From: Marek Vasut <marex@denx.de>
To: openembedded-core@lists.openembedded.org
Cc: Marek Vasut <marex@denx.de>,
Andrej Valek <andrej.valek@siemens.com>,
Richard Purdie <richard.purdie@linuxfoundation.org>
Subject: [PATCH] Revert "featimage: refactor style"
Date: Sat, 29 Jan 2022 01:29:07 +0100 [thread overview]
Message-ID: <20220129002907.84534-1-marex@denx.de> (raw)
This reverts commit f44bb458884da64356ee188917094b5515d3b159.
The reverted patch attempted to perform some sort of clean up, however
it only brought in style inconsistencies like this:
```
conf_desc="$conf_desc${sep}setup"
```
The curly brackets around variables were placed in the kernel-fitimage
bbclass deliberately, since when assembling the fitimage ITS there are
multiple variables where it is difficult to identify where the variable
ends and some sort of follow up string starts.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrej Valek <andrej.valek@siemens.com>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
---
meta/classes/kernel-fitimage.bbclass | 289 +++++++++++++--------------
meta/classes/uboot-sign.bbclass | 56 +++---
2 files changed, 171 insertions(+), 174 deletions(-)
diff --git a/meta/classes/kernel-fitimage.bbclass b/meta/classes/kernel-fitimage.bbclass
index b0c971b0eb..1e3bc21f1f 100644
--- a/meta/classes/kernel-fitimage.bbclass
+++ b/meta/classes/kernel-fitimage.bbclass
@@ -73,7 +73,7 @@ FIT_SIGN_INDIVIDUAL ?= "0"
#
# $1 ... .its filename
fitimage_emit_fit_header() {
- cat << EOF >> $1
+ cat << EOF >> ${1}
/dts-v1/;
/ {
@@ -94,24 +94,24 @@ EOF
fitimage_emit_section_maint() {
case $2 in
imagestart)
- cat << EOF >> $1
+ cat << EOF >> ${1}
images {
EOF
;;
confstart)
- cat << EOF >> $1
+ cat << EOF >> ${1}
configurations {
EOF
;;
sectend)
- cat << EOF >> $1
+ cat << EOF >> ${1}
};
EOF
;;
fitend)
- cat << EOF >> $1
+ cat << EOF >> ${1}
};
EOF
;;
@@ -137,28 +137,28 @@ fitimage_emit_section_kernel() {
awk '$3=="${UBOOT_ENTRYSYMBOL}" {print "0x"$1;exit}'`
fi
- cat << EOF >> $1
- kernel-$2 {
+ cat << EOF >> ${1}
+ kernel-${2} {
description = "Linux kernel";
- data = /incbin/("$3");
+ data = /incbin/("${3}");
type = "kernel";
arch = "${UBOOT_ARCH}";
os = "linux";
- compression = "$4";
+ compression = "${4}";
load = <${UBOOT_LOADADDRESS}>;
- entry = <$ENTRYPOINT>;
+ entry = <${ENTRYPOINT}>;
hash-1 {
- algo = "$kernel_csum";
+ algo = "${kernel_csum}";
};
};
EOF
- if [ "${UBOOT_SIGN_ENABLE}" = "1" -a "${FIT_SIGN_INDIVIDUAL}" = "1" -a -n "$kernel_sign_keyname" ] ; then
- sed -i '$ d' $1
- cat << EOF >> $1
+ if [ "${UBOOT_SIGN_ENABLE}" = "1" -a "${FIT_SIGN_INDIVIDUAL}" = "1" -a -n "${kernel_sign_keyname}" ] ; then
+ sed -i '$ d' ${1}
+ cat << EOF >> ${1}
signature-1 {
- algo = "$kernel_csum,$kernel_sign_algo";
- key-name-hint = "$kernel_sign_keyname";
+ algo = "${kernel_csum},${kernel_sign_algo}";
+ key-name-hint = "${kernel_sign_keyname}";
};
};
EOF
@@ -186,26 +186,26 @@ fitimage_emit_section_dtb() {
elif [ -n "${UBOOT_DTB_LOADADDRESS}" ]; then
dtb_loadline="load = <${UBOOT_DTB_LOADADDRESS}>;"
fi
- cat << EOF >> $1
- fdt-$2 {
+ cat << EOF >> ${1}
+ fdt-${2} {
description = "Flattened Device Tree blob";
- data = /incbin/("$3");
+ data = /incbin/("${3}");
type = "flat_dt";
arch = "${UBOOT_ARCH}";
compression = "none";
- $dtb_loadline
+ ${dtb_loadline}
hash-1 {
- algo = "$dtb_csum";
+ algo = "${dtb_csum}";
};
};
EOF
- if [ "${UBOOT_SIGN_ENABLE}" = "1" -a "${FIT_SIGN_INDIVIDUAL}" = "1" -a -n "$dtb_sign_keyname" ] ; then
- sed -i '$ d' $1
- cat << EOF >> $1
+ if [ "${UBOOT_SIGN_ENABLE}" = "1" -a "${FIT_SIGN_INDIVIDUAL}" = "1" -a -n "${dtb_sign_keyname}" ] ; then
+ sed -i '$ d' ${1}
+ cat << EOF >> ${1}
signature-1 {
- algo = "$dtb_csum,$dtb_sign_algo";
- key-name-hint = "$dtb_sign_keyname";
+ algo = "${dtb_csum},${dtb_sign_algo}";
+ key-name-hint = "${dtb_sign_keyname}";
};
};
EOF
@@ -220,29 +220,29 @@ EOF
# $3 ... Path to boot script image
fitimage_emit_section_boot_script() {
- bootscr_csum="${FIT_HASH_ALG}"
+ bootscr_csum="${FIT_HASH_ALG}"
bootscr_sign_algo="${FIT_SIGN_ALG}"
bootscr_sign_keyname="${UBOOT_SIGN_IMG_KEYNAME}"
- cat << EOF >> $1
- bootscr-$2 {
+ cat << EOF >> ${1}
+ bootscr-${2} {
description = "U-boot script";
- data = /incbin/("$3");
+ data = /incbin/("${3}");
type = "script";
arch = "${UBOOT_ARCH}";
compression = "none";
hash-1 {
- algo = "$bootscr_csum";
+ algo = "${bootscr_csum}";
};
};
EOF
- if [ "${UBOOT_SIGN_ENABLE}" = "1" -a "${FIT_SIGN_INDIVIDUAL}" = "1" -a -n "$bootscr_sign_keyname" ] ; then
- sed -i '$ d' $1
- cat << EOF >> $1
+ if [ "${UBOOT_SIGN_ENABLE}" = "1" -a "${FIT_SIGN_INDIVIDUAL}" = "1" -a -n "${bootscr_sign_keyname}" ] ; then
+ sed -i '$ d' ${1}
+ cat << EOF >> ${1}
signature-1 {
- algo = "$bootscr_csum,$bootscr_sign_algo";
- key-name-hint = "$bootscr_sign_keyname";
+ algo = "${bootscr_csum},${bootscr_sign_algo}";
+ key-name-hint = "${bootscr_sign_keyname}";
};
};
EOF
@@ -259,10 +259,10 @@ fitimage_emit_section_setup() {
setup_csum="${FIT_HASH_ALG}"
- cat << EOF >> $1
- setup-$2 {
+ cat << EOF >> ${1}
+ setup-${2} {
description = "Linux setup.bin";
- data = /incbin/("$3");
+ data = /incbin/("${3}");
type = "x86_setup";
arch = "${UBOOT_ARCH}";
os = "linux";
@@ -270,7 +270,7 @@ fitimage_emit_section_setup() {
load = <0x00090000>;
entry = <0x00090000>;
hash-1 {
- algo = "$setup_csum";
+ algo = "${setup_csum}";
};
};
EOF
@@ -297,28 +297,28 @@ fitimage_emit_section_ramdisk() {
ramdisk_entryline="entry = <${UBOOT_RD_ENTRYPOINT}>;"
fi
- cat << EOF >> $1
- ramdisk-$2 {
+ cat << EOF >> ${1}
+ ramdisk-${2} {
description = "${INITRAMFS_IMAGE}";
- data = /incbin/("$3");
+ data = /incbin/("${3}");
type = "ramdisk";
arch = "${UBOOT_ARCH}";
os = "linux";
compression = "none";
- $ramdisk_loadline
- $ramdisk_entryline
+ ${ramdisk_loadline}
+ ${ramdisk_entryline}
hash-1 {
- algo = "$ramdisk_csum";
+ algo = "${ramdisk_csum}";
};
};
EOF
- if [ "${UBOOT_SIGN_ENABLE}" = "1" -a "${FIT_SIGN_INDIVIDUAL}" = "1" -a -n "$ramdisk_sign_keyname" ] ; then
- sed -i '$ d' $1
- cat << EOF >> $1
+ if [ "${UBOOT_SIGN_ENABLE}" = "1" -a "${FIT_SIGN_INDIVIDUAL}" = "1" -a -n "${ramdisk_sign_keyname}" ] ; then
+ sed -i '$ d' ${1}
+ cat << EOF >> ${1}
signature-1 {
- algo = "$ramdisk_csum,$ramdisk_sign_algo";
- key-name-hint = "$ramdisk_sign_keyname";
+ algo = "${ramdisk_csum},${ramdisk_sign_algo}";
+ key-name-hint = "${ramdisk_sign_keyname}";
};
};
EOF
@@ -343,13 +343,13 @@ fitimage_emit_section_config() {
conf_sign_keyname="${UBOOT_SIGN_KEYNAME}"
fi
- its_file="$1"
- kernel_id="$2"
- dtb_image="$3"
- ramdisk_id="$4"
- bootscr_id="$5"
- config_id="$6"
- default_flag="$7"
+ its_file="${1}"
+ kernel_id="${2}"
+ dtb_image="${3}"
+ ramdisk_id="${4}"
+ bootscr_id="${5}"
+ config_id="${6}"
+ default_flag="${7}"
# Test if we have any DTBs at all
sep=""
@@ -364,106 +364,106 @@ fitimage_emit_section_config() {
# conf node name is selected based on dtb ID if it is present,
# otherwise its selected based on kernel ID
- if [ -n "$dtb_image" ]; then
- conf_node=$conf_node$dtb_image
+ if [ -n "${dtb_image}" ]; then
+ conf_node=$conf_node${dtb_image}
else
- conf_node=$conf_node$kernel_id
+ conf_node=$conf_node${kernel_id}
fi
- if [ -n "$kernel_id" ]; then
+ if [ -n "${kernel_id}" ]; then
conf_desc="Linux kernel"
sep=", "
- kernel_line="kernel = \"kernel-$kernel_id\";"
+ kernel_line="kernel = \"kernel-${kernel_id}\";"
fi
- if [ -n "$dtb_image" ]; then
- conf_desc="$conf_desc${sep}FDT blob"
+ if [ -n "${dtb_image}" ]; then
+ conf_desc="${conf_desc}${sep}FDT blob"
sep=", "
- fdt_line="fdt = \"fdt-$dtb_image\";"
+ fdt_line="fdt = \"fdt-${dtb_image}\";"
fi
- if [ -n "$ramdisk_id" ]; then
- conf_desc="$conf_desc${sep}ramdisk"
+ if [ -n "${ramdisk_id}" ]; then
+ conf_desc="${conf_desc}${sep}ramdisk"
sep=", "
- ramdisk_line="ramdisk = \"ramdisk-$ramdisk_id\";"
+ ramdisk_line="ramdisk = \"ramdisk-${ramdisk_id}\";"
fi
- if [ -n "$bootscr_id" ]; then
- conf_desc="$conf_desc${sep}u-boot script"
+ if [ -n "${bootscr_id}" ]; then
+ conf_desc="${conf_desc}${sep}u-boot script"
sep=", "
- bootscr_line="bootscr = \"bootscr-$bootscr_id\";"
+ bootscr_line="bootscr = \"bootscr-${bootscr_id}\";"
fi
- if [ -n "$config_id" ]; then
- conf_desc="$conf_desc${sep}setup"
- setup_line="setup = \"setup-$config_id\";"
+ if [ -n "${config_id}" ]; then
+ conf_desc="${conf_desc}${sep}setup"
+ setup_line="setup = \"setup-${config_id}\";"
fi
- if [ "$default_flag" = "1" ]; then
+ if [ "${default_flag}" = "1" ]; then
# default node is selected based on dtb ID if it is present,
# otherwise its selected based on kernel ID
- if [ -n "$dtb_image" ]; then
- default_line="default = \"conf-$dtb_image\";"
+ if [ -n "${dtb_image}" ]; then
+ default_line="default = \"conf-${dtb_image}\";"
else
- default_line="default = \"conf-$kernel_id\";"
+ default_line="default = \"conf-${kernel_id}\";"
fi
fi
- cat << EOF >> $its_file
- $default_line
+ cat << EOF >> ${its_file}
+ ${default_line}
$conf_node {
- description = "$default_flag $conf_desc";
- $kernel_line
- $fdt_line
- $ramdisk_line
- $bootscr_line
- $setup_line
+ description = "${default_flag} ${conf_desc}";
+ ${kernel_line}
+ ${fdt_line}
+ ${ramdisk_line}
+ ${bootscr_line}
+ ${setup_line}
hash-1 {
- algo = "$conf_csum";
+ algo = "${conf_csum}";
};
EOF
- if [ -n "$conf_sign_keyname" ] ; then
+ if [ ! -z "${conf_sign_keyname}" ] ; then
sign_line="sign-images = "
sep=""
- if [ -n "$kernel_id" ]; then
- sign_line="$sign_line${sep}\"kernel\""
+ if [ -n "${kernel_id}" ]; then
+ sign_line="${sign_line}${sep}\"kernel\""
sep=", "
fi
- if [ -n "$dtb_image" ]; then
- sign_line="$sign_line${sep}\"fdt\""
+ if [ -n "${dtb_image}" ]; then
+ sign_line="${sign_line}${sep}\"fdt\""
sep=", "
fi
- if [ -n "$ramdisk_id" ]; then
- sign_line="$sign_line${sep}\"ramdisk\""
+ if [ -n "${ramdisk_id}" ]; then
+ sign_line="${sign_line}${sep}\"ramdisk\""
sep=", "
fi
- if [ -n "$bootscr_id" ]; then
- sign_line="$sign_line${sep}\"bootscr\""
+ if [ -n "${bootscr_id}" ]; then
+ sign_line="${sign_line}${sep}\"bootscr\""
sep=", "
fi
- if [ -n "$config_id" ]; then
- sign_line="$sign_line${sep}\"setup\""
+ if [ -n "${config_id}" ]; then
+ sign_line="${sign_line}${sep}\"setup\""
fi
- sign_line="$sign_line;"
+ sign_line="${sign_line};"
- cat << EOF >> $its_file
+ cat << EOF >> ${its_file}
signature-1 {
- algo = "$conf_csum,$conf_sign_algo";
- key-name-hint = "$conf_sign_keyname";
- $sign_line
+ algo = "${conf_csum},${conf_sign_algo}";
+ key-name-hint = "${conf_sign_keyname}";
+ ${sign_line}
};
EOF
fi
- cat << EOF >> $its_file
+ cat << EOF >> ${its_file}
};
EOF
}
@@ -478,21 +478,21 @@ fitimage_assemble() {
kernelcount=1
dtbcount=""
DTBS=""
- ramdiskcount=$3
+ ramdiskcount=${3}
setupcount=""
bootscr_id=""
- rm -f $1 arch/${ARCH}/boot/$2
+ rm -f ${1} arch/${ARCH}/boot/${2}
- if [ -n "${UBOOT_SIGN_IMG_KEYNAME}" -a "${UBOOT_SIGN_KEYNAME}" = "${UBOOT_SIGN_IMG_KEYNAME}" ]; then
+ if [ ! -z "${UBOOT_SIGN_IMG_KEYNAME}" -a "${UBOOT_SIGN_KEYNAME}" = "${UBOOT_SIGN_IMG_KEYNAME}" ]; then
bbfatal "Keys used to sign images and configuration nodes must be different."
fi
- fitimage_emit_fit_header $1
+ fitimage_emit_fit_header ${1}
#
# Step 1: Prepare a kernel image section.
#
- fitimage_emit_section_maint $1 imagestart
+ fitimage_emit_section_maint ${1} imagestart
uboot_prep_kimage
fitimage_emit_section_kernel $1 $kernelcount linux.bin "$linux_comp"
@@ -504,9 +504,9 @@ fitimage_assemble() {
if [ -n "${KERNEL_DEVICETREE}" ]; then
dtbcount=1
for DTB in ${KERNEL_DEVICETREE}; do
- if echo $DTB | grep -q '/dts/'; then
- bbwarn "$DTB contains the full path to the the dts file, but only the dtb name should be used."
- DTB=`basename $DTB | sed 's,\.dts$,.dtb,g'`
+ if echo ${DTB} | grep -q '/dts/'; then
+ bbwarn "${DTB} contains the full path to the the dts file, but only the dtb name should be used."
+ DTB=`basename ${DTB} | sed 's,\.dts$,.dtb,g'`
fi
# Skip ${DTB} if it's also provided in ${EXTERNAL_KERNEL_DEVICETREE}
@@ -514,23 +514,23 @@ fitimage_assemble() {
continue
fi
- DTB_PATH="arch/${ARCH}/boot/dts/$DTB"
- if [ ! -e "$DTB_PATH" ]; then
- DTB_PATH="arch/${ARCH}/boot/$DTB"
+ DTB_PATH="arch/${ARCH}/boot/dts/${DTB}"
+ if [ ! -e "${DTB_PATH}" ]; then
+ DTB_PATH="arch/${ARCH}/boot/${DTB}"
fi
- DTB=$(echo "$DTB" | tr '/' '_')
- DTBS="$DTBS $DTB"
- fitimage_emit_section_dtb $1 $DTB $DTB_PATH
+ DTB=$(echo "${DTB}" | tr '/' '_')
+ DTBS="${DTBS} ${DTB}"
+ fitimage_emit_section_dtb ${1} ${DTB} ${DTB_PATH}
done
fi
if [ -n "${EXTERNAL_KERNEL_DEVICETREE}" ]; then
dtbcount=1
for DTB in $(find "${EXTERNAL_KERNEL_DEVICETREE}" \( -name '*.dtb' -o -name '*.dtbo' \) -printf '%P\n' | sort); do
- DTB=$(echo "$DTB" | tr '/' '_')
- DTBS="$DTBS $DTB"
- fitimage_emit_section_dtb $1 $DTB "${EXTERNAL_KERNEL_DEVICETREE}/$DTB"
+ DTB=$(echo "${DTB}" | tr '/' '_')
+ DTBS="${DTBS} ${DTB}"
+ fitimage_emit_section_dtb ${1} ${DTB} "${EXTERNAL_KERNEL_DEVICETREE}/${DTB}"
done
fi
@@ -542,7 +542,7 @@ fitimage_assemble() {
if [ -e "${STAGING_DIR_HOST}/boot/${UBOOT_ENV_BINARY}" ]; then
cp ${STAGING_DIR_HOST}/boot/${UBOOT_ENV_BINARY} ${B}
bootscr_id="${UBOOT_ENV_BINARY}"
- fitimage_emit_section_boot_script $1 "$bootscr_id" ${UBOOT_ENV_BINARY}
+ fitimage_emit_section_boot_script ${1} "${bootscr_id}" ${UBOOT_ENV_BINARY}
else
bbwarn "${STAGING_DIR_HOST}/boot/${UBOOT_ENV_BINARY} not found."
fi
@@ -553,7 +553,7 @@ fitimage_assemble() {
#
if [ -e arch/${ARCH}/boot/setup.bin ]; then
setupcount=1
- fitimage_emit_section_setup $1 $setupcount arch/${ARCH}/boot/setup.bin
+ fitimage_emit_section_setup ${1} "${setupcount}" arch/${ARCH}/boot/setup.bin
fi
#
@@ -562,30 +562,27 @@ fitimage_assemble() {
if [ "x${ramdiskcount}" = "x1" ] && [ "${INITRAMFS_IMAGE_BUNDLE}" != "1" ]; then
# Find and use the first initramfs image archive type we find
for img in cpio.lz4 cpio.lzo cpio.lzma cpio.xz cpio.zst cpio.gz ext2.gz cpio; do
- initramfs_path="${DEPLOY_DIR_IMAGE}/${INITRAMFS_IMAGE_NAME}.$img"
- echo -n "Searching for $initramfs_path..."
- if [ -e "$initramfs_path" ]; then
- echo "found"
- fitimage_emit_section_ramdisk $1 "$ramdiskcount" "$initramfs_path"
+ initramfs_path="${DEPLOY_DIR_IMAGE}/${INITRAMFS_IMAGE_NAME}.${img}"
+ echo "Using $initramfs_path"
+ if [ -e "${initramfs_path}" ]; then
+ fitimage_emit_section_ramdisk ${1} "${ramdiskcount}" "${initramfs_path}"
break
- else
- echo "not found"
fi
done
fi
- fitimage_emit_section_maint $1 sectend
+ fitimage_emit_section_maint ${1} sectend
# Force the first Kernel and DTB in the default config
kernelcount=1
- if [ -n "$dtbcount" ]; then
+ if [ -n "${dtbcount}" ]; then
dtbcount=1
fi
#
# Step 6: Prepare a configurations section
#
- fitimage_emit_section_maint $1 confstart
+ fitimage_emit_section_maint ${1} confstart
# kernel-fitimage.bbclass currently only supports a single kernel (no less or
# more) to be added to the FIT image along with 0 or more device trees and
@@ -596,33 +593,33 @@ fitimage_assemble() {
# the default configuration to be used is based on the dtbcount. If there is
# no dtb present than select the default configuation to be based on
# the kernelcount.
- if [ -n "$DTBS" ]; then
+ if [ -n "${DTBS}" ]; then
i=1
for DTB in ${DTBS}; do
dtb_ext=${DTB##*.}
- if [ "$dtb_ext" = "dtbo" ]; then
- fitimage_emit_section_config $1 "" "$DTB" "" "$bootscr_id" "" "`expr $i = $dtbcount`"
+ if [ "${dtb_ext}" = "dtbo" ]; then
+ fitimage_emit_section_config ${1} "" "${DTB}" "" "${bootscr_id}" "" "`expr ${i} = ${dtbcount}`"
else
- fitimage_emit_section_config $1 $kernelcount "$DTB" "$ramdiskcount" "$bootscr_id" "$setupcount" "`expr $i = $dtbcount`"
+ fitimage_emit_section_config ${1} "${kernelcount}" "${DTB}" "${ramdiskcount}" "${bootscr_id}" "${setupcount}" "`expr ${i} = ${dtbcount}`"
fi
- i=`expr $i + 1`
+ i=`expr ${i} + 1`
done
else
defaultconfigcount=1
- fitimage_emit_section_config $1 $kernelcount "" "$ramdiskcount" "$bootscr_id" "$setupcount" $defaultconfigcount
+ fitimage_emit_section_config ${1} "${kernelcount}" "" "${ramdiskcount}" "${bootscr_id}" "${setupcount}" "${defaultconfigcount}"
fi
- fitimage_emit_section_maint $1 sectend
+ fitimage_emit_section_maint ${1} sectend
- fitimage_emit_section_maint $1 fitend
+ fitimage_emit_section_maint ${1} fitend
#
# Step 7: Assemble the image
#
${UBOOT_MKIMAGE} \
${@'-D "${UBOOT_MKIMAGE_DTCOPTS}"' if len('${UBOOT_MKIMAGE_DTCOPTS}') else ''} \
- -f $1 \
- arch/${ARCH}/boot/$2
+ -f ${1} \
+ arch/${ARCH}/boot/${2}
#
# Step 8: Sign the image and add public key to U-Boot dtb
@@ -639,7 +636,7 @@ fitimage_assemble() {
${@'-D "${UBOOT_MKIMAGE_DTCOPTS}"' if len('${UBOOT_MKIMAGE_DTCOPTS}') else ''} \
-F -k "${UBOOT_SIGN_KEYDIR}" \
$add_key_to_u_boot \
- -r arch/${ARCH}/boot/$2 \
+ -r arch/${ARCH}/boot/${2} \
${UBOOT_MKIMAGE_SIGN_ARGS}
fi
}
@@ -647,7 +644,7 @@ fitimage_assemble() {
do_assemble_fitimage() {
if echo ${KERNEL_IMAGETYPES} | grep -wq "fitImage"; then
cd ${B}
- fitimage_assemble fit-image.its fitImage ""
+ fitimage_assemble fit-image.its fitImage
fi
}
diff --git a/meta/classes/uboot-sign.bbclass b/meta/classes/uboot-sign.bbclass
index 8d136e9405..c39b30f43b 100644
--- a/meta/classes/uboot-sign.bbclass
+++ b/meta/classes/uboot-sign.bbclass
@@ -176,8 +176,8 @@ concat_dtb() {
mkdir -p ${DEPLOYDIR}
if [ -n "${UBOOT_CONFIG}" ]; then
for config in ${UBOOT_MACHINE}; do
- CONFIG_B_PATH="$config"
- cd ${B}/$config
+ CONFIG_B_PATH="${config}"
+ cd ${B}/${config}
concat_dtb_helper
done
else
@@ -193,8 +193,8 @@ concat_spl_dtb() {
mkdir -p ${DEPLOYDIR}
if [ -n "${UBOOT_CONFIG}" ]; then
for config in ${UBOOT_MACHINE}; do
- CONFIG_B_PATH="$config"
- cd ${B}/$config
+ CONFIG_B_PATH="${config}"
+ cd ${B}/${config}
concat_spl_dtb_helper
done
else
@@ -245,7 +245,7 @@ do_install:append() {
if [ "${PN}" = "${UBOOT_PN}" ]; then
if [ -n "${UBOOT_CONFIG}" ]; then
for config in ${UBOOT_MACHINE}; do
- cd ${B}/$config
+ cd ${B}/${config}
if [ "${UBOOT_SIGN_ENABLE}" = "1" -o "${UBOOT_FITIMAGE_ENABLE}" = "1" ] && \
[ -n "${UBOOT_DTB_BINARY}" ]; then
install_helper
@@ -300,19 +300,19 @@ addtask uboot_generate_rsa_keys before do_uboot_assemble_fitimage after do_compi
# Create a ITS file for the U-boot FIT, for use when
# we want to sign it so that the SPL can verify it
uboot_fitimage_assemble() {
- uboot_its="$1"
- uboot_nodtb_bin="$2"
- uboot_dtb="$3"
- uboot_bin="$4"
- spl_dtb="$5"
+ uboot_its="${1}"
+ uboot_nodtb_bin="${2}"
+ uboot_dtb="${3}"
+ uboot_bin="${4}"
+ spl_dtb="${5}"
uboot_csum="${UBOOT_FIT_HASH_ALG}"
uboot_sign_algo="${UBOOT_FIT_SIGN_ALG}"
uboot_sign_keyname="${SPL_SIGN_KEYNAME}"
- rm -f $uboot_its $uboot_bin
+ rm -f ${uboot_its} ${uboot_bin}
# First we create the ITS script
- cat << EOF >> $uboot_its
+ cat << EOF >> ${uboot_its}
/dts-v1/;
/ {
@@ -322,7 +322,7 @@ uboot_fitimage_assemble() {
images {
uboot {
description = "U-Boot image";
- data = /incbin/("$uboot_nodtb_bin");
+ data = /incbin/("${uboot_nodtb_bin}");
type = "standalone";
os = "u-boot";
arch = "${UBOOT_ARCH}";
@@ -332,34 +332,34 @@ uboot_fitimage_assemble() {
EOF
if [ "${SPL_SIGN_ENABLE}" = "1" ] ; then
- cat << EOF >> $uboot_its
+ cat << EOF >> ${uboot_its}
signature {
- algo = "$uboot_csum,$uboot_sign_algo";
- key-name-hint = "$uboot_sign_keyname";
+ algo = "${uboot_csum},${uboot_sign_algo}";
+ key-name-hint = "${uboot_sign_keyname}";
};
EOF
fi
- cat << EOF >> $uboot_its
+ cat << EOF >> ${uboot_its}
};
fdt {
description = "U-Boot FDT";
- data = /incbin/("$uboot_dtb");
+ data = /incbin/("${uboot_dtb}");
type = "flat_dt";
arch = "${UBOOT_ARCH}";
compression = "none";
EOF
if [ "${SPL_SIGN_ENABLE}" = "1" ] ; then
- cat << EOF >> $uboot_its
+ cat << EOF >> ${uboot_its}
signature {
- algo = "$uboot_csum,$uboot_sign_algo";
- key-name-hint = "$uboot_sign_keyname";
+ algo = "${uboot_csum},${uboot_sign_algo}";
+ key-name-hint = "${uboot_sign_keyname}";
};
EOF
fi
- cat << EOF >> $uboot_its
+ cat << EOF >> ${uboot_its}
};
};
@@ -379,8 +379,8 @@ EOF
#
${UBOOT_MKIMAGE} \
${@'-D "${SPL_MKIMAGE_DTCOPTS}"' if len('${SPL_MKIMAGE_DTCOPTS}') else ''} \
- -f $uboot_its \
- $uboot_bin
+ -f ${uboot_its} \
+ ${uboot_bin}
if [ "${SPL_SIGN_ENABLE}" = "1" ] ; then
#
@@ -389,8 +389,8 @@ EOF
${UBOOT_MKIMAGE_SIGN} \
${@'-D "${SPL_MKIMAGE_DTCOPTS}"' if len('${SPL_MKIMAGE_DTCOPTS}') else ''} \
-F -k "${SPL_SIGN_KEYDIR}" \
- -K "$spl_dtb" \
- -r $uboot_bin \
+ -K "${spl_dtb}" \
+ -r ${uboot_bin} \
${SPL_MKIMAGE_SIGN_ARGS}
fi
@@ -422,8 +422,8 @@ do_uboot_assemble_fitimage() {
kernel_uboot_fitimage_name=`basename ${STAGING_DATADIR}/u-boot-fitImage-*`
kernel_uboot_its_name=`basename ${STAGING_DATADIR}/u-boot-its-*`
cd ${B}
- uboot_fitimage_assemble $kernel_uboot_its_name ${UBOOT_NODTB_BINARY} \
- ${UBOOT_DTB_BINARY} $kernel_uboot_fitimage_name \
+ uboot_fitimage_assemble ${kernel_uboot_its_name} ${UBOOT_NODTB_BINARY} \
+ ${UBOOT_DTB_BINARY} ${kernel_uboot_fitimage_name} \
${SPL_DTB_BINARY}
fi
}
--
2.34.1
next reply other threads:[~2022-01-29 0:29 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-29 0:29 Marek Vasut [this message]
2022-01-29 1:06 ` [OE-core] [PATCH] Revert "featimage: refactor style" Peter Kjellerstedt
2022-01-29 1:38 ` Marek Vasut
2022-01-29 2:01 ` Peter Kjellerstedt
2022-01-29 2:36 ` Marek Vasut
2022-01-31 7:01 ` Valek, Andrej
2022-01-31 9:39 ` Marek Vasut
2022-02-02 6:51 ` Valek, Andrej
2022-02-02 8:17 ` Marek Vasut
2022-02-02 9:03 ` Valek, Andrej
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220129002907.84534-1-marex@denx.de \
--to=marex@denx.de \
--cc=andrej.valek@siemens.com \
--cc=openembedded-core@lists.openembedded.org \
--cc=richard.purdie@linuxfoundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox