From: Trevor Woerner <twoerner@gmail.com>
To: openembedded-core@lists.openembedded.org
Subject: Re: npm thoughts
Date: Tue, 28 Feb 2017 13:19:24 -0500 [thread overview]
Message-ID: <20170228181924.GC16277@linux-uys3> (raw)
In-Reply-To: <20170228045004.GA5913@linux-uys3>
In face-to-face conversations there was an expressed opinion that it would be
great if npm had a "--dry-run" -type option to list off the dependencies of a
package.json file.
As it turns out, it does!
$ npm install --dry-run
electron-quick-start@1.0.0 /z/npm/source/electron-quick-start.git
└─┬ electron@1.4.15
├─┬ electron-download@3.3.0
│ ├─┬ debug@2.6.1
│ │ └── ms@0.7.2
│ ├─┬ fs-extra@0.30.0
│ │ ├── graceful-fs@4.1.11
│ │ ├── jsonfile@2.4.0
│ │ ├── klaw@1.3.1
│ │ ├── path-is-absolute@1.0.1
│ │ └─┬ rimraf@2.6.1
│ │ └─┬ glob@7.1.1
│ │ ├── fs.realpath@1.0.0
│ │ ├─┬ inflight@1.0.6
│ │ │ └── wrappy@1.0.2
│ │ ├─┬ minimatch@3.0.3
│ │ │ └─┬ brace-expansion@1.1.6
│ │ │ ├── balanced-match@0.4.2
│ │ │ └── concat-map@0.0.1
│ │ └── once@1.4.0
│ ├── home-path@1.0.3
│ ├── minimist@1.2.0
│ ├─┬ nugget@2.0.1
│ │ ├─┬ pretty-bytes@1.0.4
│ │ │ ├── get-stdin@4.0.1
│ │ │ └─┬ meow@3.7.0
│ │ │ ├─┬ camelcase-keys@2.1.0
│ │ │ │ └── camelcase@2.1.1
│ │ │ ├── decamelize@1.2.0
│ │ │ ├─┬ loud-rejection@1.6.0
│ │ │ │ ├─┬ currently-unhandled@0.4.1
│ │ │ │ │ └── array-find-index@1.0.2
│ │ │ │ └── signal-exit@3.0.2
│ │ │ ├── map-obj@1.0.1
│ │ │ ├─┬ normalize-package-data@2.3.5
│ │ │ │ ├── hosted-git-info@2.2.0
│ │ │ │ ├─┬ is-builtin-module@1.0.0
│ │ │ │ │ └── builtin-modules@1.1.1
│ │ │ │ └─┬ validate-npm-package-license@3.0.1
│ │ │ │ ├─┬ spdx-correct@1.0.2
│ │ │ │ │ └── spdx-license-ids@1.2.2
│ │ │ │ └── spdx-expression-parse@1.0.4
│ │ │ ├── object-assign@4.1.1
│ │ │ ├─┬ read-pkg-up@1.0.1
│ │ │ │ ├── find-up@1.1.2
│ │ │ │ └─┬ read-pkg@1.1.0
│ │ │ │ ├─┬ load-json-file@1.1.0
│ │ │ │ │ ├─┬ parse-json@2.2.0
│ │ │ │ │ │ └─┬ error-ex@1.3.0
│ │ │ │ │ │ └── is-arrayish@0.2.1
│ │ │ │ │ ├── pify@2.3.0
│ │ │ │ │ └─┬ strip-bom@2.0.0
│ │ │ │ │ └── is-utf8@0.2.1
│ │ │ │ └── path-type@1.1.0
│ │ │ ├─┬ redent@1.0.0
│ │ │ │ ├─┬ indent-string@2.1.0
│ │ │ │ │ └─┬ repeating@2.0.1
│ │ │ │ │ └── is-finite@1.0.2
│ │ │ │ └── strip-indent@1.0.1
│ │ │ └── trim-newlines@1.0.0
│ │ ├─┬ progress-stream@1.2.0
│ │ │ ├── speedometer@0.1.4
│ │ │ └─┬ through2@0.2.3
│ │ │ ├─┬ readable-stream@1.1.14
│ │ │ │ └── isarray@0.0.1
│ │ │ └─┬ xtend@2.1.2
│ │ │ └── object-keys@0.4.0
│ │ ├─┬ request@2.79.0
│ │ │ ├── aws-sign2@0.6.0
│ │ │ ├── aws4@1.6.0
│ │ │ ├── caseless@0.11.0
│ │ │ ├─┬ combined-stream@1.0.5
│ │ │ │ └── delayed-stream@1.0.0
│ │ │ ├── extend@3.0.0
│ │ │ ├── forever-agent@0.6.1
│ │ │ ├─┬ form-data@2.1.2
│ │ │ │ └── asynckit@0.4.0
│ │ │ ├─┬ har-validator@2.0.6
│ │ │ │ ├─┬ chalk@1.1.3
│ │ │ │ │ ├── ansi-styles@2.2.1
│ │ │ │ │ ├── escape-string-regexp@1.0.5
│ │ │ │ │ ├── has-ansi@2.0.0
│ │ │ │ │ └── supports-color@2.0.0
│ │ │ │ ├─┬ commander@2.9.0
│ │ │ │ │ └── graceful-readlink@1.0.1
│ │ │ │ └─┬ is-my-json-valid@2.16.0
│ │ │ │ ├── generate-function@2.0.0
│ │ │ │ ├─┬ generate-object-property@1.2.0
│ │ │ │ │ └── is-property@1.0.2
│ │ │ │ ├── jsonpointer@4.0.1
│ │ │ │ └── xtend@4.0.1
│ │ │ ├─┬ hawk@3.1.3
│ │ │ │ ├── boom@2.10.1
│ │ │ │ ├── cryptiles@2.0.5
│ │ │ │ ├── hoek@2.16.3
│ │ │ │ └── sntp@1.0.9
│ │ │ ├─┬ http-signature@1.1.1
│ │ │ │ ├── assert-plus@0.2.0
│ │ │ │ ├─┬ jsprim@1.3.1
│ │ │ │ │ ├── extsprintf@1.0.2
│ │ │ │ │ ├── json-schema@0.2.3
│ │ │ │ │ └── verror@1.3.6
│ │ │ │ └─┬ sshpk@1.10.2
│ │ │ │ ├── asn1@0.2.3
│ │ │ │ ├── assert-plus@1.0.0
│ │ │ │ ├── bcrypt-pbkdf@1.0.1
│ │ │ │ ├─┬ dashdash@1.14.1
│ │ │ │ │ └── assert-plus@1.0.0
│ │ │ │ ├── ecc-jsbn@0.1.1
│ │ │ │ ├─┬ getpass@0.1.6
│ │ │ │ │ └── assert-plus@1.0.0
│ │ │ │ ├── jodid25519@1.0.2
│ │ │ │ ├── jsbn@0.1.1
│ │ │ │ └── tweetnacl@0.14.5
│ │ │ ├── is-typedarray@1.0.0
│ │ │ ├── isstream@0.1.2
│ │ │ ├── json-stringify-safe@5.0.1
│ │ │ ├─┬ mime-types@2.1.14
│ │ │ │ └── mime-db@1.26.0
│ │ │ ├── oauth-sign@0.8.2
│ │ │ ├── qs@6.3.1
│ │ │ ├── stringstream@0.0.5
│ │ │ ├─┬ tough-cookie@2.3.2
│ │ │ │ └── punycode@1.4.1
│ │ │ ├── tunnel-agent@0.4.3
│ │ │ └── uuid@3.0.1
│ │ ├─┬ single-line-log@1.1.2
│ │ │ └─┬ string-width@1.0.2
│ │ │ ├── code-point-at@1.1.0
│ │ │ ├─┬ is-fullwidth-code-point@1.0.0
│ │ │ │ └── number-is-nan@1.0.1
│ │ │ └─┬ strip-ansi@3.0.1
│ │ │ └── ansi-regex@2.1.1
│ │ └── throttleit@0.0.2
│ ├─┬ path-exists@2.1.0
│ │ └─┬ pinkie-promise@2.0.1
│ │ └── pinkie@2.0.4
│ ├─┬ rc@1.1.7
│ │ ├── deep-extend@0.4.1
│ │ ├── ini@1.3.4
│ │ └── strip-json-comments@2.0.1
│ ├── semver@5.3.0
│ └─┬ sumchecker@1.3.0
│ └── es6-promise@4.0.5
└─┬ extract-zip@1.6.0
├─┬ concat-stream@1.5.0
│ ├── inherits@2.0.3
│ ├─┬ readable-stream@2.0.6
│ │ ├── core-util-is@1.0.2
│ │ ├── isarray@1.0.0
│ │ ├── process-nextick-args@1.0.7
│ │ ├── string_decoder@0.10.31
│ │ └── util-deprecate@1.0.2
│ └── typedarray@0.0.6
├── debug@0.7.4
├─┬ mkdirp@0.5.0
│ └── minimist@0.0.8
└─┬ yauzl@2.4.1
└─┬ fd-slicer@1.0.1
└── pend@1.2.0
next prev parent reply other threads:[~2017-02-28 18:19 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-28 4:50 npm thoughts Trevor Woerner
2017-02-28 16:56 ` Trevor Woerner
2017-02-28 18:00 ` Trevor Woerner
2017-03-03 10:26 ` Josef Holzmayr
2017-03-06 7:24 ` Anders Darander
2017-02-28 18:19 ` Trevor Woerner [this message]
2017-03-03 10:45 ` Josef Holzmayr
2017-03-03 10:57 ` Alexander Kanavin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170228181924.GC16277@linux-uys3 \
--to=twoerner@gmail.com \
--cc=openembedded-core@lists.openembedded.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox