Openembedded Core Discussions
 help / color / mirror / Atom feed
From: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
To: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Cc: openembedded-core@lists.openembedded.org
Subject: Re: [PATCH 0/2] Multi-threaded RPM support
Date: Thu, 01 Jun 2017 11:52:00 -0500	[thread overview]
Message-ID: <1496335920.26945.80.camel@linux.intel.com> (raw)
In-Reply-To: <cover.1496329361.git.alexander.kanavin@linux.intel.com>

On Thu, 2017-06-01 at 18:15 +0300, Alexander Kanavin wrote:
> These two patches add multi-threaded features to RPM to speed up the do_package_write_rpm task.
> 
> Specifically:
> 
> 1) Multi-threaded xz compressor is used instead of default single-threaded gz. This has the most
> dramatic effect when a recipe produces a smaller number of large-sized packages.
> 
> 2) Packages creation is run in multiple threads via thread pools. This is most beneficial when
> a recipe produces a large amount of small packages.
> 
> Some not very scientific benchmarks for time and .rpm sizes
> (time is measured for do_package_write_rpm tasks only):
> 
> webkitgtk
> before: 9m22s 1550M
> after: 1m50s 858M
> 
> glibc-locale
> before: 3m2s 125M
> after: 40s 56M
> 
> glibc
> before: 56s 54M
> after: 23s 38M
> 
> perl
> before: 1m19s 63M
> after: 55s 42M
> 
> python3
> before: 40s 38M
> after: 28s 24M

it is interesting to see that perl and python does not benefit 'much'.
buildstats should give us a better picture per recipe.

Leo


> 
> The following changes since commit bd063fa288b49b6e3ea77982d0ccc46610feb1ad:
> 
>   tune-mips32*.inc: use consistent comments across all three .inc files (2017-05-30 10:15:20 +0100)
> 
> are available in the git repository at:
> 
>   git://git.yoctoproject.org/poky-contrib akanavin/parallel-rpm
>   http://git.yoctoproject.org/cgit.cgi/poky-contrib/log/?h=akanavin/parallel-rpm
> 
> Alexander Kanavin (2):
>   package_rpm.bbclass: use multithreaded xz compression
>   rpm: run binary package generation via thread pools
> 
>  meta/classes/package_rpm.bbclass                   |   2 +
>  ...y-package-building-into-a-separate-functi.patch |  83 ++++++++
>  ...-binary-package-creation-via-thread-pools.patch | 137 +++++++++++++
>  ...c-make-operations-over-string-pools-threa.patch | 209 +++++++++++++++++++
>  ...c-remove-static-local-variables-from-buil.patch | 227 +++++++++++++++++++++
>  meta/recipes-devtools/rpm/rpm_git.bb               |   4 +
>  6 files changed, 662 insertions(+)
>  create mode 100644 meta/recipes-devtools/rpm/files/0001-Split-binary-package-building-into-a-separate-functi.patch
>  create mode 100644 meta/recipes-devtools/rpm/files/0002-Run-binary-package-creation-via-thread-pools.patch
>  create mode 100644 meta/recipes-devtools/rpm/files/0003-rpmstrpool.c-make-operations-over-string-pools-threa.patch
>  create mode 100644 meta/recipes-devtools/rpm/files/0004-build-pack.c-remove-static-local-variables-from-buil.patch
> 
> -- 
> 2.11.0
> 




  parent reply	other threads:[~2017-06-01 16:43 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-06-01 15:15 [PATCH 0/2] Multi-threaded RPM support Alexander Kanavin
2017-06-01 15:15 ` [PATCH 1/2] package_rpm.bbclass: use multithreaded xz compression Alexander Kanavin
2017-06-01 17:11   ` Mark Hatle
2017-06-01 17:44     ` Alexander Kanavin
2017-06-01 19:02   ` Andre McCurdy
2017-06-02 11:40     ` Alexander Kanavin
2017-06-02 18:33       ` Andre McCurdy
2017-06-01 15:15 ` [PATCH 2/2] rpm: run binary package generation via thread pools Alexander Kanavin
2017-06-01 16:02   ` Alexander Kanavin
2017-06-02 12:44     ` Alexander Kanavin
2017-06-01 16:52 ` Leonardo Sandoval [this message]
2017-06-01 17:13   ` [PATCH 0/2] Multi-threaded RPM support Mark Hatle
2017-06-01 17:37     ` Alexander Kanavin
2017-06-02 21:41       ` Leonardo Sandoval
2017-06-02 22:20 ` Richard Purdie
2017-06-04 14:15 ` Richard Purdie
2017-06-05 12:14   ` Alexander Kanavin
2017-06-05 12:41     ` Alexander Kanavin
2017-06-05 13:01     ` Burton, Ross
2017-06-05 13:15       ` Alexander Kanavin
2017-06-05 13:21     ` Joshua Lock
2017-06-05 13:34       ` Alexander Kanavin
2017-06-05 13:47         ` Davis, Michael
2017-06-05 14:00           ` Alexander Kanavin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1496335920.26945.80.camel@linux.intel.com \
    --to=leonardo.sandoval.gonzalez@linux.intel.com \
    --cc=alexander.kanavin@linux.intel.com \
    --cc=openembedded-core@lists.openembedded.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox