From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: Pavel Zhukov <pavel@zhukoff.net>
Cc: openembedded-core@lists.openembedded.org
Subject: Re: [OE-core] [PATCH 1/3] dummy-sdk-package.inc: Filter packages which are marked for installation
Date: Thu, 5 Oct 2023 21:28:48 +0200 [thread overview]
Message-ID: <202310051928481b3031dd@mail.local> (raw)
In-Reply-To: <20231004161318.576312-1-pavel@zhukoff.net>
Hello,
This series causes the following failure:
https://autobuilder.yoctoproject.org/typhoon/#/builders/20/builds/8312/steps/12/logs/stdio
| Can't locate Text/Tabs.pm in @INC (you may need to install the Text::Tabs module) (@INC entries checked: /home/pokybuild/yocto-worker/buildtools/build/build/tmp/work/x86_64-nativesdk-pokysdk-linux/buildtools-extended-tarball/1.0/testimage-sdk/bitbake-build-2946y_hb/tmp/work/x86_64-linux/automake-native/1.16.5/build/lib/ /home/pokybuild/yocto-worker/buildtools/build/build/tmp/work/x86_64-nativesdk-pokysdk-linux/buildtools-extended-tarball/1.0/testimage-sdk/bitbake-build-2946y_hb/tmp/work/x86_64-linux/automake-native/1.16.5/build/../automake-1.16.5/lib/ /home/pokybuild/yocto-worker/buildtools/build/build/tmp/work/x86_64-nativesdk-pokysdk-linux/buildtools-extended-tarball/1.0/testimage-sdk/sysroots/x86_64-pokysdk-linux/usr/bin/../..//usr/lib/perl5/site_perl/5.38.0/x86_64-linux /home/pokybuild/yocto-worker/buildtools/build/build/tmp/work/x86_64-nativesdk-pokysdk-linux/buildtools-extended-tarball/1.0/testimage-sdk/sysroots/x86_64-pokysdk-linux/usr/bin/../..//usr/lib/perl5/site_perl/5.38.0 /home/pokybuild/yocto-worker/buildtools/build/build/tmp/work/x86_64-nativesdk-pokysdk-linux/buildtools-extended-tarball/1.0/testimage-sdk/sysroots/x86_64-pokysdk-linux/usr/bin/../..//usr/lib/perl5/vendor_perl/5.38.0 /home/pokybuild/yocto-worker/buildtools/build/build/tmp/work/x86_64-nativesdk-pokysdk-linux/buildtools-extended-tarball/1.0/testimage-sdk/sysroots/x86_64-pokysdk-linux/usr/bin/../..//usr/lib/perl5/5.38.0/x86_64-linux /home/pokybuild/yocto-worker/buildtools/build/build/tmp/work/x86_64-nativesdk-pokysdk-linux/buildtools-extended-tarball/1.0/testimage-sdk/sysroots/x86_64-pokysdk-linux/usr/bin/../..//usr/lib/perl5/5.38.0 /usr/local/oe-sdk-hardcoded-buildpath/sysroots/x86_64-pokysdk-linux/usr/lib/perl5/site_perl/5.38.0/x86_64-linux /usr/local/oe-sdk-hardcoded-buildpath/sysroots/x86_64-pokysdk-linux/usr/lib/perl5/site_perl/5.38.0 /usr/local/oe-sdk-hardcoded-buildpath/sysroots/x86_64-pokysdk-linux/usr/lib/perl5/vendor_perl/5.38.0/x86_64-linux /usr/local/oe-sdk-hardcoded-buildpath/sysroots/x86_64-pokysdk-linux/usr/lib/perl5/vendor_perl/5.38.0 /usr/local/oe-sdk-hardcoded-buildpath/sysroots/x86_64-pokysdk-linux/usr/lib/perl5/5.38.0/x86_64-linux /usr/local/oe-sdk-hardcoded-buildpath/sysroots/x86_64-pokysdk-linux/usr/lib/perl5/5.38.0) at ../automake-1.16.5/doc/help2man line 28.
| BEGIN failed--compilation aborted at ../automake-1.16.5/doc/help2man line 28.
| make: *** [Makefile:3741: doc/aclocal-1.16.1] Error 2
| make: *** Waiting for unfinished jobs....
| if LC_ALL=C grep '@[a-zA-Z0-9_][a-zA-Z0-9_]*@' runtest-t; then echo "runtest contains unexpanded substitution (see lines above)"; exit 1; fi; chmod a-w runtest-t && mv -f runtest-t runtest
| Can't locate Text/Tabs.pm in @INC (you may need to install the Text::Tabs module) (@INC entries checked: /home/pokybuild/yocto-worker/buildtools/build/build/tmp/work/x86_64-nativesdk-pokysdk-linux/buildtools-extended-tarball/1.0/testimage-sdk/bitbake-build-2946y_hb/tmp/work/x86_64-linux/automake-native/1.16.5/build/lib/ /home/pokybuild/yocto-worker/buildtools/build/build/tmp/work/x86_64-nativesdk-pokysdk-linux/buildtools-extended-tarball/1.0/testimage-sdk/bitbake-build-2946y_hb/tmp/work/x86_64-linux/automake-native/1.16.5/build/../automake-1.16.5/lib/ /home/pokybuild/yocto-worker/buildtools/build/build/tmp/work/x86_64-nativesdk-pokysdk-linux/buildtools-extended-tarball/1.0/testimage-sdk/sysroots/x86_64-pokysdk-linux/usr/bin/../..//usr/lib/perl5/site_perl/5.38.0/x86_64-linux /home/pokybuild/yocto-worker/buildtools/build/build/tmp/work/x86_64-nativesdk-pokysdk-linux/buildtools-extended-tarball/1.0/testimage-sdk/sysroots/x86_64-pokysdk-linux/usr/bin/../..//usr/lib/perl5/site_perl/5.38.0 /home/pokybuild/yocto-worker/buildtools/build/build/tmp/work/x86_64-nativesdk-pokysdk-linux/buildtools-extended-tarball/1.0/testimage-sdk/sysroots/x86_64-pokysdk-linux/usr/bin/../..//usr/lib/perl5/vendor_perl/5.38.0 /home/pokybuild/yocto-worker/buildtools/build/build/tmp/work/x86_64-nativesdk-pokysdk-linux/buildtools-extended-tarball/1.0/testimage-sdk/sysroots/x86_64-pokysdk-linux/usr/bin/../..//usr/lib/perl5/5.38.0/x86_64-linux /home/pokybuild/yocto-worker/buildtools/build/build/tmp/work/x86_64-nativesdk-pokysdk-linux/buildtools-extended-tarball/1.0/testimage-sdk/sysroots/x86_64-pokysdk-linux/usr/bin/../..//usr/lib/perl5/5.38.0 /usr/local/oe-sdk-hardcoded-buildpath/sysroots/x86_64-pokysdk-linux/usr/lib/perl5/site_perl/5.38.0/x86_64-linux /usr/local/oe-sdk-hardcoded-buildpath/sysroots/x86_64-pokysdk-linux/usr/lib/perl5/site_perl/5.38.0 /usr/local/oe-sdk-hardcoded-buildpath/sysroots/x86_64-pokysdk-linux/usr/lib/perl5/vendor_perl/5.38.0/x86_64-linux /usr/local/oe-sdk-hardcoded-buildpath/sysroots/x86_64-pokysdk-linux/usr/lib/perl5/vendor_perl/5.38.0 /usr/local/oe-sdk-hardcoded-buildpath/sysroots/x86_64-pokysdk-linux/usr/lib/perl5/5.38.0/x86_64-linux /usr/local/oe-sdk-hardcoded-buildpath/sysroots/x86_64-pokysdk-linux/usr/lib/perl5/5.38.0) at ../automake-1.16.5/doc/help2man line 28.
| BEGIN failed--compilation aborted at ../automake-1.16.5/doc/help2man line 28.
| make: *** [Makefile:3743: doc/automake-1.16.1] Error 2
| if LC_ALL=C grep '@[a-zA-Z0-9_][a-zA-Z0-9_]*@' t/ax/shell-no-trail-bslash-t; then echo "t/ax/shell-no-trail-bslash contains unexpanded substitution (see lines above)"; exit 1; fi; chmod a-w t/ax/shell-no-trail-bslash-t && mv -f t/ax/shell-no-trail-bslash-t t/ax/shell-no-trail-bslash
| ERROR: oe_runmake failed
| WARNING: exit code 1 from a shell command.
On 04/10/2023 18:13:16+0200, Pavel Zhukov wrote:
> if packages is provided by dummysdk and in the same time marked for
> installation with IMAGE_INSTALL it causes conflict in apt because virtual providers are
> not taken into account if package is asked to be installed explicitly.
> Filter such packages from provides/conflicts to workaround this problem.
> This workaround brakes RPM usecase because of file conlicts with
> DUMMYPROVIDES, use DUMMYPROVIDES_PACKAGES_MULTILIB instead (which
> doesn't include file based conflicts).
> While this is needed for the case of package_deb only adding it for all
> package managers to not complicate the code.
>
> Fixes: [Yocto #13338] [Yocto #14066]
>
> Fixes:
> The following information may help to resolve the situation:
>
> The following packages have unmet dependencies:
> target-sdk-provides-dummy : Conflicts: bash
> E: Unable to correct problems, you have held broken packages.
>
> Signed-off-by: Pavel Zhukov <pavel@zhukoff.net>
> ---
> meta/recipes-core/meta/dummy-sdk-package.inc | 5 +++--
> 1 file changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/meta/recipes-core/meta/dummy-sdk-package.inc b/meta/recipes-core/meta/dummy-sdk-package.inc
> index bd26e39ad3..6ccafbf8bc 100644
> --- a/meta/recipes-core/meta/dummy-sdk-package.inc
> +++ b/meta/recipes-core/meta/dummy-sdk-package.inc
> @@ -19,13 +19,14 @@ PR[vardeps] += "DUMMYPROVIDES"
> PR[vardeps] += "DUMMYPROVIDES_PACKAGES"
>
> DUMMYPROVIDES_PACKAGES ??= ""
> -DUMMYPROVIDES_PACKAGES_MULTILIB = "${@' '.join([multilib_pkg_extend(d, pkg) for pkg in d.getVar('DUMMYPROVIDES_PACKAGES').split()])}"
> +DUMMYPROVIDES_PACKAGES_FILTERED = "${@' '.join([pkg for pkg in d.getVar('DUMMYPROVIDES_PACKAGES').split() if d.getVar('IMAGE_INSTALL') is not None and pkg not in d.getVar('IMAGE_INSTALL').split()])}"
> +DUMMYPROVIDES_PACKAGES_MULTILIB = "${@' '.join([multilib_pkg_extend(d, pkg) for pkg in d.getVar('DUMMYPROVIDES_PACKAGES_FILTERED').split()])}"
> DUMMYPROVIDES += "${DUMMYPROVIDES_PACKAGES_MULTILIB}"
>
> python populate_packages:prepend() {
> p = d.getVar("PN")
> d.appendVar("RPROVIDES:%s" % p, "${DUMMYPROVIDES}")
> - d.appendVar("RCONFLICTS:%s" % p, "${DUMMYPROVIDES}")
> + d.appendVar("RCONFLICTS:%s" % p, "${DUMMYPROVIDES_PACKAGES_MULTILIB}")
> d.appendVar("RREPLACES:%s" % p, "${DUMMYPROVIDES_PACKAGES_MULTILIB}")
> }
>
> --
> 2.41.0
>
>
> -=-=-=-=-=-=-=-=-=-=-=-
> Links: You receive all messages sent to this group.
> View/Reply Online (#188690): https://lists.openembedded.org/g/openembedded-core/message/188690
> Mute This Topic: https://lists.openembedded.org/mt/101758725/3617179
> Group Owner: openembedded-core+owner@lists.openembedded.org
> Unsubscribe: https://lists.openembedded.org/g/openembedded-core/unsub [alexandre.belloni@bootlin.com]
> -=-=-=-=-=-=-=-=-=-=-=-
>
--
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
next prev parent reply other threads:[~2023-10-05 19:28 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-04 16:13 [PATCH 1/3] dummy-sdk-package.inc: Filter packages which are marked for installation Pavel Zhukov
2023-10-04 16:13 ` [PATCH 2/3] package_deb: Revert versioned providers workaround Pavel Zhukov
2023-10-04 16:13 ` [PATCH 3/3] selftest: Add tests for populate_sdk task Pavel Zhukov
2023-10-05 19:28 ` Alexandre Belloni [this message]
2023-10-06 6:37 ` [OE-core] [PATCH 1/3] dummy-sdk-package.inc: Filter packages which are marked for installation Pavel Zhukov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=202310051928481b3031dd@mail.local \
--to=alexandre.belloni@bootlin.com \
--cc=openembedded-core@lists.openembedded.org \
--cc=pavel@zhukoff.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox