From: Saul Wold <sgw@linux.intel.com>
To: openembedded-core@lists.openembedded.org
Subject: [PATCH] qemu: don't ignore libexecdir in configure
Date: Wed, 17 Oct 2012 09:51:15 -0700 [thread overview]
Message-ID: <1350492675-29611-1-git-send-email-sgw@linux.intel.com> (raw)
This allow the relocation of libexecdir to be done correctly
for the qemu-brigde-helper.
Signed-off-by: Saul Wold <sgw@linux.intel.com>
---
.../qemu/qemu-1.2.0/remove-hardcoded-libexec.patch | 41 ++++++++++++++++++++
.../qemu/qemu-git/remove-hardcoded-libexec.patch | 41 ++++++++++++++++++++
meta/recipes-devtools/qemu/qemu_1.2.0.bb | 3 +-
3 files changed, 84 insertions(+), 1 deletion(-)
create mode 100644 meta/recipes-devtools/qemu/qemu-1.2.0/remove-hardcoded-libexec.patch
create mode 100644 meta/recipes-devtools/qemu/qemu-git/remove-hardcoded-libexec.patch
diff --git a/meta/recipes-devtools/qemu/qemu-1.2.0/remove-hardcoded-libexec.patch b/meta/recipes-devtools/qemu/qemu-1.2.0/remove-hardcoded-libexec.patch
new file mode 100644
index 0000000..8db460a
--- /dev/null
+++ b/meta/recipes-devtools/qemu/qemu-1.2.0/remove-hardcoded-libexec.patch
@@ -0,0 +1,41 @@
+This will allow the libexecdir to be set on the command line
+and have the files installed and used from the correct location
+
+Upstream-Status: Inappropriate [oe-core specific]
+
+Signed-off-by: Saul Wold <sgw@linux.intel.com>
+
+Index: qemu-1.2.0/configure
+===================================================================
+--- qemu-1.2.0.orig/configure
++++ qemu-1.2.0/configure
+@@ -183,6 +183,7 @@ datadir="\${prefix}/share"
+ qemu_docdir="\${prefix}/share/doc/qemu"
+ bindir="\${prefix}/bin"
+ libdir="\${prefix}/lib"
++libexecdir="\${prefix}/libexec"
+ includedir="\${prefix}/include"
+ sysconfdir="\${prefix}/etc"
+ confsuffix="/qemu"
+@@ -644,7 +645,9 @@ for opt do
+ ;;
+ --sysconfdir=*) sysconfdir="$optarg"
+ ;;
+- --sbindir=*|--libexecdir=*|--sharedstatedir=*|--localstatedir=*|\
++ --libexecdir=*) libexecdir="$optarg"
++ ;;
++ --sbindir=*|--sharedstatedir=*|--localstatedir=*|\
+ --oldincludedir=*|--datarootdir=*|--infodir=*|--localedir=*|\
+ --htmldir=*|--dvidir=*|--pdfdir=*|--psdir=*)
+ # These switches are silently ignored, for compatibility with
+@@ -3190,8 +3193,8 @@ echo "sysconfdir=$sysconfdir" >> $config
+ echo "qemu_confdir=$qemu_confdir" >> $config_host_mak
+ echo "qemu_datadir=$qemu_datadir" >> $config_host_mak
+ echo "qemu_docdir=$qemu_docdir" >> $config_host_mak
+-echo "libexecdir=\${prefix}/libexec" >> $config_host_mak
+-echo "CONFIG_QEMU_HELPERDIR=\"$prefix/libexec\"" >> $config_host_mak
++echo "libexecdir=$libexecdir" >> $config_host_mak
++echo "CONFIG_QEMU_HELPERDIR=\"$libexecdir\"" >> $config_host_mak
+
+ echo "ARCH=$ARCH" >> $config_host_mak
+ if test "$debug_tcg" = "yes" ; then
diff --git a/meta/recipes-devtools/qemu/qemu-git/remove-hardcoded-libexec.patch b/meta/recipes-devtools/qemu/qemu-git/remove-hardcoded-libexec.patch
new file mode 100644
index 0000000..83f5463
--- /dev/null
+++ b/meta/recipes-devtools/qemu/qemu-git/remove-hardcoded-libexec.patch
@@ -0,0 +1,41 @@
+This will allow the libexecdir to be set on the command line
+and have the files installed and used from the correct location
+
+Upstream-Status: Inappropriate [oe-core specific]
+
+Signed-off-by: Saul Wold <sgw@linux.intel.com>
+
+Index: qemu-1.2.0/configure
+===================================================================
+--- qemu-1.2.0.orig/configure
++++ qemu-1.2.0/configure
+@@ -183,6 +183,7 @@ datadir="\${prefix}/share"
+ qemu_docdir="\${prefix}/share/doc/qemu"
+ bindir="\${prefix}/bin"
+ libdir="\${prefix}/lib"
++libexecdir="\${prefix}/libexec"
+ includedir="\${prefix}/include"
+ sysconfdir="\${prefix}/etc"
+ confsuffix="/qemu"
+@@ -644,7 +645,9 @@ for opt do
+ ;;
+ --sysconfdir=*) sysconfdir="$optarg"
+ ;;
+- --sbindir=*|--libexecdir=*|--sharedstatedir=*|--localstatedir=*|\
++ --libexecdir=*) libexecdir="$optarg"
++ ;;
++ --sbindir=*|--sharedstatedir=*|--localstatedir=*|\
+ --oldincludedir=*|--datarootdir=*|--infodir=*|--localedir=*|\
+ --htmldir=*|--dvidir=*|--pdfdir=*|--psdir=*)
+ # These switches are silently ignored, for compatibility with
+@@ -3190,8 +3193,8 @@ echo "sysconfdir=$sysconfdir" >> $config
+ echo "qemu_confdir=$qemu_confdir" >> $config_host_mak
+ echo "qemu_datadir=$qemu_datadir" >> $config_host_mak
+ echo "qemu_docdir=$qemu_docdir" >> $config_host_mak
+-echo "libexecdir=\${prefix}/libexec" >> $config_host_mak
+-echo "CONFIG_QEMU_HELPERDIR=\"$prefix/libexec\"" >> $config_host_mak
++echo "libexecdir=$libexecdir" >> $config_host_mak
++echo "CONFIG_QEMU_HELPERDIR=$libexecdir" >> $config_host_mak
+
+ echo "ARCH=$ARCH" >> $config_host_mak
+ if test "$debug_tcg" = "yes" ; then
diff --git a/meta/recipes-devtools/qemu/qemu_1.2.0.bb b/meta/recipes-devtools/qemu/qemu_1.2.0.bb
index 517a74b..5cc142a 100644
--- a/meta/recipes-devtools/qemu/qemu_1.2.0.bb
+++ b/meta/recipes-devtools/qemu/qemu_1.2.0.bb
@@ -13,11 +13,12 @@ SRC_URI = "\
file://fallback-to-safe-mmap_min_addr.patch \
file://larger_default_ram_size.patch \
file://arm-bgr.patch \
+ file://remove-hardcoded-libexec.patch \
"
SRC_URI[md5sum] = "78eb1e984f4532aa9f2bdd3c127b5b61"
SRC_URI[sha256sum] = "c8b84420d9f4869397f84cad2dabd9a475b7723d619a924a873740353e9df936"
-PR = "r3"
+PR = "r4"
SRC_URI_append_virtclass-nativesdk = "\
file://relocatable_sdk.patch \
--
1.7.9.5
reply other threads:[~2012-10-17 17:05 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1350492675-29611-1-git-send-email-sgw@linux.intel.com \
--to=sgw@linux.intel.com \
--cc=openembedded-core@lists.openembedded.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox