From: <changqing.li@windriver.com>
To: <openembedded-core@lists.openembedded.org>
Subject: [PATCH] eudev: create static nodes from modules
Date: Thu, 12 May 2022 13:43:03 +0800 [thread overview]
Message-ID: <20220512054303.429208-1-changqing.li@windriver.com> (raw)
From: Changqing Li <changqing.li@windriver.com>
dev in modules.devname should be populated in /dev on boot.
remove create static mode from udevd will make these devices
cannot be populated. When use sysVinit, devices like /dev/net/tun
will not be created.
more info:
udevd in systemd also remove create static mode in udevd, but using
service kmod-static-nodes.service and
systemd-tmpfiles-setup-dev.service in systemd to create these node, so
systemd works well.
Signed-off-by: Changqing Li <changqing.li@windriver.com>
---
...dev-create-static-nodes-from-modules.patch | 115 ++++++++++++++++++
meta/recipes-core/udev/eudev_3.2.11.bb | 1 +
2 files changed, 116 insertions(+)
create mode 100644 meta/recipes-core/udev/eudev/0001-eudev-create-static-nodes-from-modules.patch
diff --git a/meta/recipes-core/udev/eudev/0001-eudev-create-static-nodes-from-modules.patch b/meta/recipes-core/udev/eudev/0001-eudev-create-static-nodes-from-modules.patch
new file mode 100644
index 0000000000..19611f4e89
--- /dev/null
+++ b/meta/recipes-core/udev/eudev/0001-eudev-create-static-nodes-from-modules.patch
@@ -0,0 +1,115 @@
+From 573d6c4106d5b3828da43d2843c1d599ae3cd1cd Mon Sep 17 00:00:00 2001
+From: Changqing Li <changqing.li@windriver.com>
+Date: Tue, 10 May 2022 14:04:35 +0800
+Subject: [PATCH] eudev: create static nodes from modules
+
+Revert commit <src/udev/udevd.c: remove create static nodes from modules>
+https://gitweb.gentoo.org/proj/eudev.git/commit/?id=2b7abd5ec9cc47a8b895df6db77fb1537c6f1a39
+
+Upstream-Status: Inappropriate [oe-specific]
+
+Upstream intentionally remove create static nodes from modules, it is
+expected handled by tmpfiles services, refer [1].
+[1] https://github.com/eudev-project/eudev/issues/229
+
+For yocto, when start with sysVinit, to enable systemd distro feature,
+and install systemd-tmpfiles is not proper, so revert this commit.
+
+Signed-off-by: Li Zhou <li.zhou@windriver.com>
+Signed-off-by: Changqing Li <changqing.li@windriver.com>
+---
+ src/udev/udevd.c | 71 ++++++++++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 71 insertions(+)
+
+diff --git a/src/udev/udevd.c b/src/udev/udevd.c
+index 7ffd174..ff53fe4 100644
+--- a/src/udev/udevd.c
++++ b/src/udev/udevd.c
+@@ -993,6 +993,76 @@ static void handle_signal(struct udev *udev, int signo) {
+ }
+ }
+
++static void static_dev_create_from_modules(struct udev *udev) {
++ struct utsname kernel;
++ char modules[UTIL_PATH_SIZE];
++ char buf[4096];
++ FILE *f;
++
++ if (uname(&kernel) < 0) {
++ log_error("uname failed: %m");
++ return;
++ }
++
++ strscpyl(modules, sizeof(modules), ROOTPREFIX "/lib/modules/", kernel.release, "/modules.devname", NULL);
++ f = fopen(modules, "re");
++ if (f == NULL)
++ return;
++
++ while (fgets(buf, sizeof(buf), f) != NULL) {
++ char *s;
++ const char *modname;
++ const char *devname;
++ const char *devno;
++ int maj, min;
++ char type;
++ mode_t mode;
++ char filename[UTIL_PATH_SIZE];
++
++ if (buf[0] == '#')
++ continue;
++
++ modname = buf;
++ s = strchr(modname, ' ');
++ if (s == NULL)
++ continue;
++ s[0] = '\0';
++
++ devname = &s[1];
++ s = strchr(devname, ' ');
++ if (s == NULL)
++ continue;
++ s[0] = '\0';
++
++ devno = &s[1];
++ s = strchr(devno, ' ');
++ if (s == NULL)
++ s = strchr(devno, '\n');
++ if (s != NULL)
++ s[0] = '\0';
++ if (sscanf(devno, "%c%u:%u", &type, &maj, &min) != 3)
++ continue;
++
++ mode = 0600;
++ if (type == 'c')
++ mode |= S_IFCHR;
++ else if (type == 'b')
++ mode |= S_IFBLK;
++ else
++ continue;
++
++ strscpyl(filename, sizeof(filename), "/dev/", devname, NULL);
++ mkdir_parents_label(filename, 0755);
++ mac_selinux_create_file_prepare(filename, mode);
++ log_debug("mknod '%s' %c%u:%u", filename, type, maj, min);
++ if (mknod(filename, mode, makedev(maj, min)) < 0 && errno == EEXIST)
++ utimensat(AT_FDCWD, filename, NULL, 0);
++ mac_selinux_create_file_clear();
++ }
++
++ fclose(f);
++}
++
+ /*
+ * read the kernel command line, in case we need to get into debug mode
+ * udev.log-priority=<level> syslog priority
+@@ -1199,6 +1269,7 @@ int main(int argc, char *argv[]) {
+ }
+
+ dev_setup(NULL, UID_INVALID, GID_INVALID);
++ static_dev_create_from_modules(udev);
+
+ /* before opening new files, make sure std{in,out,err} fds are in a sane state */
+ if (arg_daemonize) {
+--
+2.25.1
+
diff --git a/meta/recipes-core/udev/eudev_3.2.11.bb b/meta/recipes-core/udev/eudev_3.2.11.bb
index 841039f6d7..deb6c90a82 100644
--- a/meta/recipes-core/udev/eudev_3.2.11.bb
+++ b/meta/recipes-core/udev/eudev_3.2.11.bb
@@ -12,6 +12,7 @@ PROVIDES = "udev"
SRC_URI = "https://github.com/eudev-project/${BPN}/releases/download/v${PV}/${BP}.tar.gz \
file://init \
file://local.rules \
+ file://0001-eudev-create-static-nodes-from-modules.patch \
"
SRC_URI[sha256sum] = "19847cafec67897da855fde56f9dc7d92e21c50e450aa79068a7e704ed44558b"
--
2.25.1
next reply other threads:[~2022-05-12 5:43 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-12 5:43 changqing.li [this message]
2022-05-12 7:45 ` [OE-core] [PATCH] eudev: create static nodes from modules Alex Kiernan
2022-05-12 10:33 ` richard.purdie
2022-05-13 1:42 ` Li, Changqing
2022-05-15 14:59 ` Alex Kiernan
2022-05-16 5:35 ` Li, Changqing
2022-05-16 8:06 ` Alex Kiernan
[not found] ` <16EF875D3CF1EBA0.26893@lists.openembedded.org>
2022-05-16 13:25 ` Alex Kiernan
2022-05-17 1:07 ` Li, Changqing
-- strict thread matches above, loose matches on Subject: below --
2018-04-19 6:35 Li Zhou
2018-06-04 2:23 ` Zhou, Li
2018-07-12 2:22 ` Changqing Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220512054303.429208-1-changqing.li@windriver.com \
--to=changqing.li@windriver.com \
--cc=openembedded-core@lists.openembedded.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox