From: Martin Jansa <martin.jansa@gmail.com>
To: Richard Purdie <richard.purdie@linuxfoundation.org>
Cc: Patches and discussions about the oe-core layer
<openembedded-core@lists.openembedded.org>
Subject: Re: [PATCH 0/7] systemd-211 upgrade and uclibc fixes
Date: Mon, 17 Mar 2014 23:05:52 +0100 [thread overview]
Message-ID: <20140317220552.GK3725@jama> (raw)
In-Reply-To: <1395093175.3808.54.camel@ted>
[-- Attachment #1: Type: text/plain, Size: 3286 bytes --]
On Mon, Mar 17, 2014 at 09:52:55PM +0000, Richard Purdie wrote:
> On Mon, 2014-03-17 at 09:06 -0700, Khem Raj wrote:
> > On Mon, Mar 17, 2014 at 4:31 AM, Richard Purdie
> > <richard.purdie@linuxfoundation.org> wrote:
> > > On Sat, 2014-03-15 at 22:42 -0700, Khem Raj wrote:
> > >> Finally, managed to get systemd 211 to boot on uclibc and eglibc
> > >> on all supported qemu machines, this should fix bug #5940
> > >>
> > >> Additional functionality in uclibc is needed to support this
> > >> systemd
> > >>
> > >> gnutls, glib-2.0, intltool fixes are uclibc specific and are needed
> > >> to get uclibc images going
> > >>
> > >> util-linux fix is moulded to support uclibc
> > >>
> > >> I have been testing this fix on the qemuarm/qemuppc/qemumips/qemux86/qemux86-64
> > >> on both uclibc/eglibc images and its been working good.
> > >>
> > >> The following changes since commit 58aae40bbf8edd9c5ca70b2094eeb724391f1993:
> > >>
> > >> eglibc: Update SRC_URI to point to final download location (2014-03-13 20:44:48 -0700)
> > >>
> > >> are available in the git repository at:
> > >>
> > >> git://git.openembedded.org/openembedded-core-contrib kraj/systemd-211
> > >> http://cgit.openembedded.org/cgit.cgi/openembedded-core-contrib/log/?h=kraj/systemd-211
> > >>
> > >> Khem Raj (7):
> > >> uclibc: Implement clock_adjtime()
> > >> uclibc: Remove iconv.h
> > >> gnutls: Link in pthread explicitly for uclibc
> > >> glib-2.0: Fix localedir expectations for uclibc
> > >> util-linux: scanf_cv_alloc_modifier changed from 'as' -> 'ms'
> > >> intltool: Define DATADIRNAME=share for uclibc based systems
> > >> Upgrade to systemd 211+
> > >
> > > I tried this on the autobuilder, with and without the pulseaudio 4->5
> > > upgrade. The result was:
> > >
> > > http://autobuilder.yoctoproject.org/main/builders/nightly-qa-systemd/builds/111
> > > http://autobuilder.yoctoproject.org/main/builders/nightly-qa-systemd/builds/112
> > >
> > > so I'm afraid I can't take the systemd part of this series. Its getting
> > > late in the cycle for a pulseaudio 4->5 upgrade too :/
> >
> > I was fighting with runtime issues than the build time so I was
> > building minimal images for quick debug/test cycles.
> > my bad since I kept pulseaudio out of this pull request the systemd
> > patch that Martin had
> > was also left out.
> >
> >
> > >
> > > Does anyone have any strong opinions on this?
> >
> > Give it a shot, if you can otherwise it can wait, 208 still shows
> > issues with journald where journal
> > sometimes misses chunks of logs of chatty daemons for an interval of
> > time after few hours of running, I haven't seen this issue with 211
> > yet so this is an improvement.
> > however 208 will keep getting fixes it probably isnt a bad choice to
> > stick with for this release.
>
> FWIW Martin's patch showed a green build. I'm therefore more widely
> testing that combination.
I should say that my pulseaudio change was also motivated mostly to get
green build and to allow me to flash new image on my MACHINEs, and test systemd
in runtime, but then I don't use pulseaudio in runtime, so it wasn't properly
tested there.
--
Martin 'JaMa' Jansa jabber: Martin.Jansa@gmail.com
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 205 bytes --]
next prev parent reply other threads:[~2014-03-17 22:05 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-16 5:42 [PATCH 0/7] systemd-211 upgrade and uclibc fixes Khem Raj
2014-03-16 5:42 ` [PATCH 1/7] uclibc: Implement clock_adjtime() Khem Raj
2014-03-16 5:42 ` [PATCH 2/7] uclibc: Remove iconv.h Khem Raj
2014-03-16 5:42 ` [PATCH 3/7] gnutls: Link in pthread explicitly for uclibc Khem Raj
2014-03-16 5:42 ` [PATCH 4/7] glib-2.0: Fix localedir expectations " Khem Raj
2014-03-18 11:13 ` Burton, Ross
2014-03-18 14:19 ` Khem Raj
2014-03-16 5:42 ` [PATCH 5/7] util-linux: scanf_cv_alloc_modifier changed from 'as' -> 'ms' Khem Raj
2014-03-26 1:19 ` Robert Yang
2014-03-26 1:20 ` Khem Raj
2014-03-26 3:33 ` Robert Yang
2014-03-26 3:47 ` Khem Raj
2014-03-26 5:05 ` Robert Yang
2014-03-16 5:42 ` [PATCH 6/7] intltool: Define DATADIRNAME=share for uclibc based systems Khem Raj
2014-03-16 5:42 ` [PATCH 7/7] Upgrade to systemd 211+ Khem Raj
2014-03-17 11:31 ` [PATCH 0/7] systemd-211 upgrade and uclibc fixes Richard Purdie
2014-03-17 11:41 ` Martin Jansa
2014-03-17 12:29 ` Richard Purdie
2014-03-17 16:06 ` Khem Raj
2014-03-17 21:52 ` Richard Purdie
2014-03-17 22:05 ` Martin Jansa [this message]
2014-03-17 22:42 ` Khem Raj
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140317220552.GK3725@jama \
--to=martin.jansa@gmail.com \
--cc=openembedded-core@lists.openembedded.org \
--cc=richard.purdie@linuxfoundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox