From: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
To: openembedded-core@lists.openembedded.org
Subject: [PATCH][krogoth] initrdscripts/init-install*: Add rootwait when installing to USB devices
Date: Tue, 20 Jun 2017 16:45:51 -0500 [thread overview]
Message-ID: <20170620214551.11550-1-alejandro.hernandez@linux.intel.com> (raw)
From: California Sullivan <california.l.sullivan@intel.com>
It can take a bit for USB devices to be detected, so if a USB device is
your rootfs and you don't set rootwait you will most likely get a kernel
panic. Fix this by adding rootwait to the kernel command line on
installation.
Fixes [YOCTO #9462].
(From OE-Core rev: 40e2d36573a7a6bce377b1f9653607065ba5ffb6)
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
---
meta/recipes-core/initrdscripts/files/init-install-efi.sh | 6 ++++++
meta/recipes-core/initrdscripts/files/init-install.sh | 5 +++++
2 files changed, 11 insertions(+)
diff --git a/meta/recipes-core/initrdscripts/files/init-install-efi.sh b/meta/recipes-core/initrdscripts/files/init-install-efi.sh
index f564f4e2d6a..bf8a76b96bb 100644
--- a/meta/recipes-core/initrdscripts/files/init-install-efi.sh
+++ b/meta/recipes-core/initrdscripts/files/init-install-efi.sh
@@ -144,6 +144,12 @@ if [ ! "${device#/dev/mmcblk}" = "${device}" ]; then
part_prefix="p"
rootwait="rootwait"
fi
+
+# USB devices also require rootwait
+if [ -n `readlink /dev/disk/by-id/usb* | grep $TARGET_DEVICE_NAME` ]; then
+ rootwait="rootwait"
+fi
+
bootfs=${device}${part_prefix}1
rootfs=${device}${part_prefix}2
swap=${device}${part_prefix}3
diff --git a/meta/recipes-core/initrdscripts/files/init-install.sh b/meta/recipes-core/initrdscripts/files/init-install.sh
index 72ce92b9640..5f2599e7242 100644
--- a/meta/recipes-core/initrdscripts/files/init-install.sh
+++ b/meta/recipes-core/initrdscripts/files/init-install.sh
@@ -152,6 +152,11 @@ if [ ! "${device#/dev/mmcblk}" = "${device}" ]; then
rootwait="rootwait"
fi
+# USB devices also require rootwait
+if [ -n `readlink /dev/disk/by-id/usb* | grep $TARGET_DEVICE_NAME` ]; then
+ rootwait="rootwait"
+fi
+
if [ $grub_version -eq 0 ] ; then
bios_boot=''
bootfs=${device}${part_prefix}1
--
2.12.2
reply other threads:[~2017-06-20 21:46 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170620214551.11550-1-alejandro.hernandez@linux.intel.com \
--to=alejandro.hernandez@linux.intel.com \
--cc=openembedded-core@lists.openembedded.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox