config/Makefile:LIBDIR= /OE/shr-core/tmp/sysroots/om-gta02/usr/lib
$ bitbake -c package python
$ grep LIBDIR= \
./packages-split/python-distutils/usr/lib/python2.6/config/Makefile \
./package/usr/lib/python2.6/config/Makefile \
./sysroot-destdir/usr/lib/python2.6/config/Makefile \
./image/usr/lib/python2.6/config/Makefile \
./Python-2.6.6/Makefile \
~/shr-core/tmp/sysroots/om-gta02/usr/lib/python2.6/config/Makefile
./packages-split/python-distutils/usr/lib/python2.6/config/Makefile:LIBDIR= /usr/lib
./package/usr/lib/python2.6/config/Makefile:LIBDIR= /usr/lib
grep: ./sysroot-destdir/usr/lib/python2.6/config/Makefile: No such file or directory
./image/usr/lib/python2.6/config/Makefile:LIBDIR= /OE/shr-core/tmp/sysroots/om-gta02/usr/lib
./Python-2.6.6/Makefile:LIBDIR= /usr/lib
/OE/shr-core/tmp/sysroots/om-gta02/usr/lib/python2.6/config/Makefile:LIBDIR= /OE/shr-core/tmp/sysroots/om-gta02/usr/lib
$ bitbake -c package python
$ grep LIBDIR= \
./packages-split/python-distutils/usr/lib/python2.6/config/Makefile \
./package/usr/lib/python2.6/config/Makefile \
./sysroot-destdir/usr/lib/python2.6/config/Makefile \
./image/usr/lib/python2.6/config/Makefile \
./Python-2.6.6/Makefile \
~/shr-core/tmp/sysroots/om-gta02/usr/lib/python2.6/config/Makefile
./packages-split/python-distutils/usr/lib/python2.6/config/Makefile:LIBDIR= /usr/lib
./package/usr/lib/python2.6/config/Makefile:LIBDIR= /usr/lib
./sysroot-destdir/usr/lib/python2.6/config/Makefile:LIBDIR= /OE/shr-core/tmp/sysroots/om-gta02/usr/lib
./image/usr/lib/python2.6/config/Makefile:LIBDIR= /OE/shr-core/tmp/sysroots/om-gta02/usr/lib
./Python-2.6.6/Makefile:LIBDIR= /usr/lib
/OE/shr-core/tmp/sysroots/om-gta02/usr/lib/python2.6/config/Makefile:LIBDIR= /OE/shr-core/tmp/sysroots/om-gta02/usr/lib
* without this patch we have /usr/lib/ in image/sysroot-destdir and SYSROOT_LIBDIR in package/packages-split
$ grep LIBDIR= \
./packages-split/python-distutils/usr/lib/python2.6/config/Makefile \
./package/usr/lib/python2.6/config/Makefile \
./sysroot-destdir/usr/lib/python2.6/config/Makefile \
./image/usr/lib/python2.6/config/Makefile \
./Python-2.6.6/Makefile \
~/shr-core/tmp/sysroots/om-gta02/usr/lib/python2.6/config/Makefile
./packages-split/python-distutils/usr/lib/python2.6/config/Makefile:LIBDIR= /OE/shr-core/tmp/sysroots/om-gta02/usr/lib
./package/usr/lib/python2.6/config/Makefile:LIBDIR= /OE/shr-core/tmp/sysroots/om-gta02/usr/lib
./sysroot-destdir/usr/lib/python2.6/config/Makefile:LIBDIR= /usr/lib
./image/usr/lib/python2.6/config/Makefile:LIBDIR= /usr/lib
./Python-2.6.6/Makefile:LIBDIR= /usr/lib
/OE/shr-core/tmp/sysroots/om-gta02/usr/lib/python2.6/config/Makefile:LIBDIR= /usr/lib
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
---
meta/recipes-devtools/python/python_2.6.6.bb | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/meta/recipes-devtools/python/python_2.6.6.bb b/meta/recipes-devtools/python/python_2.6.6.bb
index 65875ff..24f1d33 100644
--- a/meta/recipes-devtools/python/python_2.6.6.bb
+++ b/meta/recipes-devtools/python/python_2.6.6.bb
@@ -1,7 +1,7 @@
require python.inc
DEPENDS = "python-native db gdbm openssl readline sqlite3 zlib"
DEPENDS_sharprom = "python-native db readline zlib gdbm openssl"
-PR = "${INC_PR}.3"
+PR = "${INC_PR}.4"
LIC_FILES_CHKSUM = "file://LICENSE;md5=38fdd546420fab09ac6bd3d8a1c83eb6"
DISTRO_SRC_URI ?= "file://sitecustomize.py"
@@ -96,7 +96,7 @@ PACKAGE_PREPROCESS_FUNCS += "py_package_preprocess"
py_package_preprocess () {
# copy back the old Makefile to fix target package
- install -m 0644 Makefile.orig ${D}/${libdir}/python${PYTHON_MAJMIN}/config/Makefile
+ install -m 0644 Makefile.orig ${PKGD}/${libdir}/python${PYTHON_MAJMIN}/config/Makefile
}
require python-${PYTHON_MAJMIN}-manifest.inc
--
1.7.5.rc3
next reply other threads:[~2011-05-25 12:43 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-25 12:40 Martin Jansa [this message]
2011-05-25 14:59 ` [PATCH] python-2.6.6: py_package_preprocess should change Makefile only in PKGD not D Richard Purdie
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1306327205-4325-1-git-send-email-Martin.Jansa@gmail.com \
--to=martin.jansa@gmail.com \
--cc=openembedded-core@lists.openembedded.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox