On Thu, Apr 18, 2013 at 09:00:43PM +0200, Martin Jansa wrote: > On Wed, Apr 17, 2013 at 11:02:15AM +0200, Martin Jansa wrote: > > On Tue, Apr 16, 2013 at 05:59:53PM -0700, Khem Raj wrote: > > > > > > On Apr 16, 2013, at 2:28 PM, Richard Purdie wrote: > > > > > > > On Tue, 2013-04-16 at 14:30 +0200, Martin Jansa wrote: > > > >> * with external toolchain I have different HOST_PREFIX and HOST_SYS > > > >> AC_PATH_TOOL is using HOST_SYS as prefix and fails to find objcopy > > > >> then it tries objcopy without prefix which is found on host, but > > > >> that objcopy does not work for arm libs > > > >> * with internal toolchain gperf is not prefixed with HOST_PREFIX, but > > > >> fallback to "gperf" only finds the one in native sysroot first > > > >> * based on http://lists.linuxtogo.org/pipermail/openembedded-core/2013-April/037985.html > > > >> Khem suggested to export strings and gperf from bitbake.conf instead > > > >> > > > >> Signed-off-by: Martin Jansa > > > >> --- > > > >> meta/conf/bitbake.conf | 2 ++ > > > >> ...se-AC_CHECK_TOOL-for-objcopy-strings-and-.patch | 41 ++++++++++++++++++++++ > > > >> meta/recipes-core/systemd/systemd_199.bb | 1 + > > > >> 3 files changed, 44 insertions(+) > > > >> create mode 100644 meta/recipes-core/systemd/systemd/0001-configure-use-AC_CHECK_TOOL-for-objcopy-strings-and-.patch > > > >> > > > >> diff --git a/meta/conf/bitbake.conf b/meta/conf/bitbake.conf > > > >> index cd5d61e..a84ae38 100644 > > > >> --- a/meta/conf/bitbake.conf > > > >> +++ b/meta/conf/bitbake.conf > > > >> @@ -455,6 +455,8 @@ export RANLIB = "${HOST_PREFIX}ranlib" > > > >> export STRIP = "${HOST_PREFIX}strip" > > > >> export OBJCOPY = "${HOST_PREFIX}objcopy" > > > >> export OBJDUMP = "${HOST_PREFIX}objdump" > > > >> +export STRINGS = "${HOST_PREFIX}strings" > > > >> +export GPERF = "${HOST_PREFIX}gperf" > > > >> export NM = "${HOST_PREFIX}nm" > > > >> PYTHON = "${@sys.executable}" > > > > > > > > At this point in the release cycle I'm not adding new global exports to > > > > ever piece of software in the system. I appreciate in theory nothing bad > > > > should happen however the reality is sometimes different :/. I'm taking > > > > a *lot* of risks in including as many changes as I have, I don't want to > > > > add this one too. > > > > > > > > I'm also not sure its a good idea in general to build up more exports in > > > > bitbake.conf if we haven't yet needed them. > > > > > > > > > > We can not be certain we did not need them autoconfed packages will default to one on host > > > so it might be that many recipes have been wrongly using non-cross version of tools and succeeding > > > the build. Problem is there in though. > > > > > > I think on master this patch should be considered as such > > > > > > > I'll take a version of this which does this in the systemd recipe. > > > > > > For dylan this seems ok > > > > I have patch moving exports to bitbake.conf in my local tree, I'll send > > it for master after dylan is released. > > It was good call to keep it local for systemd in dylan > > x86_64-oe-linux-gperf: No such file or directory > in webkit-efl and kconfig-frontends > | sh: 1: x86_64-oe-linux-gperf: not found > | calling gperf failed: 32512 at /home/jenkins/oe/shr-core-branches/shr-core/tmp-eglibc/work/x86_64-oe-linux/webkit-efl/1.9.3+svnr120144-r2/src/Source/WebCore/make-hash-tools.pl line 36. > > x86_64-oe-linux-strings: No such file or directory > in tcp-wrappers, interestingly in gcc call: > > | x86_64-oe-linux-gcc -m64 > --sysroot=/home/jenkins/oe/shr-core-branches/shr-core/tmp-eglibc/sysroots/qemux86-64 > -DFACILITY=LOG_DAEMON -DHOSTS_ACCESS -DNETGROUP -DUSE_GETDOMAIN > -DDAEMON_UMASK=022 -DREAL_DAEMON_DIR=\"/usr/sbin\" -DPROCESS_OPTIONS > -DKILL_IP_OPTIONS -DSEVERITY=LOG_INFO -DRFC931_TIMEOUT=10 > -DHOSTS_DENY=\"/etc/hosts.deny\" -DHOSTS_ALLOW=\"/etc/hosts.allow\" > x86_64-oe-linux-strings -O2 -pipe -g -feliminate-unused-debug-types > -DSYS_ERRLIST_DEFINED -DHAVE_STRERROR -DHAVE_WEAKSYMS -D_REENTRANT > -DINET6=1 -Dss_family=__ss_family -Dss_len=__ss_len -o tcpd.o -c > tcpd.c > | x86_64-oe-linux-gcc: error: x86_64-oe-linux-strings: No such file or > directory I have fix for tcp-wrappers (oe-core-contrib/jansa/gperf), but gperf looks a bit more complicated and maybe not right to export it with ${HOST_PREFIX} In that external-toolchain I have it's indeed prefixed with ${HOST_PREFIX} and that change in systemd's configure.ac allows to find it. When I was testing it with internal toolchain, I've seen that in systemd/config.log I also have configure:18082: checking for gperf configure:18100: found /OE/shr-core/tmp-eglibc/sysroots/x86_64-linux/usr/bin/gperf configure:18112: result: /OE/shr-core/tmp-eglibc/sysroots/x86_64-linux/usr/bin/gperf -> so it works correctly for unprefixed gperf (internal toolchain) too. But now the same fix for kconfig-frontends wasn't working and I've found that systemd checks for gperf twice AC_CHECK_TOOL(GPERF, gperf) if test -z "$GPERF" ; then AC_MSG_ERROR([*** gperf not found]) fi and a bit later AS_IF([test "x$enable_keymap" = "xyes"], [ AC_PATH_PROG([GPERF], [gperf]) if test -z "$GPERF"; then AC_MSG_ERROR([gperf is needed]) fi And this 2nd check is what allows it to find unprefixed gperf. So one way is to export unprefixed gperf (or not export at all from bitbake.conf) and let external-toolchain.inc to export it if it provides prefixed gperf or fix kconfig-frontends and webkit-efl to check for exported and then fallback to checking gperf without prefix. Cheers, > > > >> diff --git a/meta/recipes-core/systemd/systemd/0001-configure-use-AC_CHECK_TOOL-for-objcopy-strings-and-.patch b/meta/recipes-core/systemd/systemd/0001-configure-use-AC_CHECK_TOOL-for-objcopy-strings-and-.patch > > > >> new file mode 100644 > > > >> index 0000000..d847bbc > > > >> --- /dev/null > > > >> +++ b/meta/recipes-core/systemd/systemd/0001-configure-use-AC_CHECK_TOOL-for-objcopy-strings-and-.patch > > > >> @@ -0,0 +1,41 @@ > > > >> +From d6f92bcbbae9a577adb9588c7b2783a5d0bf343d Mon Sep 17 00:00:00 2001 > > > >> +From: Martin Jansa > > > >> +Date: Tue, 16 Apr 2013 14:20:41 +0200 > > > >> +Subject: [PATCH] configure: use AC_CHECK_TOOL for objcopy, strings and gperf > > > >> + > > > >> +* using AC_PATH_TOOL does not allow to override it from shell environment > > > >> + which is useful when cross-compiling > > > >> +* with external toolchain I have different HOST_PREFIX and HOST_SYS > > > >> + AC_PATH_TOOL is using HOST_SYS as prefix and fails to find objcopy > > > >> + which is available only as ${TARGET_PREFIX}objcopy then it tries > > > >> + objcopy without prefix which is found on host, but that objcopy > > > >> + does not work for !host (e.g. arm when building on x86) libs > > > >> + > > > >> +Signed-off-by: Martin Jansa > > > >> +Upstream-Status: Submitted > > > >> +http://lists.freedesktop.org/archives/systemd-devel/2013-April/010468.html > > > >> + > > > >> +--- > > > >> + configure.ac | 6 +++--- > > > >> + 1 file changed, 3 insertions(+), 3 deletions(-) > > > >> + > > > >> +diff --git a/configure.ac b/configure.ac > > > >> +index 33b0ca9..519f1a9 100644 > > > >> +--- a/configure.ac > > > >> ++++ b/configure.ac > > > >> +@@ -86,9 +86,9 @@ GOBJECT_INTROSPECTION_CHECK([1.31.1]) > > > >> + AM_CONDITIONAL([HAVE_INTROSPECTION], [false]) > > > >> + enable_introspection=no]) > > > >> + > > > >> +-AC_PATH_TOOL(OBJCOPY, objcopy) > > > >> +-AC_PATH_TOOL(STRINGS, strings) > > > >> +-AC_PATH_TOOL(GPERF, gperf) > > > >> ++AC_CHECK_TOOL(OBJCOPY, objcopy) > > > >> ++AC_CHECK_TOOL(STRINGS, strings) > > > >> ++AC_CHECK_TOOL(GPERF, gperf) > > > >> + if test -z "$GPERF" ; then > > > >> + AC_MSG_ERROR([*** gperf not found]) > > > >> + fi > > > >> +-- > > > >> +1.8.1.5 > > > >> + > > > >> diff --git a/meta/recipes-core/systemd/systemd_199.bb b/meta/recipes-core/systemd/systemd_199.bb > > > >> index d22df12..e8ad8f5 100644 > > > >> --- a/meta/recipes-core/systemd/systemd_199.bb > > > >> +++ b/meta/recipes-core/systemd/systemd_199.bb > > > >> @@ -27,6 +27,7 @@ SRC_URI = "http://www.freedesktop.org/software/systemd/systemd-${PV}.tar.xz \ > > > >> file://0002-readahead-chunk-on-spinning-media.patch \ > > > >> file://0003-readahead-cleanups.patch \ > > > >> file://0013-systemd-sysctl-Handle-missing-etc-sysctl.conf-proper.patch \ > > > >> + file://0001-configure-use-AC_CHECK_TOOL-for-objcopy-strings-and-.patch \ > > > >> file://199-firmware.patch \ > > > >> file://init \ > > > >> " > > > > > > > > > > > > > > > > _______________________________________________ > > > > Openembedded-core mailing list > > > > Openembedded-core@lists.openembedded.org > > > > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core > > > > > > > -- > > Martin 'JaMa' Jansa jabber: Martin.Jansa@gmail.com > > > > -- > Martin 'JaMa' Jansa jabber: Martin.Jansa@gmail.com -- Martin 'JaMa' Jansa jabber: Martin.Jansa@gmail.com